Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹16.4 L+₹1.1 L (7.43%)Rejected-Finance DHALIWAL | FIROZEPUR | PUNJAB | 142044 | L2 | Rejected-Finance Second lowest bidder |
Tender Value
₹11.4 L
EMD Value
₹22,900
Closing Date
23 Feb 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HPSIDC Shimla
Construction of 1No. RCC Over Head Water Storage Tank having 10.00 mtr staging height and distribution line for residential DIC Colony Una Distt. Una (HP).
2023_SIDC_68953_1
Job No. 10
Open Tender
Civil Works
Item Rate
180 days
Una
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,300
₹22,900
21 Aug 2023
16 Feb 2023
24 Feb 2023
16 Feb 2023
23 Feb 2023
16 Feb 2023
Amount
Excavation in foundation trenches etc.in all classification of soil in dry or saturated condition upto any depth and lift including pumping and bailing out water where required i/c stacking the seviceable material and un- servicealbe material separate as directed and then returning the stacked soil in 15 cm layers when required into plinth and sides of foundation etc. consolidating each deposited layer by ramming,watering and then disposing of all surplus excavated earth as directed by Engineer in chanrge including carriage of material in all leads and lifts disposed material to be neatly dressed leveled as per instructions of the Engineer in charge.
Providing and laying cement concrete 1:3:6(1cement: 3sand: 6 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material within all leads and lifts.
Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish including centring,shuttering strutting and propping etc. wooden batten and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu reinforced and plain concrete in:- including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (a) Foundation, footings basis of columns etc. and mass concrete including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Columns, pillars, post and struts square or circular or curved in plan all heights.
Beams,cantilever, girders and lintels sides and soffits of beams, beam haunchings, cantilever,girders, bressumers and lintels not exceeding 1mtr. In depth.upto all heights. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Flat surfaces such as soffits or suspended floors, roofs,landings and the like floor etc.upto 200mm in thickness up to all heights. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Arches ,Dome ,Vaults etc. up to all heights. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. Circular in plan up to all heights including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Stair cases with sloping or stepped soffits excluding landings up to all heights.including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Providing and laying cement concrete work 1:1.5:3 (1 Cement :1.5 Sand :3 graded stone aggregate 20mm nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material within all leads and lifts in:- (a) Foundation footings,bases of columns etc.and mass concrete .including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Circular Column, pillars, posts and struts up to all heights including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
suspended floors,roors,landings,shelves and their supports balconies. beams,girders,bressumers and cantillever upto all heights..including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto all heights. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Arches ,Dome etc. upto all heights. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
In Wall (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth&string courses etc.from top of foundation level upto all heights .Circular wall. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Providing tor steel reinforcement for RCC work including bending binding and placing in position in all heights. By Using Tata Steel including carriage of material within all leads and lifts.
Providing and laying cement concrete work 1:2:4(1cement: 2sand:4graded crushed stone agg.20mm nominal size)and laid in one layer finished with floating coat of neat cement slurry 50mm thick including carriage of material within all leads and lifts.
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Steel work welded in built up sections,trusses and framed work including cutting,hoistingm,fixing in position and applying a priming coat of read lead paint in:- In beams joists channels,angles,tees,flats with connection plates or angle cleats as in main and cross beams,hip,jack raffers, purlins connected to common rafters and the like including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Painting two coats(excluding priming coat) on new Steel and other Steel surfaces with enamal paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter,sand papering and stopping with enamel paint other then white including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Providing and Fixing GMS tube (medium grade) fitting (earth work to be measured and paid for separetely) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (a) 40 mm dia nominal bore
(b) 32 mm nominal dia.
© 25 mm nominal dia.
(d) 65 mm nominal dia.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (a) 65 mm nominal bore
(b) 40 mm nominal bore
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Providing and fixing M.S flanges using table 21 including required Nuts, Bolts,and rubber geskets washer complete in all respect. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (a) 40 mm dia nominal bore
(b) 32 mm nominal dia.
(c) 65 mm nominal dia.
Om Parkash Govt Contrator
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .