Providing and fixing of sanitary fittings works in Multipurpose Indoor Sports Hall at Kishtwar.

Amount

Pluming , Sanitary Installations:-

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing G.I inlet connection for flush pipe connecting with W.C. pan.

Providing and fixing wash basin with C.I/M.S. brackets, 15mm C.P. brass taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whenever required:

White vitreous china wash basin size 630 x 450 mm with a pair of 15mm C.P brass pillar taps.

Round basin 405 x 355 mm with single 15mm C.P. brass pillar trap.

Providing and fixing white vitreous cement china pedestal wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes r~spectively.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard.

Rectangular shape 453x357mm

Ractangular shape 1500x 450mm

Providing and fixing 600x120x5mm glass shelf with edge round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.

Providing and fixing white viterous china laboratory sink including making all connection excluding cost of fitting:

Size 450 x 300 x 150 mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Semi rigid pipe 40mm dia

Flexible pipe 40mm dia

(B). C.P. Fitting

Providing and fixing of 15 mm CP bib cock of approved make ( Jaquar make) having code no. CON CHR 037 confirming to IS 2980

Providing and fixing of CP Angle value of Jaquar make having code no. CON CHR053

Providing and fixing of 15 mm C.P. brass long nose bib cock of approvedmake (Jagvar make) having code no. CON CHR 307 confirming to IS 2980

Providing and fixing of CP mixer of approved make having code no. 167 B

Providing and fixing of 600 mm long tower rail of approved make having code no. 1111

Providing and fixing of scuare tower ring having code no. 1121

Providing and fixing of CP soap dish of approved make having code no. 1131 N

Providing and fixing of CP paper holder of approved made with necessar screw and plastic gatti make having code no. 1151

Providing and fix of CP shower of approved make having code no. 1799 incl. shower arm

Providing and fixing 10mm sand CP grating for gully, floor or nahani trap.

Providing and fixing in position 40mm diameter mosquito proof couping of approved municipal design.

Providing and fixing of CP neeple of approved make

Providing and fixing trap of self cleaning design with screwed down or hinged grating with or with or without vent arm complete, including cost of cutting and making good the walls and floors:

100mm inlet and 100mm outlet sand cast iron S&S as per IS: 1729

100mm inlet and 75mm outlet sand cast iron S&S as per IS: 1729

Providing installation and testing of Geyser of approved quality and manufacture jagwar make mounted on boltd, well anchored in wall and connected with hot and cold G.I. connection with superior angle values as required: (25 litres capacity)

( C). Water Supply, CP Fittings, Disposal System:-

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good walls.

15mm dia nominal bore (medium)

20mm dia nominal bore (medium)

Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall

15mm dia nominal bore.

20mm dia nominal bore.

Providing and fixing G.I pipes complete with G.I fittings and clamps, trenching and refilling etc. (external work)(25mm dia nominal bore.)

Making connection of G.I distributing branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete.and making long screws etc. complete. (25 to 40mm nominal bore)

Fixing water meter and stop cock G.Ipipe line including cutting and threading the pipe and making long screws etc. complete. (cost of water meter and stop cock to be paid separately) (20 mm to 25 mm)

Providing and fixing ball value (brass) of approved quality complete. High or low pressure with plastic floats.

20 mm nominal bore

15 mm nominal bore

Providing and fixing gun metal non-return value with of approved quality (screwed end) (25 mm nominal bore (vertical)

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Providing and fixing of PVC pipe of 4Kg/ Cm Square of approved make ( Spureme) for carring disposal of seat and waste water of wash basin etc. incl. scalfoliding complete.

Providing and fixing PVC floor trape of supreme make of size 100x 75

Providing and fixing of PVC collar of approved make of supreme make

Providing and fixing of PVC plain bend of supreme make

Providing and fixing of steel clamp of good quality incl. fixing the screws and making good the wall

Providing and fixing of PVC Door bend of supreme make

Providing and fixing of PVC door Tee

Providing and filling of joints in PVC pipe with solution and ring of required size

Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), including finished complete so as to make it leak proof.(Including all leads, lifts, carriages etc).

Making hole up to 20x20 cm and embedding pipes up to 150mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20mm nominal size) including disposal of malba.(Including all leads, lifts, carriages etc).

(D). Sewer Line

Excavating trenches of required width for pipes, cables. All kinds of soil-(a) pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) aii-round S.W. pipes including bed concrete as per standard design: ( for150mm diameter S. W. pipe) crushed (Including all leads, lifts, carriages etc).

Providing and lying of cement concerte in 1:3:6 mix ( 1 cement : 3 coarse sand: 6 graded stone aggregate) using 20 mm nominal size aggregate for in encasing of pipe ( Crushed)(Including all leads, lifts, carriages etc).

Centring and shuttermg including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete. (for in casing of pipe)

(D) Providing laying and jointing glazed stone were pipes Grade-A with stiff mixture of cement mortor in poporattion 1:1 incl. testing of joint complete (150mm)

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4, C.I. cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame not less than 38kgs, R.C.C. top slab with 1:2:4 mix, foundation concrete 1:5:10, inside plastering 12mm thick with cement mortar 1:3, finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.(Including all leads, lifts, carriages etc).

Inside dimension 455x610m and 40cm deep for single pipe line with common burnt clay bricks

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type.

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supplying and fixing C.I. cover without frame for manholes:

455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

Supplying and fixing C.I. cover 300x300mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix ( 1 cement : 2 coarse sand:4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement :2 coarse sand: 4 graded stone aggegate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.(Including all leads, lifts, carriages etc).

Inside size 90x80 cm and 45 Cm deep incl. C.I cover with frame ( light duty) 455x610 mm internal diamensions total weight of cover and frame to be not less than 38 Kg ( weight of cover 23 Kg and weight of frame 15 Kg)With F.P.S bricks with class designation 75 and with Crushed stone aggregate

Inside size 90x80 cm and 60 Cm deep incl. C.I cover with frame ( light duty) 455x610 mm internal diamensions total weight of cover and frame to be not less than 38 Kg ( weight of cover 23 Kg and weight of frame 15 Kg)

Inside size 120 x 90 cm and 90 Cm deep incl. C.I cover with frame ( medium duty) 500 mm internal diamensions total weight of cover and frame to be not less than 116 Kg ( weight of cover 58 Kg and weight of frame 58 Kg)

Construction of soakage pit having clear internal dia 15 feet and clear depth 6 Feet incl. Providing and laying of 100 mm thick stone concrete in mix 1:4:8 in the entire bed, providing and laying of outer ring beam of size 9"x 18" Incl. RCC reinforecement and form work, providing honey comb masonry 9 inch thick, in the outer ring beam and chimney upto 6 feet height,incl. filling of brick bats in layers , and lying of RCC slab in M-25 incl. reinforecement and also providing CI frame and cover also including earth work in the entire pit incl. disposal of mulba obtained from cutting with lead upto 50 m.( complete job).

Javeed Iqbal Ahanger

MR. JEHANGIR AHMAD BUTT