Construction of an MS container shop (20.0x8.50x9.0 ft) for food stalls in the vending zone located near the stadium.

Photography work etc.

MS FABRICATED SHOP CONTAINER OF SIZE (20’X8.5’X9’) including walking path with floor on container roof and staires for aproch on roof 01- Bottom Frame- 100mmx50mm Squire pipe ISI Marked. 02- Top Frame- 50mmx50mm MS Square Pipe ISI Marked. 03- Stiffener Bottom - 100mmx50mm C channel, 100mmx50mm, 50mmx50mm MS square pipes & Angles ISI Marked. 04- Stiffener Top - 50mmx50mm, 50mmx25mm, 25mmx25mm MS square pipe ISI Marked. 05- Side Post- 50mmx50mm, 50mmx25mm, MS square pipe ISI Marked. 06- Side Wall Stiffeners- Specially formed CR sheets of thickness 1.2mm. 07- Paneling Outside - Specially formed CR sheets of thickness 1.2mm. 08- Internal Wall Paneling - 7.5mm thick MDF of make & all vertically and horizontal corners will be neatly and smoothly Finished with Aluminum sections & L angles. 09- Roof Outside - 1mm thick sheet properly sloped & water tight. 10- False Ceiling - 7.5mm thick MDF of make & all vertically and horizontal corners will be neatly and smoothly Finished with Aluminum sections & L angles. 11- Flooring- 18mm thick Cemented board of make VISAKA INDUSTRIES will be fixed by means of self-taping screw & 0.8 mm thick PVC vinyl Carpet will be fixed on the panel. (100% water, termite & dimensional proof with vinyl Carpet). 12- Door- The door will be of external opening type made out of the same material as wall panels & canopy above the door. Frame work by tubular pipe of 25 x 25. Door with locks & handles with hydraulic door closer. 13-Insulation- 25mm thick glass wool insulation of density 64kg/m3 on side wall & 25mm on ceiling. Only applicable for interior finishing container. 14-Wiring- All wiring will be concealed with PVC insulated copper wires of ISI quality, suitable for 240volt, 50 HZ single phase AC power supply. 15-Electrical Fittings- A- All electrical fittings in portable cabin shall be 220- 240V.AC 50Hz. B- LED Tube lights, Bulkhead, Fan, switches & Sockets of ISI MAKE C- Split Air conditioner point along with separate MCB. 16-Earthing- Earthing point will be provided for safety. 17-Outside Painting- Phosphate the cabin and painting with 1 coat of animal primer with 2 coats of animal Paint. 18- Hools- Specially formed hooks for easy lifting and shifting.