Repair and Renovation Of DC Residence At Khanabal

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single J double glass panes, wire mesh and silicon sealent shall be paid separately). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 +0.2 mm and single glazing bead J double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). French Window Fiesta Make

Providing and fixing factory made uPVC white colour casements Casement cum fixed glazed door comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawin{ & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm) Fiesta Make

Providing and fixing double glazed hermetically glazing in aluminium windows,ventilators and partitions etc,.with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket.perforated aluminium spacers,desicants,silicon sealant(both primary and secondry sealant)etc,. as per specifications,drawing and Engineer-in-charge complete.

Providing & fixing wood work in frames of doors, windows & other frames, wrought framed & fixed in position including SS expansion fastners for brick/concrete work in (including cost of all material, leads, lifts & carriages etc upto site of work complete). Imported wood

Providing and fixing at all height wall panelling with 18 MDF Baord wood on Budloo frame work & 12mm thick BWP ply board and fixing to frame work made of 50mm x 50mm hardwood plugs and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge.

Providing and fixing in position factory-made / site-fabricated built-in cupboards, almirahs and shelving units of approved size, layout and design, fabricated out of waterproof commercial grade plywood conforming to relevant IS standards, using 19mm thick plywood for shutters, sides, top and bottom panels, 12mm thick plywood for shelves and intermediate members and 6mm thick plywood for back paneling, finished on all exposed external faces with 2mm thick decorative laminate (Dulmicka) of approved shade and pattern duly bonded with approved adhesive, and finishing internal faces with 0.8mm laminate / synthetic enamel as approved, including providing and fixing all necessary fittings and fixtures such as auto hinges, magnetic catches, locking arrangements, handles, tower bolts, drawer channels, shelf supports, PVC edge banding, screws, buffers and approved hardware, including cutting, grooving, edge finishing, alignment, shutter fixing and all incidental works, complete in all respects as per approved design and direction of Engineer-in-Charge.

Providing and applying approved make decorative finish (Deco Paint) on interior / exterior wall surfaces by spray gun application, over properly prepared surface including cleaning of dust, dirt, loose material, removal of existing flakes by scraping, minor surface repairs with putty where required, application of suitable primer coat and finishing with required number of coats of Deco paint applied through mechanical spray gun to achieve uniform texture and shade, including cost of all materials, labour, scaffolding, surface preparation, curing if required and complete in all respects as directed by the Engineer-in-Charge

Providing and applying high gloss wood polish finish on wooden surfaces such as doors, windows, cupboards, paneling etc., including complete removal of existing polish / paint by mechanical sanding using emery paper / orbital sander, surface preparation, filling of dents and open grains with approved wood filler, smooth rubbing and leveling, followed by application of one coat of wood sealer, necessary staining to achieve uniform shade, and applying minimum three coats of melamine / PU / synthetic clear wood polish to achieve approved high gloss finish, with intermediate sanding between coats, including final buffing, touch-ups and finishing, complete in all respects including cost of all materials, labour, tools & tackles as per direction of Engineer-in-Charge.

Providing and fixing in position a complete wooden staircase of approved design and dimensions, comprising structural framework made out of seasoned imported hardwood sections for stringers, riser supports and load bearing members, and using approved quality solid wooden planks for treads and risers of required thickness, including necessary framing, supports, cleats, nosing, and edge finishing, duly joined with screws, dowels and adhesive, complete with proper alignment, leveling and anchoring to floor and wall structure, including sanding, smooth finishing, application of wood preservative treatment and two or more coats of melamine / PU polish of approved shade, and including cost of all fittings, fasteners, fixtures, labour, tools and incidental works, complete in all respects as per approved design and direction of Engineer-in-Charge.

Providing & laying 18mm minimum thick pre-polished (best quality ) Granite stone slabs (non water absoring) in counters, vanities etc on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand)/12mm thick backing of cement mortar 1:3 (1 cement : 3 coarse sand) and joined with white cement slurry mixed with pigment or with standard tile made compound to match the shade of the slab. Including rounding, rubbing, clamping, curing, moulding, granite polish & making grooves as required complete (Note: The stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc upto site of work

Providing and fixing Ist quality ceramic Glazed Digital Wall Tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 450 x 300 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing and fixing Ist quality ceramic Antiskid Floor Tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 300 x 300 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing and fixing plained eaves boarding of (300 x 40mm ) N/S with necessary grooves and chamfer as per detailed drawing.(ornamental) (Second Class Kail Wood) incl cost of nails.

P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and putup in position in budloo wood (Ceiling Joists). including cost of necessary adhesive & cost of nails etc. with necessary cornice of required size complete job. incl cost of nails / screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete). Soffits

P/F of 3.5mm hick glass panes with all fittings complete job

P/F of wooden Jailer panels/Partitions fixing in Kail wood of approved brand pattern and including complete job. Incl polishimng

Providing and laying approved quality Iranian carpet of required shade, pattern and thickness in approved locations, including surface preparation, cutting to required size and shape, proper stretching, alignment and fixing over underlay using approved adhesive / gripper system, including necessary trimming at edges, finishing along walls, columns and fixtures, and ensuring wrinkle-free and level surface, complete in all respects including cost of carpet, underlay (if required), labour, tools & tackles and all incidental works as per direction of Engineer-in-Charge

Providing/Fixing of door window stard wire fittings

A) T.Bolts

B) Handles

C) L-drops (Link)

Egagnent of Carpenters for Dismantling of Windows Old Damged Panelling and StairCase

Egagnent of Labours for Dismantling of Windows Old Damged Panelling and StairCase

Sanitary fixture

Providing and fixing white glazed vitreous (European style) P trap water closet with solid white plastic seat and lid, C.P.brass hinges and rubber buffers with 3/6 dual flush concealed flush set including reqd. fitting, CP actuator, CI chair etc. complete One piece Make Jaquar, hindware

Providing and fixing white glazed vitreous china wash basin (Flat back counter mounted/ oval or flat back) with 32mm C.P. brass waste of standard pattern, 32mm dia C.P. brass bottle trap and union, 32mm dia C.P. pipe to wall and C.P. wall flange, CP brass pillar cock, CP brass angle valve with braided connection pipe complete with fixing Brackets painted white, required C.P. brass screws, nuts, bolts, consumable complete, cutting and making good the walls wherever required. Make Jaquar, hindware

Half threaded waste coupling:

Bottle trap:

Pillar cock

Angle Valve

15mm dia braided connection pipe.

Providing and fixing Salem Stainless Steel A ISI 304(18/8) Kitchen Sink As per IS 13983 with CI Brackets ans stainless steel plug including painting of fttings and brackets, including cutting(GRANITE) and good the walls whereever required(900x1500) Home made

Providing and fixing 20mm dia C.P. brass quarter turn angle valves with C.P. copper connecting pipe, union nut and C.P. brass wall flanges. Make Jaquar, hindware

Providing and fixing 15mm dia C.P. brass bib cocks with wall flange.

Two way qauter turn bib cock Make Jaquar, hindware

Providing and fixing of liquid soap dispenser with brackets fixed to wooden cleats with C.P. brass screws

Providing and fixing of CP brass Health faucet with 8mm dia 1 mtr. Long PVC tube and wall hook fixed to wall with rawl plugs and CP brass screws complete.Make Jaquar, hindware

Providing in position storage type Hot Water electrical horizontal heaters with copper container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts) Capacity - 50 Litre Jaquar , Hindware , Racold

Providing, supplying, installation, testing and commissioning of Hot & Cold RO Water Purifier (Aquaguard or equivalent approved make) having multi-stage purification system including RO, UV, UF, MTDS / taste controller with inbuilt hot and ambient water dispensing facility,8-10 litre storage capacity, stainless steel hot water tank, child safety lock, auto shut-off and energy saving features, complete with wall / counter mounting arrangement, inlet and outlet connections, food grade tubing, pressure reducing valve, isolation valve, non-return valve, electrical connections, drainage arrangement, necessary civil and plumbing connections from nearest water supply line, connection to drain and power point, fixing with brackets, flushing, testing and commissioning, including all accessories required for proper functioning, complete in all respects as directed by the Engineer-in-Charge. Aquaguard , livpure make

Providing, supplying, installation, testing and commissioning of terrace mounted water booster pump set for boosting water from overhead tank to distribution system, comprising suitable capacity centrifugal / pressure booster pump with motor, pump control panel, pressure switch, pressure tank (if required), non-return valve, isolation valves, suction and delivery piping connections, vibration pads, foundation bolts, electrical connections from nearest point, necessary fittings, testing, trial run and commissioning, complete in all respects including fixing on terrace near tank and making operational as directed by the Engineer-in-Charge.

B. Soil, Waste, Vent & Rain Water Pipes

Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B.Sink, floor drains etc.Make: Pipe:VECTUS/Kissan/AKG

40 mm outer dia

63 mm outer dia

Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports.

110 mm outer dia

150mm outer dia

Cutting holes in RCC beam/Slab by diamond cutting technique.(Nothing extra payable for electrical and water supply required for the cutting operations)

102mm dia Hole in 125mm thick slab

152mm dia Hole in 125mm thick slab

Providing and fixing push fit floor clean plug of Upvc pipe.

For 110 OD Pipe

WATER SUPPLY ( CONTRACTOR SHOULD MAKE NIPPLES FROM SAME CLASS OF PIPE , READYMADE NIPPLES WILL NOT BE ALLOWED)

Providing and fixing 3 layer PP-R(Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge.(Make:Vectus,PRINCE)

PN-16 Pipe, 20mm OD

PN-16 Pipe, 25mm OD

PN-16 Pipe, 32mm OD

PN-16 Pipe, 40mm OD

PN-16 Pipe, 50mm OD

Exacavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms , depth upto 1.5 m including getting out the exacavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed within a lead of 50mtr. All kinds of soil Pipes, cables etc., exceeding 80 mm dia, but not exceeding 300 mm dia

Providing and constructing brick masonry rectangular type manholes with 100 class designation bricks in cement mortar 1:5 (1 cement : 5 coarse sand) inside and outside 12mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand)with a floating coat of neat cement on inside surfaces, 15 cm thick PCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) for fixing manhole frame; foundation concrete 1:4:8 mix (1cement : 4 coarse sand : 8 graded stone aggregate of 40 mm nominal size) including making channels and benching in cement concrete 1:2:4 mix (1 cement : s neatly finished complete as per standard design.(Nothing shall be payable for excavation, refilling and disposing off surplus earth as required by Engineer-in-charge)

450x450x450mm manholes with FRP manhole cover and frame (heavy-duty) perforated/unperforated 450x450 mm size conforming to the latest relevant IS specifications, of the brand as approved.

600x600x600mm manholes with FRP manhole cover and frame (heavy-duty) perforated/unperforated 600x600 mm size conforming to the latest relevant IS specifications, of the brand as approved.

Making soak pit 2.5m diameter3.5m deep Dry tone massonary incl RCC Sab 1 : 1.5 : 3 complete job

Providing and fixing in position polyethylene septic tank type-B (Comfort or equivalent ) having capacity for 20 users, 47"x51"x119" inches in size, including excavation of put as per the size, providing and laying of 150mm thick bed concrete in 1:4:8 mix (1: cement:4 course Sand :8 graded stone agg 20mm nominal size) filling the septic tank with fresh water, connecting the inlet and outlet with the septic tank and filling the dry course of sand and bajre around the septic tank complete Job including carriage of all materials involved

P/F of Centrifugal Water Pump 1HP ( HAVELLS , CROMPTON OR EQUIVALLENT)