CERTAIN REPAIRS/REPLACEMENT TO DOORS, WINDOWS, VENTILATORS, PERIODICAL SERVICES AND REPAIRS TO COMPOUND WALL, FOOTPATH, HARD STANDING, INTERLOCKING AND OTHER MISC WORKS AT AF STN DADRI UNDER GE (AF) FARIDABAD

Amount

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed.

M&L for rendering 12 mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, mixed with water proofing compound @ 3 % by weight of cement, finished even and smooth without using extra cement, complete all as specified and directed. Note : WPC shall be measured & paid separately.

M&L for rendering 5 mm thick in cement mortar (1:3) on ceiling surface, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty, complete all as specified and directed.

M&L for brushing with neat cement slurry with 3.0 kg of cement per sqm, complete all as specified and directed

M&L for rendering 15mm thick ready mix plaster on brick/concrete surface of external walls, finished fair, even & smooth, complete all as specified and directed. Make : Ultratech, Readyplast, Birla Acrocem & Trimurti. Note :- Contractor is required to deposit readymix bags for 100% CA quantity to Engr-in-Charge within 30 days of issue to WO-1.

Taking down Chowkhats with shutters without taking off shutter from the frame of any description not exceeding 1.50 Sq. m each and making good the disturbed Surface in cement mortar (1:4) and finished with similar specification as exists, complete all as specified and as directed.

Taking down Chowkhats with shutters without taking off shutter from the frame of any description exceeding 1.50 Sqm but not exceeding 4.00 Sqm each, and making good the disturbed Surface in cement mortar (1:4) and finished with similar specification as exists, complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, from chowkhat, complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F for factory made, 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commertial type on both sides, fitted to chowkhats of 2nd class hard wood (hollock), complete all as specified and directed.

S&F for 35 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified and directed by the Engineer in Charge.

M&L for Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steek sheeting or other coveriong, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165, complete all as specified and directed by Engineer-in-Charge

M&L for factory Made, 30 mm thick, 100% Solid WPC (Wood polymer Composite) Laminated Flush Door Shutter (Decorative) of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Exfruded (Inner) with having minimum density not less than 650 klcbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000N (Face) & lt00N (Edge), Minimum Compissive of 50Nlmm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum I4 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges required size with necessary full body threaded star headed counter sunk SS Screws, complete all as specified and directed. Note:- Material test certificate and authentication shall be compulsory provided by the manufucturing company.

M&L for factory made 100% Solid WPC wood Polymer Composite) door frame 100 x 65 mm Single Rebated made from wood Polymer Composite (Single Extruded Process) material comparrstng of, virgin PVC polymer of K 57-60 Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/cbm & manufactured by an ISO 900 2015 Certified Company, having a good screw holding capacity (Screw Withdrawal strength of Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite/borer proof water/Moisture Proof & Fire retardant & fixed in position with SS Dash fasteners/Holdfast dia and length, all as per specifications & drawings, complete all as specified and directed. Note:- Material test certificate and authentication shall be compulsory provided by the manufucturing company.

S&F for ECO 2000 series (Elixir/NCL SECCOLOR) Roll framed galvanised pre painted steel section windows/ventilators including provision of grills, 5 mm thick glass and SS wiremesh specification and drawing as per CE (AF) WAC, Palam, Sheet No -1/2 and 2/2 of drawing No - CEAF/STD -191/2014 etc., complete all as specified and directed by Engineer-in-Charge. (a) Fixing details : Frame and shutter frame sections should be cut to length and mittred joined with poly propylene corner brackets, mullion section should be joined with frame/mullion using nylon mullion cap, ethyl propyllene diamene monomer (EPDM) gasket should be used all around glass in shutter and fixed glass. Rubber gasket should be used around the fly mesh to fix mesh in mesh shutter. (b) Accessories : Each Glazed shutter should be provided with MS powder coated friction hinges, high grade aluminium powder coateed handle -1 for each shutter (c) Glass shutters having fixed glass shall be 5 mm thick orion blue (ET725) GLASS, having U value of 3.85 W/sqm K, light transmission factor of 18% and solar radiation factor of 0.23 . (d) Windows should be provided with grill made of 10mm Square MS Bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. (e) Window frame should be fixed to brick/concrete masonry by using nylons self expanding caps and driving MS electroplated 80 mm long screws into the caps through frames. (f) Mesh shutter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per Sqr.inch.

S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whereever required including the cost of EPDM rubber/ neoprene gasket required( fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS :1285, fixing with dash fasteners ofr equired dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snapbeading for glazing/ paneling, C.P. brass/ stainless steel screws , complete all as specified and as directed.

S&F for powder coated Aluminium (minimum thickness of powder coating 50 micron) Window and Ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings such as pegstays 150 mm long(1 nos) hinges type B-21 100 mm long (2 nos) suitable handle (1 nos), complete all as specified and as directed.

S & F 150 mm Aluminium handles, cast type, anodised of extruded section complete all as specified and directed.

S&F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F for aluminum alloy anodized, door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ), complete all as specified and directed.

S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling our glazing pins / spring clips providing and fixing new one, complete all as specified and directed.

S&F for sheet glass 5.50 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares exceeding 0.5 Sq. m in each pane, complete all as specified and directed.

S&F for figured sheet glass 5.00 mm thick, ordinary quality and glazing with oil putty (in metal frames etc) in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed.

Dismantling structural steel work in including doors, gates ,angles but excluding framed truss etc., complete all as specified and directed.

S&F fancy type stainless steel, 25 mm dia, curtain rod with all fittings including making the disturbed good as per existing specification,as in repair with fancy type brackets and knobs for curtain rods, to fix on wall all fittings as specified and directed. Note : Item includes the cost of fancy type brackets and knobs.

S&F in repair aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000 mm width and of weight between 61 to 80 kgs and including taking down old U/S door closer, complete all as specified and directed.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty, including taking down old floor spring hydraulically, complete all as specified and as directed by Engineer-in-Charge.

Dismantling boarding, any description fixed in any position with nails complete all as specified and directed.

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, both/all sides covered with 4 to 5 mm thick teak wood beading, fixed as in cupboard, arrangement to up down on required size, complete all as specified and directed.

Supply only integral water proofing compound conforming to IS-2645-1975, complete all as specified and directed..

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan not exc 6 m mean radius built in cement mortar (1:6), complete all as specified and directed.

S&F in repair 25-35 mm wide, 2-3 mm thick rubber beading of length varies from 0.8 to 1.2 m approx for aluminium /wooden door seal fixed to door shutter with nails/screws,etc and also easing of wooden door for easy opening and closing, complete all as specified and directed.

S&F in repair floor door stopper of aluminum alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140 mm, complete all as specified and directed.

Easing of aluminium windows/door shutters for closing /opening, including tightening of hinges, adjustment of floor door closer, sliding bolts with new screws etc., adjustment of handles, other miscellaneous adjustments, complete all as specified and directed.

M&L for greassing all moving parts of rolling shutters gear operated rolling shutters exc 8 sqm but not exc 16 sqm of clear opening incl hood cover refixing the same and incl replacement of gear box assembly incl replacement of mild steel spring, ball bearing etc, complete all as specified and directed.

S&F in repair 150 mm Aluminium handles, cast type, anodised of extruded section complete all as specified and directed.

S&F in repair 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F in repair 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F in repair, Aluminum alloy, anodized, door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16 mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked), complete all as specified and directed.

NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- The following precautionary measures shall be ensured by the contractor before and during execution of the work : (i) All the painting works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company and their authorised applicator alongwith performance guarentee otherwise recovary of Rs. @ 2000 per week will be made from contractor's dues from the date of commencement of work .Entire work shall be executed with the approved firm. All the material of smart periodical is to be procured only from approved firm and as mentioned against each item and application of materials to wall / ceiling surfaces to be done through smart automatic machines only. (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. (v) Recovery @ cost of material shall be done from contractor if any material found lying on site after completion of work as per manufacturer's instruction and quality satisfaction of Engineer-In-Charge. (vi) The work shall be executed upto 15mtr height and cost of suitable scaffolding shall be deemed to be included in quoted rates by the tenderer. (vii) Smart periodical work to be executed in sequential stages and all the stages to be got approved from GE / Engineer-In-Charge. Stage passing register duly signed to be kept in record. (viii ) The work will be carried out in following steps as appended below :-

M&L for complete removal of old existing treatment of walls (External/internal) finishes using mechanical dry wall sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 320 Grit or above to completely remove old existing treatment for wall and ceiling surface and ready to take new surface finishes complete as specified and as directed.

M&L for applying waterproof cement based putty @ 0.5 Kg (undiluted) per sq mtr. of average thickness 1.5mm in two coats on prepared wall (External/internal) surfaces in following steps:- Step-1) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent. Step 2) Mix the putty powder @ 0.5 kg/sqm by adding 35 to 40% water by volume or as per approved manufacturer's instructions and mix it with electric putty mixer with the mixing capacity of min 2.5 kg putty per minute upto 5 to 10 minutes. Step 3) Apply the first coat of the prepared mix with the help of fully automatic airless sprayer machine i.e. TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with bottom to top configuration. Step 4) Allow 6-8 hrs to dry putty surface. Step-5) Apply the second coat of the prepared mix with the help of fully automatic airless sprayer machine i.e. TruCare Graco Ultramax II 490 PC Pro or equivalent approved by GE for putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with horizontal configuration. Step-6) Allow 6-8 hrs to dry putty surface then prepare the surface by electronic wall sander machine to apply subsequent coats of primer, complete all as specified and as directed. Note : Primer shall be measured and paid saperately under relevant item. Make : Berger Homeshield waterproof putty, Asian Truecare acrylic wall putty, Nerolac Perma waterproof putty, Dulux aquatech waterproof putty.

M&L for applying one coat of acrylic water based interior grade primer @ 0.7 ltr (undiluted)/10 Sqm diluted with water in 1:1 ratio (Minimum) or as per approved manufacturer's instructions to be applied with fully automatic airless sprayer machine i.e. TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External) surfaces as per iabove item, Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for applying with fully automatic airless sprayer machine i.e TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.04 ltr per minute having a pressure of 3300 PSI of paint application with a flow speed of 2 ltr per minute having pressure of 3300 PSI two coats of high-sheen, anti- fungle, anti bacterial, low-VOC & highly washable luxury emulsion paint with @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per manufacturer's instruction taflon surface protector of shade as approved complete all as specified and as directed .

M&L for applying one coat of acrylic water based Exterior grade primer @ 0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) as per approved manufacturer's instructions to be applied with fully automatic airless sprayer machine i.e. TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces as per above item, Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint @ 0.2 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturer's instruction over prepared and primed surface of external wall with fully automatic airless spray machine ie. TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI as per above item, Allow 6-8 hrs to dry the surface in subsequent coats of paint, complete all as specified and as directed.

M&L for preparing old decorated wall surfaces, filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on walls, complete all as specified and directed.

All as per item No 57 above but on ceilings

M&L for prepration of old surfaces of walls, filling of holes with plaster of paris and applying one coat of oil bound distemper, complete all as specified and directed.

M&L for prepration of old surfaces of walls and applying one coat of cement base paint on surfaces of wall including washing rubbing down stopping, complete all as specified and directed.

M&L for preparing old decorated wall surfaces, filling of holes and cracks with lime putty or plaster of paris and applying one coat of weather coat/ exterior emulsion paint of electric blue or AF blue colour or white or equivalent colour as approved by GE, using ultra clean paint over the old decorated wall surfaces, edges of slab, roof/chajja projection and column etc, complete all as specified and directed.

M & L for applying one coat of 3mm thick wall care putty on wall surfaces, complete all as specified and directed.

M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth and applying one coat of synthetic enamal paint, complete all as specified and directed.

All as per item No 63 above but on wooden surfaces.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works, complete all as specified and directed.

M&L for reinforced precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar (1:6), complete all as specified and directed. Note : Reinforcement shall be measured and paid for separately under respective item of BOQ

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for Factory Made 24mm thick 100% Solid WPC (Wood polymer Composite) JALI of required size comprising of virgin PVC resin of K Value 58-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made frorn Extrusion procdss WPC foam sheet Single Extruded (Inner) with having minimum densiff not less than 650 kglcbm, manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000N (Face) & 1100N (Edge), Minimum Compissive of 50Nlmm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC Jalli to be fixed as specified and as per direction of Engineer -in-Charge. Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company for external walls.

M&L for writing letters, figures & digits (Block. Roman, Italic or Indian) building Nos, 30 centimeter height with black background and white letters as approved by Engineer-In- Charge complete all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc. complete all as specified and directed.

Demolition of cement concrete ground floor and paving n exc 15 cm thick (below or above ground level), complete all as specified and directed.

Demolition of tiles/ Interlocking tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc., complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in sub base, complete all as specified and directed.

M&L for coloured chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment, complete all as specified and directed.

M&L for screed bed or bedding layer 20 mm thick in cement mortar (1:6) for laying floor finishes, complete all as specified and directed.

M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size with grey cement and coloured pigment confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, complete all as specified and directed.

M & L for coloured Machine pressed precast concrete interlocking paver block any shape and size with grey cement and coloured pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed.

All as per item No 77 above but except interlocking paver block. Note:- Old serviceable interlocking tile retieved from item No 72 shall be reused.

M&L for pre-cast PCC 1:2:4, Type B-0, using 12.50 mm graded crushed stone aggregate as in kerb stone set in cement mortar (1:6), including form work, complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidating, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in side of path/ benching / coved fillets etc rounded or chamfered on edges, complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor topping of hard standing finished even and smooth without using extra cement (PCC shall be laid in alternate bays in panels of size, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in plinth protection, finished even and fair, complete all as specified and directed.

S&F for mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete, conforming to Fe-290 Gde E-165, complete all as specified and directed.

S & F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc, complete all as specified and directed Note : Each line of wire shall be measured.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete and filling of footing for fencing post, complete all as specified and directed.

M&L Mild steel round bars 10 mm dia, and over cut to length, bent to shape required, including with screwewd ends, nuts, washers and mild steel plates conforming to Fe - 290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n. exc 10cm long and dia 5 to 10mm, complete all as specified & directed.

Supply only Chain link MS Galvanized fencing, any size or type complete all as specified and directed

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining blots, etc. including provision of binding wire. complete all as specified and directed.

Dismantling of chain link fencing, wire mesh & angle, any type in fencing, complete all as specified and directed.

GARG CONSTRUCTION CO (BID ID -3302969)

SAGAR ENTERPRISES (BID ID -3302871)

MAA BHAWANI CONSTRUCTION (BID ID -3300716)

NAVEEN KUMAR TYAGI (BID ID -3302342)

36SHRI RADHEY ASSOCIATES (BID ID -3302664)

M/S Yamin (BID ID -3300361)