15th SFC

Amount

Earth work excavating and depositing on bank with initial lead of 10 metre and initial lift of 2 metre in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard specification

Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification

Randam.Rubble. Masonry in Cm 1:5 mix using rough stone Bond stone including cost & conveyance and all labour charges etc., complete

Brick work in cement mortar 1:5 mix using basement quality of country bricks (23m x 11cm x 7cm) for foundation including cost and conveyance of all materials to site including curing as perstandardspecification

Supply and fabrication of steel including cost and conveyance of al materials to site and all labour charges etc., to complete as per std., specification.

Reinforeced cement concrete 1:11/2::3 mix using 20mm ISS HBG metal including cost and conveyance of al materials to site and all labour charges etc., to complete as per std., specification.

Plastering with cement mortal 1:5 mix using 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

Plastering with cement mortal 1:5 mix using 20 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Refilling with excavated earth other than sand complying with standard specification.

Supply and delivery PVC 6kg/cm2 pipe including all cost and conveyance of all materials etc., complete A) 63 mm dia PVC 6kg/cm2 pipe

Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment.jointing with PVC couplers with cement paste. A) 63 mm dia PVC 6kg/cm2 pipe

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., A) 5000 lit HDPE tank

2000 lit HDPE tank

Supply and delivery of Single phase of 20 LPM 150 mtr Head 2.00 HP Submersible pumpset of Motor ISI/ISO as per ISI Specifications including all cost and conveyance to site etc., Complete

Supply and delivery of SINGLE PHASE PANEL BOARD 2.00 HP WITH TWO LEVEL GUARD AND AUTO START as per ISI Specifications including all cost and conveyance to site etc., Complete

Supply and delivery of Three phase of 50 LPM 225 mtr Head 7.50 HP Submersible pumpset of Motor ISI/ISO as per ISI Specifications including all cost and conveyance to site etc., Complete

Supply and delivery of THREE PHASE PANEL BOARD 7.50 HP WITH TWO LEVEL GUARD AND AUTO START as per ISI Specifications including all cost and conveyance to site etc., Complete

Supply and run of 2.50 sqmm (22/0.3) pvc insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for Service connection mains(SD. NO 69)

Supply and run of 4.00 sqmm (22/0.3) pvc insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for Service connection mains(SD. NO 69)

Supply of UPVC column pipe including cost and conveyance of all other labour and material charges to site etc., complete complying with standard specifications. A) 32MM UPVC

50MM UPVC

Supply and delivery of MS kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS Sheet and kiosk door made up of MS plates of size 25mm x 3mm including cutting, welding, grinding, locking arrange including all charges to site etc., complete complying with standard specifications.

Towards labour charges for the erection of submersible pumpset in borewell including fixing and jointing submersible cable withproper clamps upto the starter to required dpth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (incating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pimpset and trial run for 10 days. A) 2HP MOTAR

7.50HP MOTAR

SURESH & CO