SPECIAL REPAIRS TO BUILDING NO 0501EME EMC TECHNOLOGY CENTRE AT RCI HYDERABAD

Amount

Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level)

Demolition of PCC hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for 25mm thick, PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in floors/paving finished rough to receive cement tiles complete all as specified and directed.

M & L for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc finished even and smooth without using extra cement including filling the joints with sealing compound grade 'A' all as specified and directed.

M&L for Coloured Non Skid Joint less ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed 15 mm thick in CM 1:4complete all as specified and directed complete

M&L Glazed ceramic tiles in verticle surface of size 450 x 300 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with adjacent tiles over 10mm th backing coat in CM (1:4) complete all as specified and directed complete

M&L for Coloured Non Skid Joint less ceramic tiles 7 to 8 mm thick (Square/rectangular) coloured tiles area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match and including screed bed 15 mm thick in Cm 1:6 complete all as specified and directed complete

M & L for Vitrified Tiles, Double Charged, light shade, First Quality, area of each tile not exceeding 0.36 Sqm, 9 to 10 mm thick as in Floors, set and jointed in cement slurry, finished with flush pointing in white cement or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Vitrified Tiles, Double Charged, light shade and matching with adjacent floor tile, First Quality, area of each tile not exceeding 0.36 Sqm, 9 to 10 mm thick as in skirting , set and jointed in neat cement slurry and pointed in epoxy grout to match including platring with 10 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M&L Machine cut kota stone slab, 22-25mm thick, using single piece kota stone slab, using single piece Kota stone slab of size suitable to fit in treads, and 1000mm x 1000mm (minimum) in landings etc., set and jointed in neat grey cement slurry mixed with colouring pigment to match with the shade of slab, including rubbing and mirror polishing, laid over and including provision of screed bed 15mm thick in CM 1:6, complete all as specified and directed.

M&LMachine cut kota stone slab 20-25mm thick, using single piece kota stone slab (pre-mirror polished) in risers of staircase, skirting and dado over pillars etc. to match in size and pattern, set and jointed in neat grey cement slurry mixed with colouring pigment to match with the shade of slab, laid over and including provision of backing coat of CM 1:4, 10mm thick, including rubbing and polishing, complete all as specified and directed.

S & F in repairs PVC valve less, syphonic action type, flushing cistern, 10 Litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC outlet pipe all as directed.

S & F in repairs Vitreous china urinal half stall type with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement; fixing grating and Union for discharge pipe complete all as specified and directed.

S&F of PTMT soap rack / Niche/Shelf of size 150mm x 100mm, fixed with and including chromium plated brass screws and wooden/plastic cleats.

S & F in repairs 15mm dia Pillar taps, self closing, cast copper alloy, with long neck, chromium plated fancy type with aerator, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs stainless steel tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.

S & F Urinal spreader of brass chromium plated for fitting with 15mm dia pipe in repairs complete all as specified and as directed.

S & F in repairs Bib tap with long body, fancy type, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed

S&F PVC connection 15mm dia 600mm long with PTMT nuts at both ends fixed in repairs

S&F Angle valve,15mm dia bore cast copper alloy,fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed in repair, complete all as specified and directed.

S&F Bib taps (two in one) fancy type , chromium plated, cast copper alloy with crutch capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs.

Taking down GI tubing 15 mm bore with all fittings and connections all as specified and as directed

Taking down GI tubing 20 mm bore with all fittings and connections all as specified and as directed

Taking down GI tubing 25 mm bore with all fittings and connections all as specified and as directed

S & F GI water tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, and connections of any description complete all as specified and as directed

S & F GI water tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, connections of any description complete all as specified and as directed

S & F GI water tubing of 25 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, connections of any description complete all as specified and as directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

Vitreous china wash hand basin, flat back, size 580mm x 450mm white, excluding taps, waste pipe, but including brackets, including cutting for and pinning in ends of brackets or erecting stand and waste coupling of PTMT, fixed in repairs, complete all as specified and directed.

S & F in repairs Wash down water closet (Pedestal pattern), Vitreous China white(ETWC), plastic water closet seat (ETWC) of same colour closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair Vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm, White with integral foot rests and 'P' or 'S' trap 100 mm dia including provision of cement concrete bedding complete all as specified and as directed.

S&F in repairs, CP brass jet/hand shower (health faucet) with 1m long flexible tube and hang 15mm dia fixed to stop cock/Blib cock complete all as specified.

S&F in repairs UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors or walls, 75mm bore, complete all as specified and directed.

S&F UPVC (SWR) bends/Shoes of any radius, 75 mm bore, with access door, complete all as specified and directed.

S&F in repairs UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors or walls, 110mm bore, complete all as specified and directed.

S&F "UPVC (SWR) bends any radius, 110mm bore, with access door, complete all as specified and directed.

S&F in repairs Toilet paper holder coloured fixed to walls with chromium plated (CP) brass screws complete all as directed.

S & F in repairs Gun Metal Globe or Gate Valve, 20 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed.

S&F in repairs cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) diameter of out let pipe 100 mm complete all as directed.

Dismantling of water tanks 500 litres to 1000 litres capacity complete all as specified and directed

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litres capacity, triple layered, hoisted and fixed in position complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, triple layered, hoisted and fixed in position complete all as specified and directed.

S & F Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe [Minimum Weight 20mm - 210 Grams] etc complete all as specified and as directed

Taking down chowkats or frames without taking off shutters from the frames area n.exc 1.5 Sqm each.

Taking down shutters from the frames of any description exc 1 sq.m and n. exc 2 Sqm each.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, with and including making good to jambs with CM 1:4 and finished the surface to match with the existing, complete all as specified and directed.

M & L for 30mm thick Flush door solid core construction with veneer faced, black board core and ply wood face panels commercial type on both sides and both the faces are covered with decorative face veneer with lipping/frame to match . Bonding shall be with formaldehyde glue to ensure stronger bonding and longer life of door complete all as specified and as directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm size, complete all as specified and directed.

S&F"Aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed. "

S & F Aluminium alloy anodised 300mm Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 100mm long complete all as specified and as directed.

S&F for Steel rolling shutters of thicknes of laths in 1.25 mm, with out ball bearing, as specified incluidng top cover and one shop coat of primer; errected in position as indicated, complete; gear operated type with chain wheel and hand chain type including taking down the existing rolling shutter all as specified and diretced.

S&F for safety lever locks mild steel with 4 levers for rolling shutters

S&F for ball bearing for rolling shutters

Hacking out old broken glass ( any thickness, size , quality or description ) from wooden frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete

M & L for 4.00 mm thick sheet glass ordinary quality in square not exceeding 0.50 Sq.m each pane glazing with oil putty complete all as specified and as directed.

M & L for 4.00 mm thick sheet glass ordinary quality in square exceeding 0.50 Sq.m each pane glazing with oil putty complete all as specified and as directed.

S&F sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane in 4mm thick , but frosted one side complete all as specified and as directed..

S&F solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturer.

S&F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F in repairs brass mortice lock, vertical type, size 100mm, 4 levers fixed in repairs

Demolition of wall and ceiling boards etc of any thickness including cover fillets

S&F in repair anodised aluminium snap grid frame work for false ceiling and size of grid 605x605 mm and including hanging 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete all as specified.

M&L for Gypsum board false ceiling 12 mm thick in ceiling fixed with screws as per manufactures specifications made by India gypsum Ltd including finishing with one coat of putty and two coats of oil bound distemper over a coat primer all as directed to match existing ceiling.

S&F cover fillets of tempered hard board, 40mm wide and fixing with screws

S&F bonded mineral wool blanket slab made from glass density 24 Kg/cum and fixed as per manufactures instructions 40mm thick in two layers (each layers 20mm thick) fixed in repairs complete all as specified and directed.

S&F plywood, grade BWR 12mm thick type BB fixed with screws to timber frame work fixed in repairs complete all as specified and directed.

Demolition of Brick/stone masonry work of build in cement mortar including all quions, arches, pillars etc,

M & L for Brick work with Sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:4 complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement including complete all as specified and as directed.

M & L for preparation of old plastered Wall surfaces and applying two or more coats of Cement based Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying Two coats of 100% Acrylic premium Weather Proof Exterior Emulsion Paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance of required shade over and including a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint complete all as specified and as directed.

M&L complete removal of existing treatment on wall surfaces (Internal) and applying two or more coats of Cement based Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces

M&L preparation of old plastered or unplastered surface of walls and applying two coats of Acrylic Distemper Emulsion over a coat of alkali resistant primer andtint shall be as approved by the GE complete all as specified and directed

M&L preparation of old plastered or unplastered surface of ceiling and applying one coat of Acrylic Washable Distemper complete all as specified and directed

M & L for preparation of newly plastered Wall surfaces and applying two or more coats of Cement based Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over one coat of alkali resistant primer on Wall surfaces complete all as specified and as directed.

M & L for preparation of newly plastered ceiling surfaces and Applying two coats of acrylic emulsion distemper over a coat of primer , complete all as specified and directed.

M&L preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint .

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and directed

M&L preparation of old steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint .

M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M & L for providing Precast PCC 1:2:4, Type B-1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc], Chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed.

S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 6mm to 8mm dia size, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

Taking down existing roof treatment of any description including cement plaster of any description on concrete surface of roof slab including cleaning by picking sweeping and washing down with water to remove dust complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:4 (after applying cement slurry @ 1.2 Kg/Sqm over the existing roof slab) including mixing of water proofing compound @3% by weight of cement and surface finished even and smoothcomplete all as specified and directed. Note: Water proofing compound will be measured and paid separately as " Supply only"

M&L for APP bases polymeric membrane minimum weighing 3.5 KG/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 160 gms/Sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @0.3 Ltr/Sqm by forced all as specified and as directed. Four course roof treatment consist of as under :- (i) Applying one coat of bituminious primer conforming to IS - 3384 @0.3 Ltr per sqm (ii) Laying of APP based membrane as specified thickness and weight (iii) Applying one coat of bitumen grade 85/25 @1.2 kg/Sqm (iv) Applying two coat of aluminium paint @100ml/sqm

M&L for APP bases polymeric membrane minimum weighing 3.5 KG/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 160 gms/Sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @0.3 Ltr/Sqm by forced all as specified and as directed. Four course roof treatment consist of as under :- (i) Applying one coat of bituminious primer conforming to IS - 3384 @0.3 Ltr per sqm (ii) Laying of APP based membrane as specified thickness and weight (iii) Applying one coat of bitumen grade 85/25 @1.2 kg/Sqm (iv) M&L for cement concrete tiles 25cm x 25xm x22mm thick, machine pressed; set, jointed and poin ted in net cement shurry in floors, and cut and polished with grey cement and no pigment and including 15mm screed bed in CM 1:6

Supply only integral water proofing compound

M&L for laying padding concrete (1:2:4) type B1 (using 20mm graded stone aggregate) on roof slab to maintain proper slope complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizantal faces of grooves with cement mortar in CM 1:3 and making good in CM 1:3 after inserting membrance in to the groove all as directed.

S&F Venetian blinds rolling system upward type of approved colour including operation chords, roller, counter nut, connection chain, necessary fittings complete all as directed. Make : AMAR/MAC.

Material and labour for PCC 1:2:4, type B1 using with 20mm graded stone aggregate,100mm thick, as in floor and finished the surface even and fair without using extra cement complete all as specified and directed.

Material and labour for walling of random rubble masonry, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

Material and Labour for walling of random rubble masonry, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) except stone complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces, finished even and smooth complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone agregate as in coping,surface channels and drains including necessary form work all as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc all as directed.

S&F Aluminium powder coated frame, for door, windows, ventilators, partitions, door shutters, window shutters, including necessary joining cleats, glazing clips, ruber neoprene packing, handle 2 Nos in each door, hinges, roller, anodised aluminum snap beading screws etc to receive 5 mm thick sheet glass or 12 mm thick pre-laminated particle board all as specified and directed.

S & F powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to existing window frame with CP brass/ stainless steel screws at 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed. Note : weight of grill shall not be lessthan 2.5Kg/SqM

M & L for 5.50 mm thick tinted glass ordinary quality in square exceeding 0.50 Sq.m each pane glazing with aluminium beads complete all as specified and as directed.

M & L for 5.50 mm thick tinted glass ordinary quality in square not exceeding 0.50 Sq.m each pane glazing with aluminium beads complete all as specified and as directed.

S & F 12mm thick, Prelaminated Particle Board, prelaminated on both side with decorative choice lamination, interior Grade fixed with screws to aluminium frame work complete all as specified and as directed.

S & F Aluminium extruded body section Door Closer Hydraulically Regulated, Designation No. 3 universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.

S&F aluminium door lock 7 lever vertical type brass body 100 mm long with duplicate key complete all as specified and directed.

S&F of standard EPDM rubber beading for fixing of glass partition complete all as specified and directed

Taking down chowkats or frames without taking off shutters from the frames area exc 1.5 Sqm and n. exc 4 Sqm each.

Taking down carefully any type of point wiring and description and removing the un serviceable material out of site including seperating the serviciable fitting/ fixtures of light / socket / switch etc complete all as directed.

Material and Labour for point wiring concealed in wall complete using 1.5 Sqmm PVC insulated FRLS unsheathed , multi stranded copper conductor upto and incl working voltage 1100 volts grade and ISI marked PVC conduit ( Not less than 20 mm dia), bend, tee, junction boxes elbows etc including provision of 1.60mm thick modular metal flush boxes with modular metal frame plate suitable for modular swithes,socket Fan, Exhaust fan and regulators and unsheathed FRLS copper multistranded 1.5 Sqmm copper cable as earth continuity conductor connected to common earth dolly including cutting/making hole and making good surfaces with required materials and match with existing for One Light /Fan point controlled by one way modular switch complete all as specified and directed

All as per item No. 115 here-in-above but for One 3 pin socket outlet, 6 Amps on the same board

All as per Item No.115 here-in-above but for One 3 pin socket outlet, 6 Amps on independent board

All as per item No 115 here in above but with cable 2.5 sqmm for phase and neutral & 2.5 sqmm for earth continuity for 15Amps socket outlet on independent board complete all as directed ( For 15 amps socket) .

All as per item No 115 here in above but with cable 4 sqmm for phase and neutral & 4.0 sqmm for earth continuity all as directed ( For AC point wiring) .

Material and Labour switch modular type 6 amp 240 volts single pole one module complete all as specified and directed.

Material and Labour switch modular type 16 amp 240 volts one module, single pole complete all as specified and directed.

Material and Labour modular socket multipurpose 6 amps 3 pin two module complete all as specified and directed.

Material and Labour for modular type socket multipurpose 6/16 amps 5 pin two module complete all as specified and directed.

Supply and fix Single pole and neutral sheet matel enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp Capacity including taking down of old enclosure complete all as specified and directed.

Supply and fix sheet metal enclosure for pre wired distribution board double door, powder coated triple pole & Neutral 12 way 415 volts with out MCCB, three phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old MCCB/MCB and DB complete all as specified and directed. Note: MCCB/MCB shall be measured and paid separately under respective Item of schedule.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated Single pole & Neutral 12 way , 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old MCCB/MCB and DB complete all as specified and directed. Note: MCCB/MCB shall be measured and paid separatly under respective Item of schedule.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated Single pole & Neutral 8 way , 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old MCCB/MCB and DB complete all as specified and directed. Note: MCCB/MCB shall be measured and paid separatly under respective Item of schedule.

S&F of MCB TPN 240 Volts, breaking capacity 10 KA of rating 63Amps complete all as specified and as directed.

S&F MCCB 100Amp capacity, FP, 415Volt grade, rupturing capacity 16kA, with adjustable thermal and magnetic setting, including making incoming and outgoing connections using copper thimbles / lugs of appropriate size, complete all as specified.

S&F MCCB 200Amp capacity, FP, 415Volt grade, rupturing capacity 36kA, with adjustable thermal and magnetic setting, including making incoming and outgoing connections using copper thimbles / lugs of appropriate size, complete all as specified.

S&F of MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified and as directed.

S&F of MCB SP 240 Volts, 'C' series, breaking capacity 10 KA of rating 6 to 32 Amps complete all as specified and as directed.

M & L for Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts with colour code , FRLS Grade, ISI Marked, drawn through and including PVC conduit accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 2.5 Sq.mm & one run of PVC conduit accessories will be measured as one unit.

M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC non metallic rigid conduit with accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of PVC conduit with accessories will be measured as one RM.

M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC non metallic rigid conduit accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of PVC conduit accessories will be measured as RM.

M & L for Sub main wiring with 3 runs of single core 10 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC non metallic rigid conduit accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 10 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor including taking down existing wiring complete all as specified and as directed. Note: 4 runs of 10 Sq.mm & one run of PVC conduit accessories will be measured as RM.

Supply and fix Ceiling rose, surface, Bakelite with 2 or 3 terminals PVC/polycarbonate, isolated body complete .

Supply and fix LED Recess mounting 600x600MM,34 Watt luminaire suitable to operate on 230 volts single phase AC supply, TDH ≤ 20% CCT 5700K, CRI ≥80 system lumens out put 4200 lm all as specified and directed.

Supply and Fix LED tube light fitting, 2x20w, 230V, regal batten type Double side connection included with 2x20W led tube rod single side connection complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

Supply and Fix LED Flood light fitting 50 Watt 230 volt single phase pressure dia cast housing with IP 65 protection TDH ≤ 33% CCT 6500K, CRI ≥70 system lumens output 5000lm applicable for area lighting including taking down unserviceable light fittings complete all as specified and directed.

Supply and fix LED HighBay luminaire of 150W at any height in hangers/Work shops closed version with TDH ≤ 10% CCT 5700K, CRI ≥80 system lumens output 18750lm Energy saving, environment friendly & aluminium alloy pressure die cast housing with epoxy powder coated LED IP65 luminaire with high power LED as light source complete and with in built surge voltage protection of 10 KV and with cover tampered protective toughened glass including taking down unserviceable light fittings all as specified and as directed. Note: 1. All necessary fixing/ connecting arrangements of nut, bolt, MS rod, to be provided by the contractor with out any extra payment from department . 2. Quoated rate is to be deemed the charges of necessary boom lift. 3 Rate includes taking down of old fittings

Supply and Fix LED Surface Mounting square down light, 15Watt, 230V TDH ≤ 20% CCT 5700K, CRI ≥80 system lumens out put complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed.

Taking down old Exhaust fan upto 400mm sweep and refixing to its existing place including painting and marking MES number of the same all as specified and connections with new flexible copper cable complete all as directed.

Taking down the ceiling fan of any make / sweep and provision of new down rod of length 1.2 mtr (approx) including new canopy, clamp, rubber reel and refixing to its existing place including painting and marking MES number of the same all as specified and connections with new flexible cable complete all as directed.

S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed.

Earthing complete with galavanised steel plate electrode 600x600x6 mm thick buried directly in ground vertically ( earth pit to a depth of not less than 2.25 meter deep below ground level) with the tope edge of earth place at a depth of not less than 1.5 meter below normal ground level connected to galvanised earth lead 4 mm dia by means of bolts, nuts, washers of galvanised iron and provision of earth wire, galvanised iron protection pipe 15 mm bore,medium grade up to and including test point including necessary earth work in any type of solid and PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) earth chamber, watering pipe 20 mm dia galvanised iron light grade with funnel, RCC (1:2:4) type B1 precast cover 40 mm thick with 6 mm dia mild steel bars complete all as shown in electrical plate N. 3 of SSR Part - I connected to earthing test point all as specified or indicated, including testing on completion. Note :- (i) Quoted rate deemed to include the cost of excavation and earth work, PCC pit, funnel and cover etc.

Supply and fixing in repair aluminum strip 25 x 3 mm complete with saddles and fixing screws for roof / down conductor on porcelain/epoxy spacer insulator or fixed in GI Pipe all as specified and as directed. Note :- Rates quoted by the contractor are deemed to be included for cutting , jointing pieces of strip with nut bolt etc.

Taking down and refixing of the serviceable aluminum strip 25 x 3 mm complete with saddles and fixing screws for roof / down conductor on porcelain/epoxy spacer insulator or fixed in GI Pipe all as specified and as directed. Note :- Rates quoted by the contractor are deemed to be included for cutting ,jointing pieces of strip with nut bolt etc.

Supply and fixing in repair epoxy spacer insulator with one GI stud bolt with nut and washer with necessary drilling for bolt hole for holding / fixing roof conductor / down conductor of lightning conductor complete all as specified and as directed

Supply and erect GI light grade pipe of 20 mm dia for fixing air termination rod and earth strip on roof including dismantling of old worn out GI pipe all as specified and as directed .

Supply and fix in repair single pointed air termination aluminium rod 12 mm dia 300 mm long with fixing arrangement including dismantling of old unserviceable/ deshaped conductor and removed from site of work complete all as specified and as directed

Material and Labour in repair 32 x 6 mm GI earth strip earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to pole or any other indicated situation for loop earthing etc. as required complete and all as specified and directed

Supply & Fixing in repairTest Point Terminal Block made of Gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head Screw Complete all as directed

Taking down carefully Indoor Unit of Split Type AC of upto 2.0 TON capacity and refixing of the same after completion of the neccessary civil works including refilling of the gas and making it serviceable all as specified and directed

Supply and fix Triple pole and neutral sheet matel enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amp Capacity including taking down of old enclosure complete all as specified and directed.

Supply and fix Triple pole and neutral sheet matel enclosure with a three pin and earth plug and socket complete with one single pole MCB 63 Amp Capacity including taking down of old enclosure complete all as specified and directed.

Supplying, laying, jointing, testing and commissioning 1100 volts grade, 185 Sqmm 3.5 core LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/road crossing or fixed on walls with suitable size clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including taking down unserviceable cable complete all as specified and directed. Note : Earthwork Excavation, sand cushioning GI pipe and cable protection shall be measured and paid separately.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 mtr depth for laying cable at and getting out in soft/loose soil all as specified and directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick all as specified and directed

Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 mtr above from the starting point all as specified

Supply and spread sand in trenches for cable cushioning including watering and consolidation all as specified Note : For the purpose of payment punned thickness only will be measured.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

M&L for cutting of existing bituminous/PCC road or flooring/plinth protection laying of GI pipe in intersection for passing of LT XLPE cable including excavation in any type of soil returning filling in and making good top 30 cm of the trench by providing PCC 1:2:4 typ-e B1 using 20mm graded stone aggregate to flush with existing road surface complete all as directed.

S&Fin repairs 80mm dia GI pipe light grade fixed to walls/poles or laid in trenches, road crossing etc., for protection of underground cable/earth strip including sealing ends with hessian cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed on walls/poles complete all as specified and directed.

Supply and fix Two loop main control panel Complying with BS EN 54 single loop panel of capacity from 99 detectors and 99 module upto 200 detectors and module micro processor based addressable type fire control panel with zonal indication with battery power pack and testing complete including taking down unserviceable fire control panel all as specified and directed. Note : Test Certificate through OEM is required to submit to Engr-in-Charge, after installation of loop panels with original panel CD & line diagram of complete fire alarm of concerned bldg reprogramming with correct indication of smoke detectors, heat detectors, MCP, fault isolator, response indicators, electric hooter and siren etc.

Suplly and install Auto dialing system (E-dialer) suitable for addressable type fire panel system consisting of storage capacity of 15 to 20 telephone numbers programmable type, including connection to the existing fire alarm panel and connecting to the fire station with demonstration complete including disconnecting of the unserviceable fire panel system all as specified and directed by Engr-in-Charge.

Supply and fix detectors complying with EN 45 addressable type smoke detector photoelectric/ optical with base and self built intelligence as per IS : 11360 including taking down unserviceable smoke detector all as directed.

Supply and fix complying with and type certified to EN - 45 addressable type smoke with heat and smoke combination photoelectric / optical with base with self built intelligence as per IS : 11360 including taking down of old detectors complete all as specified and directed.

Supply and fix addressable manual call point resettable type including taking down unserviceable call point complete all as specified and directed.

Supply and fix analogue short circuit faults isolator suitable for addressable type fire alarm system including taking down unserviceable short circuit fault isolator.

Supply and fixing electric sounder cum strobe suitable for addressable type alarm system including taking down unserviceable fire alarm system all as specified and directed.

Supply and fix respones indicator on wall or with the false ceiling with LED indicator lamp suitable for addressable type including taking down unserviceable response indicator all as specified and directed .

Supply and laying 2 core 1.5Sqmm PVC sheathed flexible copper conductor cable 1100 Volts grade FRLS cable all as directed.

Supply and laying 2 core 1.5Sqmm PVC sheathed flexible copper conductor cable 1100 Volts grade FRLS cable all as directed.

Supply and fixed in repairs, metalic fibre accoustical suspended ceiling system with Mina Tuff (Micro look) edge tiles with silhouette exposed grid. The tiles hold have humidity resistance (RH) of 99%, NRC upto 0.6, light reflectance 88%, Thermal Conductivity K=0.052 - 0.057 w/m, Colour white, fire performance class-I (BS 476 Part 6 & 7) in module size of 600x600x16mm with bio black coating on the face of the tile, impact resistant and suitable for Green building application, with recycled content of 63%. The tile shall be laid on silhouette profile grid system with 15mm white/black colour and with a web height of 38mm and load carrying capacity of minimum 11.68Kgs/Sqm. Silhouette, main runners and cross Tees to have mitred ends & "Birds mouth" notches to provide metred cruciform Junction. Note: Suspended Grid with suspenders as recommended by manufacturer shall be deemed to be inclusive of rate quoted Make: Armstrong, Saint Gobain

SHAH ENTERPRISES

M/S BHASKAR MANIKRAO PAWAR

Universal refrigeration and Engineering Company