Supplying and fixing of 4 Mtr. Decorative Pole along Sapna Park at Kalka Devi Marg Near Taneja Red Light New Delhi).

Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).

Supplying, installation, testing and commissioning of 4 Mtr. height Decorative Mild steel galvanized tubular Pole having different prole with cast alumn. embellishment E3. Pole has a service window and xed base plate at bottom prole. Pole is primer coated and PU painted. having Bottom-114mmX4mm x 1000mm, Top-60X3.2mm x 3000mm & Base Plate 250X250X10mm, pole above the ground level, provided 32 amps heavy duty connector shall be inbuilt into the pole (a) heavy duty 4 way connector and 6 amp single pole MCB with oval/rectangle shape service window with sleeve type window cover etc. as required. The Pole shall be primer & painted with polyurethane paint in approved colour finish completed etc. as required.

Providing and laying in position 1:2:4 reinforced cement foundation of size 250mm x 250mm x 800mm deep i/c excavation of earth, providing , cutting, bending and placing in position, 4 nos. reinforcement of cold twisted bars of 12mm dia-800mm long (NS) - & 5 nos. reinforcement ring of cold twisted bar of 8mm dia - 1200mm (NS) equally distanced in lenth of vertical bar as required with positioning of foundation bolts and providing 40 mm (O.D.) DWC, HDPE Pipe of 0.3 mtrs. length for cable entry & exit etc. Complete as reqd. (For 3 mtr )

Supplying and fixing 4 Nos. 16mm dia X 450mm long GI foundation bolt (EN8 grade) with nuts, washer including 2 Nos. template of 4mm thick size 250mm x 250mm with 4 nos. 16mm dia holes, to match with PCD of Pole base plate as reqd. (For 3 mtr. pole)

Supplying, installation, testing & commissioning of hexagonal IP-65 duly fully weather proof Led Post Top Luminaire having size 625mmX 290mm having pipe dia. 50/60 mm made of aluminum housing duly powder coated/PU painted with PC/PMMA Clear/Frosted diffuser with sturdy six arm. High Lumen LEDs are directly mounted on aluminum heat sinks, with E-27 lamp holder i/c 15-18 Watt LED Bulb, silicon filled , U.V.resistant P.U. / Powder coated paint ,Duly wired upto connector, Antique etc. complete as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and laying of one number PVC insulated and PVC sheated/XLPE aluminium conductor armoured power cable of 1.1 KV grade of following size in existing HDPE pipe etc as reqd.

4 x 10 sqmm

4 x 25 sqmm