Operation and Maintenance of sewer lines in Ward No.04, Ballabgarh.

Amount

Hiring of Jetting cum suction machine mounted on TATA-407 or Equivalent make with Jetting Pump 150LPM (min.) maximum working pressure-150bar, Air handling capacity- 1800m3/hour with minimum vacuum of 80%, minimum tank capacity-3000Ltr. (1500Ltr. Fresh water + 1500Ltr. Sludge).The VAR-3000Ltr combined tank capacity, MCV Truck chassis mounted, combined suction cum jetting unit is capable of de-silting and de-chocking sewer line of dia 200mm to 800mm complete as per analysis attached.

Supply of Bamboos.

Supply of Sutli.

De-silting of sewer line by bucket type machine for 200mm dia to 300 mm dia

De-silting of sewer line by bucket type machine for 450mm(18")

De-silting of sewer line by bucket type machine for 600mm dia(24")

Hiring of Super Sucker machine for De-silting of sewer line/storm water line with mechanical device link super sucker machine /device & there after C.C.Tv survey of same with pen & tilt rotated camera & recording & giving 3 set of CD od cassette as directed by Engineer-in-charge i.e. taking out debris silt, rubbish etc. i/c disposal of silt with in Municipal dump, sealing of all joints of sewer line found linking from admixture of cement suitable chemical installation of adequate-rubber of over pumping system, leak proof standing arrangement on u/s d/s of working length temporarily rising main etc. for smooth flow of sewerage system to avoid flood in power connection with stand by gen. set of 62.5KVA Gas detector for air ventilator etc. and provision of safety equipment, traffic control arrangement & proper light at night, barricading display of sign board complete insurance of work man cleaning of site removal of all hindrance/obst, unforeseen item. Permission from other departments (Deptt. will only assist in getting the permission etc) cutting of bituminous road, execution demolition of brick work as per site requirement and making good the same as per direction of Engineer-in-charge for which nothing extra shall be paid. (Specification attached). Brief specification of super sucker machine:- The minimum required truck chassis size shall be Mahindra Blazo or Equivalent make of other companies.(Euro-IV version) Drive Unit -250HP, Jetting Pump-440LPM(min.), Maximum working pressure=200 bar, Air handling capacity -5500m3 /hour with minimum vacuum of 80%, Minimum fresh water tank capacity – 5000Ltr.

Bidder Name

Amount

M/s M.L.Enterprises(GSTN-NA)

Parveen Kumar Contractor(GSTN-NA)

M/s M.L.Enterprises

Parveen Kumar Contractor