PROVISION OF GEYSER, AIR CONDITION, CEILING FANS, EXHAUST FAN, GARDEN LIGHT LIGHTENING CONDUCTOR AT DIFFERENT LOCATION AT NEW CANTT PRAYAGRAJ

Amount

S&F vertical /horizontal water heater storage type, electrically operated of capacity 25 litres, BEE 5 star rated ABS/ steel body and inner tank made with stainless steel duly thermal insulated with 2 KW heating element complete with and including vent pipe , fusible plug, safety valve, earth connector, PVC connections(hot and cold) and electric connection all as specified and directed. Make:- Havells (Cat Part No GHWAMGTWH025 , Crompton (Cat Part No.Matteo 25) , Bajaj (Cat part No. MAJ 25GL (New) as approved by GE.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F CP Stop valve / angle valve 15 mm bore, fancy type chromium plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V, 20Amps complete all as specified and directed.

S&F in bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F Chromium Plated connection 450 mm long for hot water outlet supply from geyser complete all as specified & directed

M&L for point wiring with FRLS PVC insulated, unsheathed electric cable , 1100V grade AC, single core multi stranded copper conductor of size 2.5 Sq.mm nominal cross sectional area for phase & neutral drawn through & including non metallic rigid PVC conduit not less than 20 mm dia & 1.8 mm wall thickness with all conduit accessories in concealed wiring system & 2.5 Sqmm green FRLS PVC insulated, unsheathed stranded copper conductor earth wire connected to earth dolly by providing lugs including galvanized 1.5 mm thick sunken boxes 60 mm deep with ISI marked laminated sheet cover 3.0 mm thick complete for 15 Amp socket outlet point on independent board controlled by one, one way switch for geyser complete all as specified and directed

S & F Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170v to 250v with out put voltage stabilizer at 230v with accuracy of + 2.5% and of capacity 5 KVA complete all as specified & directed.

M&L for concealed sub main (For AC) wiring using FRLS PVC insulated, unsheathed stranded copper conductor cable two single core of size 4.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 4.00 Sq as earth continuity conductor complete all as specified & directed. Note:- Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length.

Supply and Fixing ceiling fan with down rod, fan connector/ fan hook, 1200mm sweep, 240 V AC, 5 star rating with 3 Blade and connecting up including provn of three core PVC insulated multi stranded flexible copper conductor cable of size 1.5 sqmm copper wire from ceiling rose to fan of length not less than 0.5 mtr. all as specified & directed.

S&F round recess mounting LED 15 watt edge lit slim down light with die cast aluminium housing finished in premium white powder coating, efficacy 100lm/w volts AC recessed type with suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.

M&L for point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FR PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and modular metal flush sunken box 60 mm deep & 1.6 mm thick duly painted inside and anticorrosive out side for mounting switches, sockets, fan regulators etc with modular white cover plate with frame of suitable size, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar (1:4) and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan etc complete all as specified and directed. Note : (a) Switch/bell push/fan regulator etcwill be measured and paid separately (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surfaces. (c) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire

S&F switch piano, flush type, single pole, one way, 5 amps 230 volts white finish, ISI marked complete all as specified and directed.

S & F landscape light LED garden light of 10 watt capacity IP 65 rated LED Bollard with robust design and efficient light distribution with all connected PCC works and nut ,bolt etc including testing complete all as specified and directed

S&F of FRP/ SMC Junction box of approximate size 130 x 180 x 77 mm , press moulded , front openable, side hinge complete with bakelite connector 4 Nos ,supported on FRP/DMC insulator , MCB SP 06 amps capacity with necessary fixing arrangements by providing MS clamps 1 Nos made out of MS flat 25x3 mm including nuts ,bolts and washers etc fixed with mechanical fasteners of size 250x200x100 mm suitable for 3 phase ,4 wire system including aluminium bus bar of 100 apms rating capacity complete all as specified and directed.

M &L for three core 1.5 sqmm copper conductor cable for connecting up street/ security light with pole junction box complete all as specified & directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items

Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out for electric cable complete in any type of soil complete all as specified & directed

Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point all as specified & directed

Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick all as specified & directed

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

Supply & laying sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) complete all as specified and directed. Note: Only punned depth shall be measured & paid.

S&F Exhaust fan, steel body AC single Phase. 230V of size 380 mm single phase 230 V AC , 900 RPM Range complete with louvers including making hole & grouting in wall , mounting frame with nut, bolts, washers, fasteners , etc and connecting exhaust fan to ceiling rose including provision of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection & testing complete all as specified & directed.

Supply, installation, commissioning and testing of 5 star rated split air condition of capacity 1.5 TR (4500 Kcal/Hr) complete with cordless remote control unit and air ionizer and plasma filter for better air quality. Indoor unit shall be Hi wall mounted type suitable for 230 volts, 50 Hz, single phase AC supply and capable of performing the function as cooling, air circulating and filtering. The air condition shall be complete with automatic temperature control ( by comprising of variable speed / variable tonnage depending upon heat load inside the room) with electronic thermostat complete as per IS 11338 of 1985. Outdoor unit of the AC shall be fitted with discharge cooled type rotary / scroll compressors operating on non CFC refrigerant with suitably rated capacitors start electric motor equipped with overload protection and duly mounted on resilient mounting for quite operation. The casing of indoor unit shall be made of ABS/HIPS/GS. The control box of the indoor unit shall with stand flame retardant test to grade V/O as per UL 94. The filter packs provided shall be washable. Remote cordless control with LCD/LED display shall be provided on indoor unit and on handset. Overall powder factor of the unit shall not be less than 0.85 at operating conditions. The inverter type AC shall correlate to the values as specified by the OEM and latest IS/BIS certification as mentioned in the table 2.2 of the Gazette of India notification No. 024 (E) dated 5 Jan 2010 issued by central Government of India.

Supply, installation, commissioning and testing of 5 star rated split air condition of capacity 2.0 TR (6000 Kcal/Hr) complete with cordless remote control unit and air ionizer and plasma filter for better air quality. Indoor unit shall be Hi wall mounted type suitable for 230 volts, 50 Hz, single phase AC supply and capable of performing the function as cooling, air circulating and filtering. The air condition shall be complete with automatic temperature control ( by comprising of variable speed / variable tonnage depending upon heat load inside the room) with electronic thermostat complete as per IS 11338 of 1985. Outdoor unit of the AC shall be fitted with discharge cooled type rotary / scroll compressors operating on non CFC refrigerant with suitably rated capacitors start electric motor equipped with overload protection and duly mounted on resilient mounting for quite operation. The casing of indoor unit shall be made of ABS/HIPS/GS. The control box of the indoor unit shall with stand flame retardant test to grade V/O as per UL 94. The filter packs provided shall be washable. Remote cordless control with LCD/LED display shall be provided on indoor unit and on handset. Overall powder factor of the unit shall not be less than 0.85 at operating conditions. The inverter type AC shall correlate to the values as specified by the OEM and latest IS/BIS certification as mentioned in the table 2.2 of the Gazette of India notification No. 024 (E) dated 5 Jan 2010 issued by central Government of India.

S & F 8 mm Aluminum Round Conductor complete meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) , Make: OBO Type No. RD 8/ALU or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make complete all as specified & directed.

S & F polyamide Roof conductor holder for parapet with M8 female thread or diameter 7mm, M8 screw to connect the conductor holder, weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance complete all as specified & directed. Make: OBO Type No. 177 30 M8 (5207 46 0 ) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make.

S & F Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance complete all as specified & directed. Make: OBO Type No. 165 MBG-8- 10(5218700) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make.

S & F Roof conductor holder for sheet as specified in drawing , Bottom section stainless steel (V2A) with Ø 8.5 mm slot made of Conductor holder of polyamide @ every 1mtr distance complete all as specified & directed. Make: OBO Type No. 159 K-VA (5216 81 8) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make.

S & F Vertical air terminal with accessories as per IS-IEC -62305 part-3 16mm rod tapered to 10 mm aluminium rod meeting with the technical specification according to DIN EN 50164- 2 (VDE 0815 part 202). meets the requirement of VDE0185/305(IS/IEC 62305) 4Mtr Air terminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load complete all as specified & directed. Make: OBO Type No. 101 VL4000 ( 5401995 ) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S&F complete system consisting Fang Fix with base and clamp, on the top air terminal is erected. Fang fix clamp made of SS, lightning tested for 100 KA 10/350 micro sec waveform. 16 KG stone of 365 mm diameter, high level of stability. Quick and easy mounting of interception rod complete all as specified & directed. Make: OBO or equivalent of Furse of ABB or ERICO or any equivalent E-in-C Branch approved make .

S&F 16 KG stone of 365 mm diameter, high level of stability, quick and easy mounting of interception rod using anchors with concrete, frost-resistant and stacked complete all as specified & directed. Make: OBO Type No. F-FIX S16 ( 5450080 ) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S&F cross universal connector for T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required including installation with 4 hexagonal bolts M8*25 with M8 hexagonal nuts complete all as specified & directed. Make: OBO Type No.251 8-10 ( 5312 03 5 ) or equivalent of Furse of ABB or ERICO or any equivalent E-in-C Branch approved make

S&F expansion piece with connector for equalising temperature related length changes with necessary on conductors length over 20 meters, for round conductor Rd 8/ALU complete all as specified & directed. Make: OBO Type No. 172 AR ( 5218 92 6 ) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S&F T cross and parallel connectors & quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised & conforming to the requirements according to DIN VDE 0185-305 (IS-IEC 62305)(2nos/expansion piece ) complete all as specified & directed. Make: OBO Type No. 249 8-10 ST ( 5311 50 0 ) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S & F 8 mm Aluminum Round Conductor complete with meeting the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) complete all as specified & directed. Make: OBO Type No. RD 8/ALU or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make.

S & F Polyamide Roof conductor holder for parapet with M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder, weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance complete all as specified & directed. Make: OBO Type No. 177 30 M8 (5207 46 0 ) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S&F Test Joint (Folding Clamp) made of SS,suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing complete all as specified & directed. Make: OBO Type No. 271 8-10(5317481) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S&F Magnetic card with holder to record the pulded/lightening currents for mounting on round conductor Rd 8-10.Simple holder mounting through clamping complete all as specified & directed. Make: OBO Type No. MK-B ( 5091322) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S & F Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required, flat conductor shall be of Hot Dipped & Cross sectional area of 90mm square according to DIN EN 50164-2 (VDE 0185 part 202) with meeting the requirement of VDE0185/305(IS-IEC 62305) Zinc coating: 500 g/m square (Approx :70 micron coating) should be tested and used exclusively for lightning protection earthing system and ring equipotential bonding complete all as specified & directed. Make: OBO Type No. 5052 DIN 30X3 ( 5450436) any E-in-C Branch approved make complete all as specified & directed.

S & F Cross connector for Flat suitable for 30mm Galvanised steel strip & installation with 4 nos of hexagonal plate complete all as specified & directed. Make: OBO Type No. 255 FL30 FT (5314 53 4 ) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S & F flat conductor holder suitable for FL 30 & Installation with 2 hexagonal bolts complete all as specified & directed. Make: OBO Type No. 166 LS 70 ( 5226 57 0 ) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make .

S & F Plastic Corrosion Protection strip of approx 1.1 mm thick, width 50mm made of petrolatum- coated chemical fibre fabric complete all as specified & directed. Make: OBO Type No.356 50 ( 2360 05 5 ) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S & F UL Listed & CPRI Tested maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 complete all as specified & directed. Make: OBO Type No. 17 3000 CCER(5450014) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S&F Universal clamp made of SS to connect rod with flat conductor complete all as specified & directed. Make: OBO Type No. 17 25 RTC(5450068) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make.

S&F Earth conductivity enhancing compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested complete all as specified & directed. Make: OBO Type No. OEC 2 25(5450058) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

S&F Heavy duty earth champers of 5000kg load bearing capacity to ensure the safety of earthing system complete all as specified & directed. Make: OBO Type No.UFE(5450030) or equivalent of Furse of ABB, ERICO or any equivalent E-in-C Branch approved make

IMPORTANT NOTE FOR sL ITEM NO. 26 TO 47: 1) Design/Drawing/BOM/Technical Specifications of the complete lighting protection system showing the layout including dimensions is to be obtained from OEM strictly keeping in view the actual ground requirements & the same is to be got approved from GE before placing final order to the OEM. 2) Any item missed out in the technical specification, but technically required for efficient working of the system in deemed to be included in the unit quote rate. 3) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm 4) The complete work of the lightning protection system is to be got done from the OEM or their autherized sister concern/ channel partner only.

Mohit Enterprises

P S TRADERS

Hi-Tech Constructions

DINESH ELECTRICALS