Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹13.1 L+₹4,103.15 (0.31%)Rejected-Finance KG 115 SABIRA MANZIL HBR 2ND STAGE VENKATESH PURAM BANGALORE 560 045 | BENGALURU URBAN | KARNATAKA | 560045 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹13.5 L+₹47,102.91 (3.61%)Rejected-Finance M S RRK PROJECTS D 306 ADG P CHENNAI 11 3RD CROSS SIR MV LAYOUT VIDHYARANYAPURA POST BANGALORE 560097 | BENGALURU URBAN | KARNATAKA | 560097 | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹14.0 L+₹92,210.20 (7.06%)Rejected-Finance 101 1ST FLOOR JASOL RESIDENCY 14TH CROSS KANAKANAGAR R T NAGAR POST BANGALORE 560032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹14.6 L+₹1.5 L (11.4%)Rejected-Finance | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
7 Mar 2020, 6:00 pmClosed
GARRISON ENGINEER (SOUTH) BANGALORE
GARRISON ENGINEER (SOUTH) BANGALORE NO 1, ULSOOR ROAD BANGALORE-560 042
AS PER BOQ AND TENDER DOCUMENT
2020_MES_320504_1
GE(S)/B/8381/E8
Open Tender
Civil Works
Item Rate
180 days
BANGALORE
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (SOUTH) BANGALORE
₹30,000
Yes
20 Apr 2020
31 Jan 2020
10 Mar 2020
31 Jan 2020
7 Mar 2020
15 Feb 2020
31 Jan 2020 - 6 Feb 2020
Amount
Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.
M&L for point wiring with surface type with PVC insulated, unsheathed, single core multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through 20mm dia PVC conduit ISI marked with its acessories fixed in sunk boxes and covered with 3.0mm thick ISI marked laminated sheet cover and brass screw with cup washers for switches/sockets/regulators etc for one light /CB point controlled by one piano type switch single pole one way complete all as specified and as directed.
All as per item No. 2 here-in-before but for one fan point controlled by one switch complete all as specified and as directed.
All as per item No. 2 here-in-before but for one 3/2 Pin 5 Amp socket out let point on independent board complete all as specified and as directed.
All as per item No. 2 here-in-before but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches complete all as specified and as directed.
All as per item No. 2 here-in-before but for one light point controlled by 2 way switch 5 amp single pole complete all as specified and as directed.
All as per srl item no 02 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket outlet point complete all as specified and as directed.
S&F switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed.
S&F switch piano, flush type single pole, two way 5 Amps complete all as specified and as directed.
S&F switch socket outlet 2in1, 3pin, 5 Amp complete all as specified and as directed.
S&F switch socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and as directed.
M&L for ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed.
S&F in repair stepped type electronic fan regulator flush type, 230 volt, AC complete all as specified and as directed.
S&F bell push, flush type, 5 Amps complete all as specified and as directed.
S&F call bell AC, 230 volts single pole complete all as specified and as directed.
S&F in repair MCB SP 06-32 Amp, AC, 240 volts, 50 Hz, 10 KA rating"C' curve complete all as specified and as directed. Make: Indoasian Cat No: 811122 to 811129/Legrand Cat No 408587 to 408595/Schneider Cat No A9N1P06C to A9N1P32C
S&F in repair MCB SPN 6 -32 Amps, 240 volts complete all as specified and as directed. Make: Indoasian Cat No: 811144 to 811151/Legrand Cat No 408609 to 408617/Schneider Cat No A9N2P06C to A9N2P32C
S&F in repair MCB TPN 63 Amps, 415 volts complete all as specified and as directed. Make: Indoasian Cat No: 811220/Legrand Cat No 408683/Schneider Cat No A9N4P63C
S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down old unserviceable DB complete all as specified and as directed. Make: Indoasian Cat No: 811816 or equivalent in Havells/Legrand/Standard.
S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 8 way, 200Amps rated bus bar 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down old unserviceable DB complete all as specified and as directed. Make: Indoasian Cat No: 811818 or equivalent in Havells/Legrand/Standard.
M&L for sub main wiring surface type with two runs of single core, PVC insulated unsheathed multi-stranded copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi-stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including ISI marked rigid PVC conduit of size 20mm with all necessary accessories such as bends, tees, junction boxes, elbows etc including cutting chasing existing surface to conceal the conduit and making good to the disturbed surface to match with existing surface including taking down old sub main wiring complete all as specified and directed. Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length.
M&L for sub main wiring surface type with two runs of single core, PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi-stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including ISI marked rigid PVC conduit of size 20mm with all necessary accessories such as bends, tees, junction boxes, elbows etc including cutting chasing existing surface to conceal the conduit and making good to the disturbed surface to match with existing surface including taking down old sub main wiring complete all as specified and directed. Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length.
S&F LED batten 20 watt, 4 feet long suitable for indoor applications with integrated electronic driver of operating voltage 110 to 270 Volts , lumin output not less than 1800 lm including connecting up and taking down existing unserviceable surface/ceiling mounted FTL fitting complete all as specified and as diretcted. Make:- Bajaj Cat No. BCLAB 20W /C&S Cat No LTTB4F20WLED/W or equivalent in Crompton.
S&F LED batten 18 watt, 4 feet long suitable for indoor applications with integrated electronic driver of operating voltage 110 to 270 Volts , Lumin output not less than 1800 lm including connecting up and taking down existing unserviceable surface/ ceiling mounted 28/36 watt FTL fitting complete all as specified and as diretcted. Make:- Bajaj Cat No. BCLSBAL 18WCW/Crompton Cat No LCTL-18-CDL or equivalent in C&S.
S&F LED retro bar 18 watt, 4 feet long suitable for indoor applications polycarbonate housing, glare free light output, retrofi compatibility & easy installation with operating voltage 110 to 270 Volts , lumin output not less than 1800 lm including connecting up and taking down existing unserviceable one complete all as specified and as diretcted. Make:- Bajaj Cat No.830148 18W CDL/Jaguar Cat No LTBLGLX020XC
Supply and fix LED batten type, 10 watt, 2 feet long, suitable for indoor applications with integrated electronic driver of operating voltage 110 to 265 Volts Lumin output not less than 900 lm including connecting up and taking down existing unserviceable surface/ ceiling mounted 14/18/20 watt FTL fitting complete all as specified and as diretcted. Make:- Bajaj Cat No : BCLSB 10 WH/C&S Cat No LTTB2F10WLED/W or equivalent in Crompton.
S&F LED batten type, 5 watt, 1 feet long, suitable for indoor applications with integrated electronic driver of operating voltage 110 to 265 Volts lumin output not less than 900 lm including connecting up and taking down existing unserviceable surface/ceiling mounted FTL fitting complete all as specified and as diretcted. Make:- Bajaj Cat No : BCLSB 05 NW/C&S Cat No LTTB1F5WLED/W
S&F in replacement LED bulk head 10 Watt with PDC aluminium housing and milky diffuser complete all as specified and directed. Make:- Bajaj Cat No : BIBWP10WLED/C&S Cat No LTB10WLED/Crompton Cat No LBH-10-CDL
S&F LED down lighter 12 watt surface mounted slim panel down lighter square type with integrated electronic driver of operating voltage 110 to 265 Volts including connecting up and taking down existing unserviceable ceiling mounted CFL light fitting complete all as specified and as diretcted. Make:- C&S Cat part No- LTCRSUR12LEDSQ/W / Bajaj Cat No BPSLR12W WH SQ /Crompton Cat No LSCSM-12W-CDL/NW/WW
S&F LED down lighter 18 watt surface mounted slim panel down lighter Squrae type with integrated electronic driver of operating voltage 110 to 265 Volts including connecting up and taking down existing unserviceable ceiling mounted light fitting complete all as specified and as diretcted. Make:- C&S Cat part No- LTCRSUR18LEDSQ/W / Bajaj Cat No BPSLR18W WH SQ /Crompton Cat No LSCSM-18W-CDL/NW/WW
M&L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished iron strip 25x4 mm by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 (with 20mm graded stone aggregate),chamber and 50mm thick precast RCC (1:2:4) cover slab re-inforced with XPM Jalli including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed .
M&L for opening, cutting and taking out complete winding coils of ceiling fan of 1200/1400 mm sweep of any make, rewinding the same with super enamalled copper winding wire as per original pattern including varnishing and assembling after oiling/greasing and replacing the worn out nuts, bolts, washers, bearings etc and testing the ceiling fan on load for two hours complete all as specified and as directed.
M&L for opening, cutting and taking out complete winding coils of exhaust fan of 230/300 mm sweep of any make, rewinding the same with super enamalled copper winding wire as per original pattern including varnishing and assembling after oiling/greasing and replacing the worn out nuts, bolts, washers, bearings etc and testing the exhaust fan on load for two hours complete all as specified and as directed.
S&F capacitor of rating 2.5/3.15 mfd 230 volts including taking out defective capacitor complete all as specified and as directed.
S&F ceiling fan with electronic type regulator and accessories 230 V, 1200mm sweep, BEE 5 star rated, ISI standards, RPM 340, Air delivery 210CMM, down rod length 300mm, rust free powder coated finish and pre wired and including connecting up with twin core twisted flexible copper conductor cable with connector including dismatling unserviceable ceiling fan from existing position and depositing to AGE E/M Store yard complete all as specified and directed. Make:- Bajaj Electra 50 product code 250254 or equivalent make of crompton/Havells.
S&F water heater storage type electric capacity 25 ltrs, BEE 5 star rated and pre-wired and including connecting up with three core copper conductor cable with 15 Amps plug top including dismatling old one of any capacity and deposit to AGE E/M Store yard complete all as specified and directed. Make:- Bajaj model Shakti GPV product code 150747 or equivalent make of Crompton/Havells
S&F exhaust fan, metal body of size 250 mm sweep, single phase, 220/240 V including electrical connection and dismatling unserviceable exhaust fan from existing position and depositing to AGE E/M Store yard complete all as specified and directed. Make:- Bajaj Model MAXIMA DX Product Code 70049 or equivelent CG/Havells.
Taking down defective Geyser of capacity 25/ 50 ltrs of any make from its existing position after disconneing inlet/outlet water connection and opening of geyser for checking and repairing the defective parts including testing and commissioning the same after successful repairing painting with synthetic enamel paint(duco) by spraying after preparation of the steel surfaces and refixing the same on its existing position and making connection inlet/outlet water connection complete all as specified and directed. Note:-(i)The replaced defective parts will be measured and paid seperately as supply only items under the relvant items of this BoQ (ii)Labour charges required for replacement of spares shall deemed to be included in the unit rate quoted by the tenderer.
Supply only heating element 2 KW/ 1.5 KW ISI marked any type for 25/50 ltrs capacity Geysers all as specified. (Make - Bajaj/Manasi or equivalent as approved by GE)
Supply only thermostat for 25/50 Ltr cap geyser and making connection complete all as specified and as directed.
S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450mm complete all as specified and as directed.
S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 600mm complete all as specified and as directed.
S&F in repair plug top 3 pin 15A ISI marked complete all as specified and as directed.
S&F in repair batten holder suitable for B-22 cap ISI marked complete all as specified and as directed.
S&F in repair adaptor suitable for B-22 cap ISI marked complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep and getting out in hard/dense soil complete all as specified and as directed.
Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.
Removal of excavated surplus soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.
M&L for sand cushioning to under ground cable in layers ( 8 cm before laying the cable and 15 cm after laying the cable and punned into 18 cm thickness) in trenches for cable protection complete all as specified and directed. Note : - Punned thickness only will be measured and paid under this item.
Supplying and laying sub class 'B' bricks locally available best quality, designation 75 for cable protection complete all as specified and as directed.
M&L for plain cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate as in coping of poles complete all as specified and directed.
Supply and laying or fixing or passing in trenches/ on pole / through pipes, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor of cross sectional area 4 core 16 sq mm including connection with cable glands & lugs etc and testing on completion incl taking out old unserviceable cable complete all as specified and as directed. Note for item nos. 54, 55 & 56: Excavation & earth work, sand cushning and bricks,GI protection pipes shall be measured and paid seperately under relevent items of this Sch.
Supply and laying or fixing or passing in trenches/ on pole / through pipes, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor of cross sectional area 3.5 core 50 sq mm including connection with cable glands & lugs etc and testing on completion incl taking out old unserviceable cable complete all as specified and as directed.
Supply and laying or fixing or passing in trenches/ on pole / through pipes, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor of cross sectional area 3.5 core 70 sqmm including connection with cable glands & lugs etc and testing on completion incl taking out old unserviceable cable complete all as specified and as directed.
S&F LED 30 watts street lighting luminaries including connecting up with suitable copper conductor cable including testing and taking down the old unserviceable street light fitting from RCC /steel pole after disconnecting electrically complete all as specified and as directed. Make:- Wipro Cat Part No.LR02-331-XXX-57-XX or equivalent in Bajaj/havells/Crompton.
S&F LED 45 watts street lighting luminaries including connecting up with suitable copper conductor cable including testing and taking down the old unserviceable street light fitting from RCC /steel pole after disconnecting electrically complete all as specified and as directed. Make:- Wipro Cat Part No.LR02-501-XXX-57-G1 or equivalent in Bajaj/havells/Crompton.
S&F LED 60 watts street lighting luminaries including connecting up with suitable copper conductor cable including testing and taking down the old unserviceable street light fitting from RCC /steel pole after disconnecting electrically complete all as specified and as directed. Make:- Wipro Cat Part No.LR02-671-XXX-57-G2 or equivalent in Bajaj/havells/Crompton.
S&F LED 30 watts flood light including connecting up with suitable copper conductor cable including testing and taking down the old unserviceable street light fitting from RCC /steel pole after disconnecting electrically complete all as specified and as directed. Make:- Bajaj Cat Part No. BJFL 30W LED or equivalent in C&S/Havells/Crompton.
Supply and fix in repair LED out door drivers of 25W capacity complete all as specified and as directed. Make :- Wipro/Phiips/CG/Bajaj
Supply and fix in repair LED out door drivers of 45W capacity complete all as specified and as directed. Make :- Wipro/Phiips/CG/Bajaj
Supply and fix in replacement Thermoplastic cable junction box IP 66 halogen free and weather proof for out door installation( with metric knockouts for cable entry ) of size 139x119x70 mm including taking down old unserviceable PVC loop in loop out box complete all as specified and directed. Make:- HENSEL Cat part no KF5065 or equivalent make as approved by GE.
M&L for LT straight through joint for under ground cable of sizes 3.5 / 4 Core upto 50 sqmm complete all as specified and directed. Make:- Raychem/M-Seal/3-M/Dennison
M&L for LT straight through joint for under ground cable of sizes 3.5 / 4 Core 70 to 180 sqmm complete all as specified and directed. Make:- Raychem/M-Seal/3-M/Dennison
S&F 50 mm dia GI pipe light grade for cable protection fixed with poles/bldg including two nos MS clamps made to shape out of 25 x 3mm MS flat and painting including bolt, nut, washer etc. complete all as specified and as directed.
S&F MCCB 3 pole 100 Amps, AC 415 V, 50 Hz with rupturing capacity 16 KA including taking down unserviceable MCCB and connecting to existing panel board or enclosure etc complete all as specified and as directed.
S&F MCCB 3 pole 200 Amps, AC 415 V, 50 Hz with rupturing capacity 25 KA including taking down unserviceable MCCB and connecting to existing panel board or enclosure etc complete all as specified and as directed.
S&F MCCB 3 pole 250 Amps, AC 415 V, 50 Hz with rupturing capacity 25 KA including taking down unserviceable MCCB and connecting to existing panel board or enclosure etc complete all as specified and as directed.
M&L for preparing the surfaces of street tubular poles 9 mtr long and applying one coat of synthetic enamel paint (Glossy silver paint) of approved shade complete all as specified and as directed.
M&L for preparing the surfaces of PCC poles and applying one coat of cement based paint of approved shade complete all as specified and as directed.
M&L for preparing the surfaces of street light brackets made out of GI tubing 40mm dia, 1.2 m long and painting with a coat of silver paint complete all as specified and as directed.
GS TRADERS
RRK PROJECTS
Vasavi Electricals
kamadhenu Electricals
CITIZEN ELECTRICALS
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .