SEPCIAL REPAIR / REPLACEMENT LT OVERHEAD LINE TO UG CABLE IN ADMIN AND SMQ AREA AT 25ED AF STATION DEOLALI

Amount

Dismantling & taking down existing ACSR conductor with GI guard wire of any size and type and including insulators and cross arms any size and type from existing postion complete all as directed.

M&L for in repair of jointing & testing heat shrinkable cable joint kit , straight through , out door type for 1100 volts LT XLPE/PVC insulated cable of aluminium conductor up to 50sqmm 3.5 core cable including necessary jointing work all as specified & directed

M&L inrepair for jointing & testing heat shrinkable cable joint kit , straight through , out door type for 1100 volts LT XLPE/PVC insulated cable of aluminium conductor 50sqmm to 120 sqmm 3.5 core cable including necessary jointing work all as specified & directed

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in soft soil.

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in hard/dense soil.

Returning Filling in including spreading, leveling, watering & well ramming in layers n. exc 25 Cm.

Removing excavated/Surplus soil n exc 50 Mtr & depositing where directed at a level n. exc 1.5 Mtr above the starting point.

M&L in repair for double wall corrugated (DWC) duct (dure guard) as per IS 14930 part II LT UG cable protection including coupler, elbows, T joiints, Bends etc. and test report Make: Dura line/ Gemini/ Rex of size 38 mm inner dia al as per direted by Engr in charge.

M&L in repair for double wall corrugated (DWC) duct (dure guard) as per IS 14930 part II LT UG cable protection including coupler, elbows, T joiints, Bends etc. and test report Make: Dura line/ Gemini/ Rex of size 63 mm inner dia all as per direted by Engr in charge.

Supply and laying in repairs LT XLPE insulated/PVC heavy duty armoured cablle 1100 volts grade UG stranded aluminium conductor electric cable cross sectional area 25 Sqmm 3.5 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 70 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 50 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 35 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 16 Sqmm 4 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 95 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed. (Make Havells)

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 16 Sqmm 2 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 10 Sqmm 2 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

Supply and laying in repairs LT XLPE insulated heavy duty armoured cablle 1100 volts grade, multi-stranded aluminium conductor electric cable, cross sectional area 120 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements all as specified and directed.

M&L inrepair for Cable route indicator fabricated from 40x40x6mm angle iron 450mm long, rivited or welded with 100mm dia CI or MS roung disc duly engraved " LT cable" in letters including grouted in ground with PCC 1:4:8 type D-2 compete all as specified and directed by Eng in Charge

M & L inrepair for cement concrete (1:3:6 ) type C-1 using 20 mm graded stone aggregate, including weathering, slightly rounded Chamfered angles and throating including necessary form work all as directed .

M & L inrepair for cement concrete (1:4:8 ) type D-2 using 40 mm graded stone aggregate, in foundation all as directed .

Material and labour for boring of holes under road, pavement, hardstanding by trenchless technology of 80 mm dia and including HDPE pipe of 80 mm dia and making good the disturbed surface to match with the adjancent surface all as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI strip 25x4 mm through GI pipe 40 mm dia light grade by means of bolts,nuts, check nuts and washers of galvanised iron or steel,with adequate quantity of charcoal and salt, proper watering arrangements including 20 mm dia medium grade GI tubing.PCC chamber,Chamber Cover all as shown in electrical plate no 3of SSR part I 2009 connected to earthing test point all as specified or indicated and testing on completion. The end point connection of eatrhing will be carried out with the help of GI bolt grouted and washer and nut.

Supply, install, testing and commissioning of cubicle type outdoor LT feeder pillar box fabricated out of 3.15mm thick CRCA sheet with locking arrangement, painted with epoxy powder coated over a coat of red oxide primer, factory made, cubicle type, double door hinged type, both side openable, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40x40x5 mm angle iron frame, adequate clearance from ground level for the entry and exit of cables, manufacturer details, necessary PCC work for grouting and provn of cable lugs for connection, internal metering connections with suitable copper cable mounted on cable tray and internal power connection with single core flexible copper cable/busbar of suitable capacity etc. complete and consisting of following:- (a) MCCB 100 Amp 4 pole, 25 KA -01 Nos ( as main incomer), (b) MCCB 40 Amp TP16 KA - 04 Nos ( as out going ) , (c) Aluminum TPN bus bar 200 Amp mounted on insulators duly colour coded heat shrinkable sleeve (d) Digital ammeter alongwith suitable CTs (e) Digital voltmeter. (f) RYB LED indications (g) Terminals for input( 01 No) and outpot cables ( 04 Nos) , copper cables connection for input terminal to MCCB and from outgoing MCCB to output terminals

Supply, install, testing and commissioning of cubicle type outdoor LT feeder pillar box fabricated out of 3.15mm thick CRCA sheet with locking arrangement, painted with epoxy powder coated over a coat of red oxide primer, factory made, cubicle type, double door hinged type, both side openable, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40x40x5 mm angle iron frame, adequate clearance from ground level for the entry and exit of cables, manufacturer details, necessary PCC work for grouting and provn of cable lugs for connection, internal metering connections with suitable copper cable mounted on cable tray and internal power connection with single core flexible copper cable/busbar of suitable capacity etc. complete and consisting of following:- (a) MCCB 100 Amp 4 pole, 25 KA -01 Nos ( as main incomer), (b) MCCB 63 Amp TP 16 KA - 02 Nos ( as out going ) , (c) Aluminum TPN bus bar 200 Amp mounted on insulators duly colour coded heat shrinkable sleeve (d) Digital ammeter alongwith suitable CTs (e) Digital voltmeter. (f) RYB LED indications (g) Terminals for input( 01 No) and outpot cables ( 04 Nos) , copper cables connection for input terminal to MCCB and from outgoing MCCB to output terminals

Supply, install, testing and commissioning of cubicle type outdoor LT feeder pillar box fabricated out of 3.15mm thick CRCA sheet with locking arrangement, painted with epoxy powder coated over a coat of red oxide primer, factory made, cubicle type, double door hinged type, both side openable, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40x40x5 mm angle iron frame, adequate clearance from ground level for the entry and exit of cables, manufacturer details, necessary PCC work for grouting and provn of cable lugs for connection, internal metering connections with suitable copper cable mounted on cable tray and internal power connection with single core flexible copper cable/busbar of suitable capacity etc. complete and consisting of following:- (a) MCCB 63 Amp 4 pole, 16 KA -01 Nos ( as main incomer), b) MCCB 40 Amp 16 KA - 04 , (c) Aluminum TPN bus bar 200 Amp mounted on insulators duly colour coded heat shrinkable sleeve (d) Digital ammeter alongwith suitable CTs (e) Digital voltmeter. (f) RYB LED indications (g) Terminals for input( 01 No) and outpot cables ( 04 Nos) , copper cables connection for input terminal to MCCB and from outgoing MCCB to output terminals

Supply, install, testing and commissioning of cubicle type outdoor LT feeder pillar box fabricated out of 3.15mm thick CRCA sheet with locking arrangement, painted with epoxy powder coated over a coat of red oxide primer, factory made, cubicle type, double door hinged type, both side openable, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40x40x5 mm angle iron frame, adequate clearance from ground level for the entry and exit of cables, manufacturer details, necessary PCC work for grouting and provn of cable lugs for connection, internal metering connections with suitable copper cable mounted on cable tray and internal power connection with single core flexible copper cable/busbar of suitable capacity etc. complete and consisting of following:- (a) MCCB 63 Amp 4 pole, 16 KA -01 Nos ( as main incomer), (b) MCCB 40 Amp TP16 KA - 02 Nos ( as out going ) , (c) Aluminum TPN bus bar 200 Amp mounted on insulators duly colour coded heat shrinkable sleeve (d) Digital ammeter alongwith suitable CTs (e) Digital voltmeter. (f) RYB LED indications (g) Terminals for input( 01 No) and outpot cables ( 04 Nos) , copper cables connection for input terminal to MCCB and from outgoing MCCB to output terminals

Supply, install, testing and commissioning of cubicle type outdoor LT feeder pillar box fabricated out of 3.15mm thick CRCA sheet with locking arrangement, painted with epoxy powder coated over a coat of red oxide primer, factory made, cubicle type, double door hinged type, both side openable, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40x40x5 mm angle iron frame, adequate clearance from ground level for the entry and exit of cables, manufacturer details, necessary PCC work for grouting and provn of cable lugs for connection, internal metering connections with suitable copper cable mounted on cable tray and internal power connection with single core flexible copper cable/busbar of suitable capacity etc. complete and consisting of following:- (a) MCCB 200 Amp 4 pole, 25 KA -01 Nos ( as main incomer), (b) MCCB 63 Amp TP 16 KA - 04 Nos (C) MCCB 40 AMP TP 16 KA 01 Nos ( as out going ) (c) Aluminum TPN bus bar 300 Amp mounted on insulators duly colour coded heat shrinkable sleeve (d) Digital ammeter alongwith suitable CTs (e) Digital voltmeter. (f) RYB LED indications (g) Terminals for input( 01 No) and outpot cables ( 04 Nos) , copper cables connection for input terminal to MCCB and from outgoing MCCB to output terminals

Supply and install testing and commissioning factory fabricated LT switch panel cubical outdoor type with dust and vermin proof suitable for 3 phase 4 wire 415 volt 50 Hz AC supply made out of sheet steel 3.15 mm thick, including spray painted with two coats of synthetic enamel paint over a coat of primer and double door hinged type, both side openable, holes for cable entries, detachable gland plates at top and bottom, earth connection terminals etc. and mounted on 40x40x5 mm size zinc passivated angle iron frame, adequate clearence from ground level for the entry and exit of cable, manufacturer details, necessary PCC work for grouting and provn of cable lugs for connection etc. and including with the following accessories confirming to IP 54 protection class & CPRI approved. (a) MCCB 400A 36 KA, rated for 415VAC, Qty- 01 Nos (incomming). (b) MCCB 200A 25 KA ,rated for 415VAC,- 02 Nos (Out going). (c) Aluminum TPN bus bar 200 Amp mounted on insulators duly colour coded heat shrinkable sleeve (d) Digital ammeter alongwith suitable CTs (e) Digital voltmeter. (f) RYB LED indications (g) Terminals for input( 01 No) and outpot cables ( 02 Nos) , copper cables connection for input terminal to MCCB and from outgoing MCCB to output terminals

Material and labour for cutting of road pavement hardstanding by manually and making good the distrubed surface to match with the exsting surface all as directed

Rama Electricals

Vinod Enterprises

SV ASSOCIATE

sapana enterprises

SHRI SULAI ELECTRICALS

M/s.NIKI ENTERPRISES

KOYNA ENGINEERS PVT LTD

Datar Electrical and Engg Services

NARMARAJ ELECTRICALS