Improvement works by providing electrical works to the Administrative and DFC wing at Regional office in Erode

Amount

Dismantling and clearing away of Brick Wall in CM for existing Superstructure including cost of all materials, labour charges, tools and plants, all leads and lifts etc,complete as per specification.

Dismantling the existing Aluminium Partition inculding Cost of labour charges, minor T&P's lead, lift etc.,complete.

Cement Solid Block in CM 1:5 using 15cm cement Solid block for super structure including cost of all materials, labour charges, curing, scaffolding charges all leads and lifts etc., complete and as directed by Engineer.

Plastering with CM 1:5,12 mm including cost of cement for Inner/Outer walls including labour, curing, all leads and lifts etc., complete as per standard specification.

Reinforced cement concrete in C.C. 1:2:4 mix using 12 to 20mm HBG machine crushed metal for lintel beam including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement)

Providing steel reinforcement MS/RTS rods for all reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning and tying properly with all leads and lift as per standard specification, etc., complete.

Supplying and fixing in position of colour coated aluminium framed partition and doors of approved quality as directed by the Engineer in charge at site including cost of all materials, labour charges,lead,lift,T&Ps, personal protective equipments, other material appliances, etc., complete. (i) Vertical and horizontal posts colour coated anodized aluminium section 63x38mm of thickness 2.45mm,countrywood filled alround, verticals at spacing of 900 mm c/c and horizontal at 0.0m, 0.90 m & 3.0 m, (ii) MDF board or its equivalent grade board of 12 mm thick both sides prelaminated of exterior grade for a height of 900mm as bottom panel, middle and top panel in 2.10 m & 3.00 m, level. iii) Aluminium beading of weight not less than 0.12 kg/m on both sides of the shutter.

Supply and fixing of bullet hook of suitable size for fixing ceiling fan including drilling of holes in RCC roof, cost of bullet hook, labour, lead, lift etc, complete.

Supplying, fabricating, erecting and fixing of approved quality of GYP board false ceiling using plain sheets (10 mm thick) including cost of all materials , labour, lead and lift etc., (complete).

Wiring with 2 x 2.5 Sq.mm PVC insulated single core unseathed copper conductor Cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with GI switch box in flush with wall with continuous earth line connection of 1.5Sqmm wire and 6 A Switch 1 Module for open light point /Fan point.

Supply and fixing of ceiling luminaire with mirror optics suitable LED light. (Philips/ crompton) including cost of all materials, labour all leads, lifts etc, complete. (LED 20 W of size 9''x9'')

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 1.5sqmm wire with painting of suitable colour.

Supply and fixing of 16A 2pin 3pin combined flush type wall socket with 6A module switch on suitable Flush box as per standard specification including cost of all materials, labour, lead, lift, etc. (Make: legrand -Myrius)

Supply and fixing of 6A 2pin 3pin combined flush type wall socket with 6A module switch on suitable Flush box as per standard specification including cost of all materials, labour, lead, lift, etc.( Make: legrand -Myrius)

Supplying and fixing of 4’ 40W twin box type fluorescent fitting with 20W LED Tube with conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminals to the fitting with tubes. (philips/ Crompton make).

Supplying and fixing of 1200mm (48”)sweep AC ceiling fan with 300 / 600mm down rod with appd best quality make of standard specification with electronic regulators and switch including cost of all materials, labour, fixing, charges as per standard specification, etc., complete. (Make:philips/ Crompton)

Labour charges for laying LAN cable with suitable PVC Rigid pipe of 25 mm dia on wall including cost of pipe, labour, lead, lift charges etc complete (LAN cable supplied by Departmentally).

Supplying and fixing of 12 way two pole and natural MCB sheet steel enclosure distribution board with double door 1 No. 40 Amps and 20Amps DPIC switch of 500V as incoming 24 Nos. 40 amps and 20A SPMCB out going necessary on wall portion with earthy as per standard specification, etc.,

Supplying and fixing of 24 way four and two pole and natural MCB sheet steel enclosure distribution board with double door 1 No. 63 Amps,40Amps,32Amps and 20Amps DPIC switch of 500V as incoming 72Nos. 63 Amps, 40 Amps,32Amps and 20A SPMCB out going necessary on wall portion with earthy as per standard specification, etc.,

Chipping, Clearing and removing the existing damaged flooring and laying the flooring with Double charged vetrified tiles of size 600X600X 8mm of approved quality and colour, with ISI std and pointing with filling materials using 0.40kg/m2 including finishing the joint and pointing flush with tilesurface including cost of all materials,lead, lift, labour, curing etc.,complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allolw leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Supplying and fixing of 1 way single pole MCB, 16Amps on wall surface box 18 module enclosure as per standard specification, etc.,

Supplying and fixing of junction Boxes as per standard specification including cost of all materials, labour, lead, lift,etc., Junction Box -Size 10''x8''

Supplying and fixing of junction Boxes as per standard specification including cost of all materials, labour, lead, lift,etc., Junction Box -Size 8''x6''

Supplying and fixing of junction Boxes as per standard specification including cost of all materials, labour, lead, lift,etc., Junction Box -Size 6''x4''

Supplying and fixing of Module Boxes as per standard specification including cost of all materials, labour, lead, lift, etc.( Make: legrand -Myrius) 18Module Box

Supplying and fixing of Module Boxes as per standard specification including cost of all materials, labour, lead, lift, etc. (Make: legrand - Myrius) 12Module Box

Supplying and fixing of Module Boxes as per standard specification including cost of all materials, labour, lead, lift, etc. (Make: legrand - Myrius) 8Module Box

Supplying and fixing of Module Boxes as per standard specification including cost of all materials, labour, lead, lift, etc. (Make: legrand - Myrius) Dummy Switch.

Inner colour washing with two coats using ready mixed Exterior/ Interior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior/ Interior emulsion water based primer exterior /Interior surfaces with three coats of putty including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty wherever required.

Ceiling colour washing with two coats using ready mixed Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of emulsion water based primer ceiling surfaces including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete.

Supplying and fixing of LAN cable rack 6U 500mm networkway box of heavy duty including cost of all materials, labour, all lead, lift, as per standard specification, etc., complete.

Supplying and fixing of modular socket 6A 3pin -4 Nos and 16A male top 1 No with 4 Nos switch with Frame with cover as per standard specification including cost of all materials, labour, lead, lift, etc complete.

Supply and run of 2 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu Conductor of 1100V Grade in suitable PVC flexiable pipe with continuous earth wire connection of 1.5sqmm wire.

Labour charges for releasing lowering and painting the existing tube light fitting patty with one coat of white colour and painting the pendent rod with one coat of black colour approved enamel paint including cost of scrapping and cost of paint, refixing of fitting, labour, leads, lifts,etc complete.

Supplying and fixing the best quality special type mirror of size 1000x780mm and fixing near the wash basin including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing best quality of SS towel rack 600 mm long with lower hanger and fixing near the wash basin including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position of Wash Hand Basin of approved quality colour & size of 550X400mm with all accessories including cost of all materials, labour charges all leads and lifts etc, complete and as directed by Engineer site.

Supplying and fixing of 25 mm dia PVC pipe 10Kg/cm2 (Shell thickness 2 to 3 mm) for water supply line, including cost of pipe, bend, elbow, labour for cutting, threading, and fixing in position, testing all materials, solution, lead, lift etc., complete.

Supplying and fixing solid core 35mm thick flush shutters with Teak ply on both side with teak wood lipping alround the shutter,including cost of frame of size 100 X 75 mm including cost of all fixtures of standard size and specification, locking arrangements, painting 2 coats of enamel paint over one coat of primer and 2 coats of wood putty, transport charges, labour for fixing, lead, lift etc., complete as directed by the Engineer at site.

Dismantling the Wooden doors and cutting the extra portion, fixing of 8mm thick plywood on both sides of the door and finishing with Mica sheet and refixing including cost of all materials, labour charges, leads, lifts, etc., complete.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu