SPL REPAIR TO BLDG NO T-05 T-188 AND T-252 AND CERTAIN MINOR WORKS UNDER GE GANGTOK

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m in depth and 1.5 m in wodth for foundation etc and getting out in soft / loose soil complete all as specified and as directed.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m the starting point complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and as directed.

M&L for PCC 1(:4:8) type D-2 (using 40mm graded crushed stone aggregare) as in foundation filling & mass concrete complete all as specified and as directed.

M&L walling of RR stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM (1:6) including brought upto course at interval of every 60cm including laying PVC pipe in weep holes complete all as specified and as directed.

M/L for precast hollow block massonary of (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) exe 10 CM width and setting in CM morter (1:6) etc complete all as specified and as directed.

M&L rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces complete all as specified and as directed.

Material & labour for rendering 20 mm thick in CM (1:4) in two layers of 10mm each (outer layer CM should be added with WPC) on other than fair faces of brick or concrete surfaces, complete all as specified and as directed.

M&L for ceramic coloured tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc. set and jointed in neat cement slurry & pointed in coloured cement to match including 20mm thick screed bed in CM(1:6) complete all as specified and as directed.

Materials and labour for glazed ceramic tiles coloured of size 300 x 200 mm x 7 mm thick fixed on vertical surfaces such as dado etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of screed bed 10mm thick in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.

M&L for preparing surface newly plastered surface for three coat white washing on walls etc complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed .

M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per srl item No 14.00 here-in-above but us 5mm dia and over upto and including 10mm dia in stirrups, specer and binders complete all as specified and as directed.

M&L RCC (Nominal mix) (1:2:4) type B1 (using 20mm graded crushed stone aggr) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M & L for formwork to sides of concrete foundations,plinth beams for rough finished surface of concrete, complete all as specified and as directed.

Sand filling under floor in layers n.exc 25 cm thick including watering, ramming and consolidation etc complete all as specified and as directed.

M&L for 75mm PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregare) as in sub base of floor complete all as specified and as directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) finished and even as in floor complete all as specified and as directed.

S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tub fixing in opening as per specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm th (style) consisting of frame made out of MS tubes for top & bootom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rails on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the stiles & rails with suitable PVC sheet beading & joined together with solvent cement suppling & fixing in the frame at site as specification & drawing complete all as specified and as directed.

S/F Steel ventilator with top hung shutter including hinges ,steel peg stay complete all as specified and as directed.

S/F 3mm thick ,figured glass, pin head type and glazing with oil in square n.exc 0.50 sqm in each panel complete all as specified and as directed.

Supply & fix Mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) including painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and as directed by the Engr-in-Charge.

All as per srl item No 26.00 here-in-above but except sheeting bt including new hooks, nuts bolts etc complete all as specified and as directed.

M&L for 100mm size extruded brass type B-21 butt hinges with Aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and as directed by the Engr-in-Charge.

M&L for 150 mm long aluminimum anodised barrel tower bolt complete all as specified and as directed.

M&L for 125 mm long aluminimum handles cast type, anodised complete all as specified and as directed by the Engr-in-Charge.

M&L for 15 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors complete all as specified and as directed.

M&L for 20 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors complete all as specified and as directed by the Engr-in-Charge.

S/F 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed.

S/F 15 m m fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed.

S&F vitreous china squatting pan "Orrisa patern" size 580 mm x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed by the Engr-in-Charge. Make :- Paryware/Hindware/Cera

S&F for vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and as directed.

S&F for PVC low level flushing cistern of 10 ltrs capacity action type white body with intel ball valve float handle bracket flush pipe etc complete and connecting to WC with PVC flushing pipe complete all as specified and as directed by the Engr-in-Charge. Make :- Paryware/Hindware/Cera

S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix vitreous china, white, flat back half stall urinal of size 420 x 395 x 635mm including CP urinal spreader, 15 mm bore PVC connector pipe, 32 mm bore brass chromium plated waste copling and waste pipe complete all as specified and as directed.

S&F of PVC 'P' or 'S' trap 110mm bore complete all as specified and as directed by the Engr-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by the Engr-in-Charge.

S&F for 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engr-in-Charge.

S&F for 20 mm bore gun metal Gate valve , with oron wheel head, screwed both ends for iron pipoes and etc complete all as specified and as directed.

S&F for vitreous china, white colour, flat back, wash hand basin of approved make and of size 55 x 40 x 79cm fixed with brackets , including providing 32 mm dia PVC waste pipe , 32 mm bore CP waste coupling and making all necessary connections complete all as specified and as directed.

S/ F Soap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screw complete all as specified and as directed.

S/F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engr-in-Charge.

S/F 1000 litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including float valve 20 mm dia complete all as specified and as directed.

M&L for granite 20 mm thick (of any type) work(table rubbed and polished) in steps jambs,pillar,window cill,cooking platform etc complete incl 15 mm thick screed bed in CM (1:6) etc complete all as specified and as directed.

Cutting into existing manholes for connecting new drain making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement mortar (1:2:4) types B-1 (using 20mm graded crushed stone agg) smooh finished and reforming benching are required complete all as specified and as directed.

Material & labour for hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone agg) as in plinth protection, path etc 75 mm thick finishing surfaces even and smooth without using extra cement including construction joints at every 3 m interval and each coner and provition of mastic filling complete all as specified and as directed by the Engr-in-Charge.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone agg) as in surface channel / drains complete all as specified and as directed by the Engr-in-Charge.

M&L for extra for forming fair finished drain or channel 30 cm inner girth cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and as directed by the Engr-in-Charge.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/fixed to walls complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) bends of any radius fixed to PVC Pipe complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends of any radius fixed to PVC Pipe complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) single Tee of any radius fixed to PVC Pipe complete all as specified and as directed.

S&F 110 mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F 110mm PVC (SWR) P or S trap complete all as specified and as directed.

S/F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engr-in-Charge.

M/L Concrete bed to drain pipe of 110m m dia including packing under and haunching against the side or pipe after they are laid and tested in complete all as specified and as directed by the Engr-in-Charge.

Dismantling plain or corrugated sheeting, any gauge, thickness complete all as specified and as directed.

Dismantling of timber in scantling 40 sq cm and over in section in any position in unframed work complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed.

Demolition cement concrete ( un reinforement) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonary built in cement mortar including all quoins, arches, pillars, precast PCC bond stones including separating serviceable stones/boulders & setting aside for reuse in the work and removal of unserviceable materials from site complete all as specified and as directed.

M&L for mild steel rolled sections conforming to Fe - 290 (Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including truss etc complete all as specified and as directed.

M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in as ridge,eaves,facia,valley ,gutter fixed with self tapping screws as in roof complete all as specified and as directed.

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

S&F Mild steel butt hinges 100mm long, medium weight, cold rolled. complete all as specified and as directed.

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised. complete all as specified and as directed.

M&L for autoclave cellular(aerated) concrete block masonry, the size of autoclaved cellular (aerated) concrete block use as specified as per site requirement having compressive strength not less than 5.00 N/Sqm (5.00 Kg/Sqcm) conforming to IS: 2185 (Part-3)-1984, setting in CM(1:6) complete all as specified and directed. Note:- (i) Sampling and testing of AAC concrete blocks shall be carried out in accordance with IS Specification. (iii) Manufacturer certificate to be produced that masonry units conform to the requirements of this specification and IS:2185 (Part-3). (iii) Contractor should produce independent tests certificate of AAC Block from manufacturer before or immediately after delivery.

M&L for 25 mm thick cement concrete (1:2:4) type B-0 (12.50 mm graded crushed stone aggr) as in Damp proof course to horizontal or vertical surfaces including necessary formwork etc complete all as specified and as directed.

M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m etc complete all as specified and as directed.

M&L for preparation of new plaster surfaces and applying priming plastered and other surfaces with alkali resistance pimimg paint and aplying two coats of acrylic oil emulsion distemper on walls complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of cement paint over a coat of suitable primer on new surfaces of walls complete all as specified and as directed.

Material and labour 4mm thick plywood, 5 ply, grade BWR type BB fixed with nails to timber frame work in Wall/Ceiling complete all as specified and complete all as specified and as directed.

Material and labour 6 mm thick plywood, 5 ply, grade BWR type BB fixed with nails to timber frame work in Wall/Ceiling complete all as specified and as directed.

Material and labour for 2nd class hard wood fillets, square, rectangular and triangular in section, wrought, secured with nails,sectional area exe 3 Sqcm but n.exc 6 Sqcm in section complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer .complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded completed all as specified and as directed.

S/F 4 mm thick PVC acrylic sheet,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each panel complete all as specified and as directed.

M&L RCC M-25 (Design Mix) using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Grade -E-250) complete all as specified and as directed.

Demoltion to Concrete of any description and in any position not otherwise specifically provided for (unreinforced) etc complete all as specified and as directed.

Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement & pigment, set, jointed and pointed in neat cement slurry in floors cement laid over and including screed bed/ bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified and as directed.

M&L PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) on in foundation, filling and mass concrete complete all as specified and as directed.

M&L Plain cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) in coping including weathering slightly rounded or chamfered angles and trotting as directed complete all as specified and as directed.

S/F for 3 mm thick Sheet glass,ordinary qualityand glazingwith oil putty in square n exc 0.5 sq. m in each panel complete all as specified and as directed.

M&L for 2nd class hard wood timber scantling fixed clean swan complete all as specified & as directed.

All as per srl item No 96.00 here-in -above but except timber scantling complete all as specified & as directed.

Material & labour for hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed.

Supply and fix .63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275. etc complete all as specified and as directed.

Supply and fixing .63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchs complete all as specified and as directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L for brushing neat cement slurrywith 3.0 Kg of cement per sqm complete all as specified and as directed.

E/M Portion:- Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches ,Sockets, ceiling rose , lamp holder ,tube light fittings and making good distrubed surfaces on walls etc complete all as specified and as directed.

M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC rigid non matellic casing caping (Double lock) with all casing capping fittings & accessories with PVC Box backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and as directed.

All as per srl item No.107.00 here-in-above but for one socket outlet/metal clad socket of 5 Amps fixed on independent board with 1.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 1.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed by Engineer-in-Charge

All as per srl item No 107.00 here-in-above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

All as per srl item No.107.00 here-in-above but for one socket outlet of 15 Amps fixed on independent board with 4 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed by Engineer-in-Charge

All as per srl item No.107.00 here-in-above but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 2.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed by Engineer-in-Charge

S&F switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as specified and as directed by Engineer-in-charge

S&F Switch socket combination, 2 in 1 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and as directed.

S&F Switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and as directed.

S&F Ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified andas directed.

S&F in sheet metal enclosure for 12 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators complete all as specified and as directed.

S&F MCB single pole & neutral 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed

S&F MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed.

S&F Lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as specified and as directed.

Supply and fix in replacement LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09/10W complete all as specified and as directed. Make : Bajaj/Havells/Philips

S&F LED light fitting 1 x 18 W (4 FT), CRI >=80, CT >=5700K, wall / surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with suitable fixing arrangements complete including 01 No 18 W (4 FT) LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make Havells Cat No. LUMILINEPLUSNEOBS18WLED830SPCSSIND

Supply and fixing in repair LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 having 1.5 mtr GI pipe with two coat of painting complete all as specified and as directed by Engineer-in-charge.

S&F water proof 10 watt LED bulk head 1x10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable fo suitable size complete all as specified and as directed by Engr-in-Charge. Make-Crompton cat part No. LBHE-10-WW/ Havells cat part No. HEXAFT 10WLED 657SSYMBOPC/ Philips cat part No. WT202W LED6S NW PSU S2 PC

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'Medium grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print complete all as specified and as directed.

Supply, Laying, jointing & testing in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer in charge of cross sectional area of 25 Sqmm 2 core complete all as specified and as directed.

Supply and laying of DWC pipe,ISI marked in trenches or in cable ducts or fixed on walls using clamps along with all accessories like socket, bend, couplers etc confirming to IS 14930,part-II complete with fitting cutting, jointing etc of size 50 mm outer dia complete all as specified and as directed by Engr-in-Charge

S&F switch socket combination, 5-in-1, 15/16 Amps complete all as specified and as directed.

M&L for concealed sub-main wiring along with earth wire of size of 2 x 4.0 sq mm + 1 x 4.0 sq mm earth wire, ISI marked FRLS,PVC insulated, multi stranded, copper conductor, single core cable drawn through and incl PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for sunken boxes & making good to walls, floors etc complete including taking down old unserviceable one all as specified and as directed.

M&L for concealed sub-main wiring along with earth wire of size of 2 x 6.0 sq mm + 1 x 6.0 sq mm earth wire, ISI marked FRLS,PVC insulated, multi stranded, copper conductor, single core cable drawn through and incl PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for sunken boxes & making good to walls, floors etc complete including taking down old unserviceable one all as specified and as directed.

S&F MCB DB SPN 8 Ways double door, IP-42, IK-09 with metal door, rated bus bars, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed.

Supply and fix in replacement of 10 W LED tubelight fitting with lamp thermal condutive material PC Diffuser, efficiency >100 lm/ W, glare free, THD<10%,Potted electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make-Crompton cat part CCS-103-10-65-SL-DP-NWH/Havells cat part No. LUMILINEPLUSBS10WLED865SPCSSIND/ Philips cat part No. BN 021 LED12S 6500 PSU GR

S&F MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rupturing capacity, 'C' Curve complete all as specified and as directed by Engineer-in-charge.

S&F bore 40 mm pipe galvanized iron medium grade complete with all fittings fixing on wall, jointed tested and commissioned complete all as specified and as directed.

S&F in sheet metal enclosure for 4 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators complete all as specified and as directed.

S&F in replacement 10 W tubelight fitting with lamp, Endura linear LED Wall mounted LED batten with polycarbonate housing & intergated driver for efficient heat dissipation having THD<20% with fitting complete all as specified and as directed. Make-Crompton cat part No. CCS-103-10-65-SL-DP-NWH/ Havells cat part No. LUMILINEPLUSSBS10WLED865SPCSSIND/ Philips cat part No. BN 021 LED12S 6500 PSU GR

S&F of non metalic Ventilating Fans, 200m sweep 900 rpm, AC single phase, 230 volts including louver connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as directed. Make: Havells/Khaitan/Almonard/Bajaj/Crompton Greaves

Supply and laying steel water tubing medium grade galvanised with all fittings such as elbow, union, reducer, tees, bends etc and short length fixed on wall/floor/ceiling of size 25mm bore complete all as specified and as directed.

S&F in repair gun metal gate valve of size 25mm bore with iron wheel head screwed both ends for iron pipe and fixed including taking down old u/s valve complete all as specified and as directed.

Cutting or screwing existing pipe of any insertion of tee of suitable size for branch connection dia complete all as specified and as directed.

S&F rotational moulded polythene water storage tank 500 Ltrs capacity, ISI marked multilayer constraction (cylindrical vertical with closed top) hoisted & fixed in position including supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection and taking dlown old unsv/broken one complete all as specified and as directed.

M&L sub main wiring with 2 runs of 6 sqmm PVC insulated unsehathed coppper cable multistand 1100 V for FRLS grade with drawn in concealed PVC conduit not less than 25mm dia and one run of PVC insulated serviceable of 6 sqmm as earth continuity conductor drawn in casing and capping with accessories complete including taking down old unsv wiring complete all as specified and as directed.

Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated PVC sheathed IS-7098 (Part-I), screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core including cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated PVC sheathed IS-7098 (Part-I), screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core including cable lugs, glands, insulation tape etc complete all as specified and as directed.

KARMA TSETEN BHUTIA (BID ID -3241850)

BIJAY MITTAL (BID ID -3239750)

M/S ANIL KUMAR THAKUR (BID ID -3241244)

DHARMINDER SINGH (BID ID -3243996)

KAMLESH ENTERPRISE (BID ID -3240329)

MAHENDRA KHAWAS (BID ID -3242178)