REPAIR TO DRAIN, PATHS, RETAINING WALL, COMPOUND WALLS, GATES, FENCING, BREAST WALL, PARAPET ETC AT LOWER DAHUNG AND UPPER DAHUNG AREA OF AGE BR I UNDER GE 859 EWS.

Amount

Demolation of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate )as in foundation or bed concrete complete all as specified and directed.

M&L for stone walling built in CM 1:6 in random rubble masonary, uncoursed, well bounded solidlly hearted built in retaining wall, abutment and similar work complete all as specified and directed.

M&L for hand packing with broken stone/ boulder behind backing of retaining wall,in layesr etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping incuding necessary formwork complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in bond stone etc complete all as specified and directed.

M&L for raised pointing to random rubble masonry , uncoursed or brought upto courses in CM 1:4, complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipe in any length with rubber joint laid in trenches or floors, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level),complete all as specified and directed.

M&L for 75 mm thick, PCC 1:3:6 type C-2, (using 40 mm graded stone aggregate) as in path finishing cement concrete surface even and fair without using extra cement spike rolling to surface or making impression of expanded metal, whilst the concrete is green, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6 type C2, (using 40 mm graded stone aggregate) as in surface channels, drains etc.complete all as specified and directed.

M&L for providing precast cement concrete block of PCC (1:3:6) type-C1 in masonry with solid blocks, exceeding 10cm in width & set in cement mortar (1:4) complete all as specified and directed.

M&L for PCC 1:4:8 type C2, (using 40 mm graded stone aggregate) as in parapet ,retaining wall etc complete all as specified and directed.

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces with cement finishing the surfaces even & fair complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation in post holes each n exc 0.5 cum and getting out in hard/dense soil, returning, filling in and ramming earth in layers n exc 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L for providing RCC (1:2:4), type B-1 (using 20 mm graded crushed stone aggregate) as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing average sectional area exc 100 sq cm and n exc 250 sq cm, complete all as specified and directed.

M&L for mild steel TMT bars 6 mm to 8mm dia and over in stirrups, spaces and binders, complete all as specified and directed.

S&F MS Screw bolts 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, embeded in RCC post, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but n. exc 15 cm long, complete all as specified and directed.

S&F Mild Steel Flats 40 x 6 mm thick in wind ties for roof inclduding securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc conforming to Fe-290 Gde E-165, complete all as specified and directed.

Supply only MS galvanised chain link fencing any size or type, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts, etc, including provision of binding wire, complete all as specified and directed.

S&F 10 mm dia bars as stiffening member in fencing including securing the fencing, complete all as specified and directed.

M&L for applying two coat of synthetic enamal paint over a coat of red oxide primer on steel surfaces of any descripition over 10 cm width or girth etc. complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed complete all as specified and directed.

M&L for two coats of white wash including preparation of new concrete surfaces 0f fencing posts etc complete all as specified and directed.

M&L for screed bed or bedding layers 15 mm thick in CM 1:4 for laying floor tiles complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cmx20cmx25cm thick with grey cement and no pigment, set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for Providing, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.

S&F PVC Modular speed breaker with all nacessary fitting, complete all as specified and directed.

S&F retro reflective signage MANDATORY/REGULATORY SIGNS, CAUTIONARY/WARNING SIGNS, INFORMATORY/GUIDE SIGNS as per IRC : 67 made out of high intensity presmatic (HIP) polycarbonate retro reflective sheet having polycarbonate limit as 30% to 50% by weigth and conforming to ASTM 4596 type IV standard. The retro reflective film to be pasted on front side or both side 2mm thick aluminium sheet conforming to IS-737 standard and back side of the board will be having two coats of grey or black synthetic enamel paint complete all as specified and as directed. Make : CMS/3M as approved by GE.

M/S ASHOK CONSTRUCTION

M/S DKT CONSTRUCTION

M/S RARAI ENTERPRISES

M/S R N ENTERPRISES

M/S R D TRADERS

Sikha Traders

M/S SUNRISE CONSTRUCTION AND CO