Rate Contract for Maintenance and Up-keep of Street Lights under the jurisdiction of Electric Division 3rd for the Year 2024-25

Amount

Installation, Testing and Commissioning including loading, unloading and transportation from store to site of 9.0 mtr Long GI (65 micron DFT single dip) octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 175 mm x 70mm & base plate of 275x275x16mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts (J Type) M24x750 mm long (Set of 4 no.’s per pole)

Providing & Laying of RCC foundation for 9.0 mtr. Long Octagonal poles including proper curing. 0.6mX0.6mX1.2m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole).

Providing and Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm

Supply and fixing of Pre fabricate galvanized single way top bracket (1000mm long with 48.3 OD GI Pipe) to be fitted on top of Octogonal pole for holding lighting

Fixing of Pre fabricate galvanized single way top bracket (1000mm long with 48.3 OD GI Pipe) to be fitted on top of Octogonal pole for holding lighting including loading, unloading and transportation from store to site

Supply and fixing of Pre fabricate galvanized two way top bracket with 48.3 OD GI Pipe) to be fitted on top of ST/ Octogonal pole for holding lighting & to give aesthetic look.

Fixing of Pre fabricate galvanized two way top bracket with 48.3 OD GI Pipe) to be fitted on top of ST/ Octogonal pole for holding lighting & to give aesthetic look including loading, unloading and transportation from store to site.

Dismantling of single way top bracket

Dismantling of two way top bracket

Supply, installation, testing and commissioning of DK thermoplastic cable Junction/ Termination T boxes 8"x10"of class IP55/IP65 fitted with two 2-5 Amp MCB strip,4-way terminal block / connectors Incl. copper lugs, Clamps ,nut & bolts washers etc (Hansel or equivalent make) or poles with two way type bracket to be fitted properly inside the door opened gear box provided on the bottom side of the pole.

Installation, testing and commissioning including loading, unloading and transportation from store to site of DK thermoplastic cable Junction/ Termination T boxes 8"x10"of class IP55/IP65 fitted with two 2-5 Amp MCB strip,4-way terminal block / connectors Incl. copper lugs, Clamps ,nut & bolts washers etc (Hansel or equivalent make) or poles with two way type bracket to be fitted properly inside the door opened gear box provided on the bottom side of the pole.

Supply and Fixing of complete fittings of

60 Watt LED Luminaries of IP 67 protection

90 Watt LED Luminaries of IP 67 protection

120 Watt LED Luminaries of IP 67 protection

190 Watt LED Luminaries of IP 67 protection

Fixing of complete fittings of

60 Watt LED Luminaries of IP 67 protection

90 Watt LED Luminaries of IP 67 protection

120 Watt LED Luminaries of IP 67 protection

190 Watt LED Luminaries of IP 67 protection

Supply, installation, Testing & Commissioning of Surge Protector for the LED type lighting fixture complete.

Supply, installation, Testing & Commissioning of PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary indidual circuit including loop & earthings laid properly.

Installation, Testing & Commissioning including loading, unloading and transportation from store to site of PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary indidual circuit including loop & earthings laid properly.

Supply, installation, Testing & Commissioning of HDPE pipe 50 mm O/D and inner Dia 38 mm including trench excavation in hard soil (0.3x0.45x1000m) for laying of 25/16 sq mm Almunium armoured cable . The job further inludes refilling back the same and removal of surplus excavted material to an appropriate place.

Installation, Testing & Commissioning including loading, unloading and transportation from store to site of HDPE pipe 50 mm O/D and inner Dia 38 mm including trench excavation in hard soil (0.3x0.45x1000m) for laying of 25/16 sq mm Almunium armoured cable . The job further inludes refilling back the same and removal of surplus excavted material to an appropriate place.

Supply, installation, Testing & Commissioning of LT 25 mm2 4 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping.

Installation, Testing & Commissioning including loading, unloading and transportation from store to site of LT 25 mm2 4 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping.

Supply, installation, Testing & Commissioning of LT 16 mm2 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping.

Installation, Testing & Commissioning including loading, unloading and transportation from store to site of LT 16 mm2 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping.

Supply, installation, Testing & Commissioning of LT 10 mm2 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping.

Installation, Testing & Commissioning including loading, unloading and transportation from store to site of LT 10 mm2 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping.

Supply, installation, testing and commissioning of astronomical switch of required capacity.

Installation, Testing & Commissioning including loading, unloading and transportation from store to site of astronomical switch of required capacity.

Supply, installation, testing and commissioning of contactor of

18 A, 3 Pole, with aux contact 1 NO, 1 NC

32 A, 3 Pole, with aux contact 1 NO, 1 NC

65 A , 3 Pole, with aux contact 2 NO, 2 NC

65 A , 3 Pole, with aux contact 1 NO, 1 NC

83 A, 3 Pole.

Installation, testing and commissioning of contactor including loading, unloading and transportation from store to site of

18 A, 3 Pole, with aux contact 1 NO, 1 NC

32 A, 3 Pole, with aux contact 1 NO, 1 NC

65 A , 3 Pole, with aux contact 2 NO, 2 NC

65 A , 3 Pole, with aux contact 1 NO, 1 NC

83 A, 3 Pole.

Supply, installation, testing and commissioning of Dust/rain/snow-proof canopy type mini-outdoor LT feeder panel of size 450X300mm with front door opening duly powdered colour coated with inbuilt 2No TPN 16-32 Amp MCCB,TPN busbars of same capacity installed on cement concrete block with 4 angle iron legs grouted in the cement concrete of termination of main 25sqmm cable and outgoing 25/16 sqmm cable circuits.

Installation, testing and commissioning including loading, unloading and transportation from store to site of Dust/rain/snow-proof canopy type mini-outdoor LT feeder panel of size 450X300mm with front door opening duly powdered colour coated with inbuilt 2No TPN 16-32 Amp MCCB,TPN busbars of same capacity installed on cement concrete block with 4 angle iron legs grouted in the cement concrete of termination of main 25sqmm cable and outgoing 25/16 sqmm cable circuits.

Re-alignment of tilted Street Light Pole

Supply, installtion, testing & Commissioning of Single pole MCB

Installation, testing & Commissioning of Single pole MCB including loading, unloading and transportation from store to site of

Supply, Installation, testing and commissioning of input main control TPN MCCB with Bus Bar

Installation, testing and commissioning of input main control TPN MCCB with Bus Bar including loading, unloading and transportation from store to site of

Supply, installation, commissioning and Testing of LT Fuse Set (Customised) for Distribution Transformers as per KPDCL Drawing no. CE/P&P/DRG/2023/LTFS/001 (enclosed)

Installation, commissioning and Testing of LT Fuse Set (Customised) for Distribution Transformers (including loading, unloading and transportation from Divisional store to different sites upto 4 KM-Material to be provided Departmentally)

Supply, fabrication and installation of Transformer Pad/G.I Channel Bedding including GI Pipe/Channels/Braces/ Clamps/Collars of sizes for Substations including frame for LA, GO etc

25 KVA- (250 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

63 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

100 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

Fabrication and installation of Transformer Pad/G.I Channel Bedding including GI Pipe/Channels/Braces/ Clamps/Collars of sizes for Substations including frame for LA, GO etc (including loading, unloading and transportation from Divisional store to different sites upto 4 KM -Material to be provided Departmentally)

25 KVA- (250 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

63 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

100 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars)

Supply,Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 KV, 10 KA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 KV, 10 KA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V) (including loading, unloading and transportation from Divisional store to different sites upto 4 KM -Material to be provided Departmentally)

Supply, Installation, Testing and Commissioning of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V)

Installation, Testing and Commissioning of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V) (including loading, unloading and transportation from Divisional store to different sites upto 4 KM -Material to be provided Departmentally)

Supply, Installation, Testing and Commissioning of 9 Mtr ST Pole ST-410, SP-33 well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5m. Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Installation, Testing and Commissioning (including loading, unloading and transportation upto 4 Km from Divisional store to different sites (including Manual Carriage upto 100 Mtr at site)-Material to be provided Departmentally) of 9 Mtr ST Pole ST-410, SP-33 well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5m.Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply and fixing (including loading, unloading and transportation) of Nuts and Bolts full thread of sizes Galvanized as per IS

Fixing (including loading, unloading and transportation) of Nuts and Bolts full thread of sizes Galvanized as per IS (Material to be Provided Departmentally including loading/unloading/transportation from Divisional stores to different Sites)

Providing and laying of Earthing of Substation---Excavation of earth pit of dia 650mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. GI strip for neutral earthing of size 25mm*3mm for connection of transformer body, G.O Set & lightening Arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials & earth chamber made of brick masonry with RCC slab cover.

Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of Danger Plate With Clamps as per Standards.

Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of GI Barbed Wire.

Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of Anti-Climbing Device with Clamps

Supply and Painting of ST poles with one coat of Red Oxide primer and two coats of Aluminum paint.

Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of 11KV Pin Insulators with Pins (5KN)

Installation, Testing and Commissioning (including loading, unloading and transportation) of 11KV Pin Insulators with Pins (5KN) (Material to be Provided Departmentally including loading/ unloading/ transportation from Divisional stores to different Sites)

Supply, Installation, testing and commissioning of Suspension/Tension Clamp with eye hook

Installation, testing and commissioning of Suspension/Tension Clamp with eye hook (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Providing of material and laying of Cement bottoming of poles 1:2:4 Mix as per REC Standards 0.5 M3 per Pole

Supply, Installation, testing & Commissioning of 33 kV, Lightening Arrestor,(33 kV ,10 kA ,Station class,ZnO, Polymer) gapless

Installation, testing and commissioning of 33 kV, Lightening Arrestor,(33 kV ,10 kA ,Station class,ZnO, Polymer) gapless (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Supply, Installation, testing & Commissioning of 33 kV Isolator, with Earthing Blade (36kV,800 A, Outdoor ,3 poles,25 kA).

Installation, testing and commissioning of 33 kV Isolator, with Earthing Blade (36kV,800 A, Outdoor ,3 poles,25 kA). (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Supply, Installation, testing & Commissioning of 33kV Drop Out Fuse set

Installation, testing and commissioning of 33kV Drop Out Fuse set (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Installation, Testing and Commissioning (including loading, unloading and transportation from Divisional store to different sites -Material to be provided Departmentally)

25 KVA , 11/0.433 KV

63 KVA , 11/0.433 KV

100 KVA , 11/0.433 KV

100 KVA , 33/0.433 KV

Dismantling and Re-erection of Distribution Transformer (including loading, unloading and transportation from one site to different site

25 KVA , 11/0.433 KV

63 KVA , 11/0.433 KV

100 KVA , 11/0.433 KV

100 KVA , 33/0.433 KV

Dismantling of Damaged DT from Site and transportation, Loading and Unloading (Which includes arrangement of crane/sleepers/Trucks etc) to Divisional Workshop and after repairs back to site and re-installation of same

25 KVA , 11/0.433 KV

63 KVA , 11/0.433 KV

100 KVA , 11/0.433 KV

100 KVA , 33/0.433 KV

Installation, Testing and Commissioning (including loading, unloading and transportation from Divisional store to different sites -Material to be provided Departmentally)

25 KVA Servostabiliser

50 KVA Servostabiliser

Dismantling of Damaged Servostabiliser from Site and transportation, Loading and Unloading (Which includes arrangement of crane/sleepers/Trucks etc) to Divisional Workshop and after repairs back to site and re-installation of same

25 KVA Servostabiliser

50 KVA Servostabiliser

Dismantling of damaged street light poles(Sub-Standard) along with Fixtures with carriage (Mechanical/Mannual), Loading at Site and Unloading/Stacking in Divisional Stores.

8 Mtr STP Pole

9 Mtr Octoganal Pole

6 Mtr Octoganal Pole

Providing and laying of Cover Shed & foundation for Servo-Stabilizer including wire mesh fencing around the equipment of size upto 8'x4' made out of wire mesh 1"x1"square including fixing in cement 1:2:4 including welding cutting etc. Complete in all respect

Dismantling of Canopy Fencing of Servo-Transformer & Re-erection of same.

Installation, Testing and commissioning of G.I Pole Collars for different sizes

Supply, Installation, Testing and commissioning of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Installation, Testing and commissioning of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm (including loading, unloading and transportation from Divisional store to different sites -Material to be provided Departmentally)

Supply, Installation, testing and commissioning of 120 mm² AB (HT) Cable (3x120 + 1x95 mm²) XLPE(11 kV, 3C + Earth) on ST/PCC Poles including Lugs/Thimbles/Clamps

Installation, testing and commissioning of 120 mm² AB (HT) Cable (3x120 + 1x95 mm²) XLPE(11 kV, 3C + Earth) on ST/PCC Poles (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Supply and Fixing of Heat Shrinkable Outdoor Cable Termination Kit above 120 to 185 sqmm

Fixing of Heat Shrinkable Outdoor Cable Termination Kit above 120 to 185 sqmm (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Supply and Fixing of Mid Span Straight Through Jointing Kit for 11 kV ABC 120-185mm2

Fixing of Mid Span Straight Through Jointing Kit for 11 kV ABC 120-185mm2 (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

All kinds of soil

Ordinary Rock

Supply and Laying of GI Pipe 150 mm dia with required no of collars

Laying of GI Pipe 150 mm dia with required no of collars (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

RCC protective cover of size 300 mm (width) x 300mm (Length) x 60 mm (Thickness) for underground cables

Brick Masonary Chamber (900x900x1050) mm with RCC top slab, Cast Iron cover in CI Frame (38Kg) after 500 mtrs

Reinstatement of roads

Supply and Fixing of Insulating Piercing Connectors of sizes

Fixing of Piercing Connectors (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally)

Construction of Cement concrete bed 6x4x6 ft above ground in the ratio mix of mix 1:1.5:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering

Centering and shuttering including strutting, propping etc.

M/S QADRI ELECTRICALS

M/S GM ELECTRICALS AND MECHANICAL

HAJRA ELECTRICAL AND MECHANICAL WORKS