REPAIR MAINT TO BROKEN DOOR WINDOW BLDG HARDWARE FALSE CEILING AND CERTAIN OTHER B AND R WORKS

Amount

SCHEDULE A BOQ

Taking down shutters of any description exc 1.0 Sq.m and n.exc 2.0 Sq.m each complete all as specified and directed.

Taking down chowkhat or frame(wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.

Taking down chowkhat or frame(wooden/steel) exceeding 1.50 Sqm but not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.

Resecuring without taking down chowkhats or frames but with shutters (without taking off shutters from the frames) not exc 1.5 sqm each all as specified and as directed.

Resecuring without taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sqm each all as specified and as directed.

M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L Cutting holes in stone wall (exc half brick and n.exc one brick size approx) in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B-1 using 20mm graded stone aggregates as required complete all as specified and as directed.

S&F MS work (flat iron) 25mm x 3mm thick in small articles such as hold fast and similar small articles conforming to Fe 290 Gde E-165 including taking down existing one complete all as specified and as directed.

S&F Flush shutters,30mm thick, solid core construction, with particle board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.

S&F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); all as specified and directed.

Refixing of shutters of any description n.exc 1.0 sqm each, in same opening including taking down, petty repairs etc complete all as specified and directed.

Refixing of shutters of any description exc 1.0 sqm but not exc 2.0 sqm each, in same opening including taking down, petty repairs etc complete all as specified and directed.

M&L 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles not exceeding 200 cu. cm each dismantling all as specified & directed.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section including taking down existing one complete all as specified and directed

S&F 125 mm long aluminium, anodised, barrel tower bolts of extruded section including taking down existing one complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tubecomplete all as specified .

S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified.

Supply and fixing Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete including taking down existing one all as specified and as directed.

S&F in repair Stainless Steel Door Magic Eye with Flap to wooden doors , unique design any type complete all as specified and directed

Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed.

Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, fixed in repair to wooden frame/welded to metal frame all as specified and as directed.

Supply and fixing in repair aluminium anodized hasp and staples safety type with mild steel hinge pin incl bolt to hinge plate fixed with screws of 100mm length complete all as specified and as directed.

M&L Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed.

M&L Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete including taking down existing one all as specified and directed.

Preparation of new wood or wooden surface of any description not othrwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Note for item No 27 :- (a) Paint, shall be of 1st quality manufactured by the standard firms of make as specified.

(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.

(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE.

(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite)

(e) Unless otherwise specified the tints of paint shall be as approved by the GE

(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.

M&L Minor repair to aluminum/glass doors, windows, partitions and making the same fully functional (i.e. Handles, hinges, rubber beadings, clips, rollers etc) including repairing/ cleaning/ greasing etc complete all as specified and directed.

M&L Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat etc. including taking down existing one complete all as specified and directed. Note: Minimum thickness of powder coating 50 micron.

S&F 150 mm long Brass barrel towel bolts, with cast or sheet barrel and rolled or cast bolts and fixed including taking down existing one complete all as specified and directed.

S&F Coloured tinted float glass and glazing, 5.5 mm thick with oil putty in squares not exceeding 0.5 Sq.m in each pane, with glazing clips and oil putty, including taking down existing one complete all as specified and directed.

S&F Powder coated aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each shutter, hinges anodised aluminium snap beading screws etc including taking down existing one complete all as specified and directed. Note:-Glazing and particle board work shall be measured and paid seperately.

S&F 9mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame including taking down existing one complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel covert governing pivot made of brass, other parts made of mild steel heavy duty including taking down existing wire cloth all as specified and directed.

S&F in repairs coloured venetian blinds 100mm wide imported quality to windows vertically hanging self designed with all fittings such as brackets, rollers, pulleys etc complete all as specified. Make: Vista/ Clams/ MAC

Taking down the existing locking system for repairs, contains any number of levers replacing the strucked/damaged levers, applying oil to all parts and making functional properly and refixed in position complete all as specifed and as directed

S&F 5mm thick rubber beading strips of entrance doors having width exc 3CM to not exc 5CM to arrest entry insects including taking down existing one complete all as specified and as directed

Applying silicon sealent on joints of wall,cill jambs roof etc complete all as specified as directed

S&F Pre painted Coloured Galvalume roofing system sheet 0.50 mm thick having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws including dimantling of existing one all complete all as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dimantling of existing one all as directed.

Note for Pre-painted coloured Galvalume roofing :-

(i) The manufacturer's test certificate and individual test certificate for the chemical and mechanical properties of sheet must be submitted for approval by the concerned authority prior to installation.

(ii) The contractor shall ensured that no leakages take place from the roof. The roofing shall be Coloured Galvalume roofing system (olive green colour or as approved by GE) with feed material manufactured from 0.50 mm Total coated thickness (TCT), minimum 550 MPa yield strength and shall conform to the physical specifications of IS: 2062 of 2011, coated with hot dip metallic Aluminium / Zinc alloy coating AZ150 as 150 gm/sq.mt total on both sides.

(iii) The painting shall be coloured baked enamel polyester with silicon coating of film thickness 25 microns nominal on the exposed face/exterior side and on the reverse side ( interior face) shall be white with 15 microns film thickness, over a coat of 5 micron nominal thickness Primer.

Supply & fixed in repair of 12 mm thick ,7 ply, plywood ,grade BWR ,type BB fixed to wooden frame work in wall with nails including taking down all as specified and as directed.

Supply & fixed in repairs of 18mm thick, 7 ply, plywood, grade BWR, type BB fixed to wooden frame work in wall with nails including taking down all as specified.

S&F Decorative laminates of 0.90 mm thick type matt finish, colour and pattern as approved including taking down existing one complete all as specified and as directed.

S&F stainless steel handles of size 150 mm of approved pattern and make suitable for Base/Wall unit of modular kitchen Including taking down the existing one complete (Make : Spykar or equivalent make as per list of makes) all as specified and as directed.

S&F Stainless steel spring hinges of size of approved pattern and make suitable for base/wall unit of modular kitchen Including taking down the existing one complete (Make : BIR SS or equivalent make as per list of makes) all as specified and as directed.

S&F Stainless steel plain basket of size 530 x 505 x 100mm Including taking down the existing one complete. Make : Butterfly or equivalent make all as specified and as directed.

S&F Stainless steel cutlery basket of size 530 x 505 x 100 mm Including taking down the existing one complete Make : Butterfly or equivalent make all as specified and as directed.

S&F Stainless steel thali basket of size 600x 500x 100mm Including taking down the existing one complete all as specified and as directed. Make : Butterfly or equivalent make

S&F Stainless steel bottle basket of size 200x 508x 431mm including taking down complete all as specified and directed. Make : Butterfly or equivalent make.

S&F Stainless steel telescopic slider of 500 mm of approved pattern and make suitable for drawer in base unit of modular kitchen including taking down the existing one complete all as specified.

M&L Second class hard wood plain fillets square or rectangular in section exc 3 Sqcm n.exc 6 Sqcm wrought secure with screws complete including taking down all as specified and as directed.

M&L 18/19mm thick Prelaminated particle board, interior Grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work including taking down complete all as specified and as directed.

M&L 6 mm thick teak wood lipping for 18/19 mm thick particle board fixing with nails complete including taking down all as specified and as directed.

S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed.

S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of brass polished complete including taking down existing one all as specified and as directed.

S&F Continuous (piano) hinges, stainless steel bright finish or electrogalvanised of 40mm width of flaps (when open) complete including taking down all as specified and as directed.

S&F Magnetic catches with 8mm dia steel ball and brass body and striking plate including taking down in complete all as specified and directed.

Supply and Fixing in repairs of brass 4 lever cupboards locks grade I size 65 mm complete all as specified and as directed.

Supply and Fixing brass 4 lever cupboards locks grade I size 65 mm complete all as specified and as directed.

M&L Brick work with fly ash brick using modular bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition and removal of debris out side MD land complete all as specified and as directed.

M&L Rendering 15 mm thick in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed. Note: (a) Water proofing compound shall be measured and paid seperately as supply only. (b) The unit rate quoted is deemed to include for Removing of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protection to outside MD land Note: Periodicity of cutting of grass shall be before commencement of work and after completion of repairs.

Supply only integral water proofing compound complete all as specified and directed. Make ;- Dr. Fixit pidi proof and equivalent.

M&L for applying two coat of cement base paint over one coat of primer including preparation of new plastered surfaces all as specified and as directed.

M&L Granite 18 to 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed. Note : (a) The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar (b) The manufacturer's test certificate and individual test certificate of Tiles must be submitted for approval by the concerned authority prior to installation.

M&L False ceiling using GI snap grid size 60x60cm with main runner 38x24,wall angle & cross tee 29x24mm wall angle 24x24mm suspended with 4mm dia GI Wire fixed with steel dash fasteners carrying max load upto 8.1 Kg/Sqcm with 4mm thick designer ceiling board (Lake & Hill) all as per Everest regular T-2430 or equivalent (Make-Ramco/Charminar/Armstrong). including dismantling of existing one complete all as specified and as directed.

M&L Virified Ceramic tiles 10 mm thick, dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6 complete including dismantling of existing tile and disposal of to outside MD land all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick, dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in for skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer ,10 mm thick in Cement Mortar 1:3 including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Note for item No 77 :- (i) Vitrified tiles are classified under group B1a of the international Standard for ceramic tiles ISO: 13006. Tiles shall be hard, dense, impervious and frost resistant. Water absorption of tiles shall be less than 0.5% and flexural strength (Modulus of Rupture) shall be more than 35 N/Sqmm. (ii) The manufacturer's test certificate and individual test certificate of Tiles must be submitted for approval by the concerned authority prior to installation.

M&L Checking of joinery (wooden/steel) iron/ aluminium monger, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/ nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/ nails, plug etc to make it functional complete all as specified and as directed by Engineer-in-Charge. Note :- In case any replacement of new handles, Butt hinges, cupboard knobs floor door stopper and pelmet box shall be measured and paid under item No 80 to 84 as supply only. However, the unit rate is deemed to be included for labour element.

Supply only wooden pelmet boxes/curtain rods in position by using rawl plugs/wooden gutties fixed with MS holder clips complete incl tightening of screws etc complete in all respect length of each pelmet n exc 2.50 mtr long all as specified and as directed.

Supply only 200mm extruded aluminum alloy handles , fabricated type, anodised all as specified and as directed.

Supply only aluminum handles cast type anodised 150 mm long all as specified and as directed.

Supply only 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed

Supply only 40 mm dia cupboard knobs fixed with nut, screw and washer of brass polished

Supply and Fixing 300 mm mild steel ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and as directed.

Supply and Fixing in repair 300 mm mild steel ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and as directed.

Description all as per sl item No 85 above but welded to metal frame n exc. 2.5 cm in length and n exc 6 mm of metal thickness.

M&L Aluminium body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed including taking existing one complete as directed by Engr-in-charge.

Supply and fixing in repair steel window handles with nuts and bolts or with screws including welding/fixing with nuts complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair steel window peg stay all as specified and directed by Engr-in-charge.

Supply and fixing in repair steel window hinges as per sample by welding all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 0.5 sqm each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area exc 0.5 sqm each pane complete all as specified and directed.

M&L Framed work such as grills , grating ,etc with ends of bars shouldered and or revated for forged in to spike, framed guard bars barred iron doors, ladders, balusters, walk ways raling framed work for water tanks similar work confirming to Fe -290 Gde E-165 complete all as specified and directed.

M&L Two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of surfaces exceeding 10cm width or girth complete all as specified and as directed.

S&F Sun control film 25 micron reflective type, in square n exc 0.5 sqm in each pane including taking down existing one complete all as specified and as directed.

S&F 200mm extruded aluminum alloy handles, fabricated type, anodised including taking down existing one complete all as specified and as directed.

S&F Stainless steel peg set of having 5 pegs powder coated fixed to wall surface with pvc plug and screw complete including taking down all as specified and as directed.

Supply and fixing 25mm dia mild steel powder coated drapery rod out to length required without joint in between and fixed at openings including taking existing one complete as directed by Engr-in-charge.

Supply and fixing Mild steel powder coated brackets for holding the drapory rod and fixed to wall with MS screw including taking existing one complete as directed by Engr-in-charge.

Supply and Fixing in repairs Mild steel powder coated fancy type brackets fixed at both the end of drapery rod of same colour and type of drapaery rod as directed.

S&F 6mm thick frame less bevelled edge mirror fixed with steel stud as per direction of Engineeer-in-charge including taking down all as specified and as directed.

Easing of door shutters for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc, Size of door upto 2 Sqm complete all as specified and directed by Engineer-in-Charge.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments , size of window upto 1.5 Sqm. complete all as specified and directed by Engineer-in-Charge

Providing and injecting chemical for post constructional Anti TermiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and directed.

Taking down MS window shutters n. exe 1.5 sqm through cutting of existing any type of hinges, handle and tower bolt and fixing new box type hinges, MS handle and MS tower bolt the same window by welding. The quoted rates shall be included the following aspect:- (a) Cutting of existing piano hinges, handle and tower bolt from window frame and shutter. (b) Fixing of removed shutter in the same frame on MS box type hinges 100mm, MS handle 100mm and MS tower bolt 100mm by welding. (c) Easing and adjusting the shutter before re-fixing if found required. (d) Finishing the window frame and shutter with two coat of enamel paint. (e) Necessary scaffolding material to be included as the building height is more than 10mtr. Note : Box type hinges, handle and tower bolt will be measured separately as supply only and labour element is deemed to be included in this item.

Supply only MS Box type hinges 50mm.

Supply only MS Handle 100mm.

Supply only MS tower bolt 75mm

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for Figured glass, pinhead type 3 mm thickwith oil putty in squares not exceeding 0.5 Sq. m in each pane, with beads, complete all as specified & directed.

Supply and fixing Butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed.

Supply and fixing in repairs butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed.

Supply and fixing 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminum alloy and fixed complete all as specified and as directed.

Supply and fixing 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.

Supply and fixing 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

P JAYAPATHY & C0

p.chinnasamy

kaarthic builders

KUMAR AGENCIES

A.S Enterprises

D.R ASSOCIATES

sri manikandan enterprises

K S MUTHU CONSTRUCTTIONS