Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹94.1 LAccepted-AOC BANPURA BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹94.7 L+₹64,252.84 (0.68%)Rejected-Finance | L2 | Rejected-Finance Other than L1. | |
| 3 | L3₹95.0 L+₹91,035.09 (0.97%)Rejected-Finance | L3 | Rejected-Finance Other than L1. | |
| 4 | L4₹1 Cr+₹5.9 L (6.27%)Rejected-Finance | L4 | Rejected-Finance Other than L1. | |
| 5 | L5₹1.1 Cr+₹12.3 L (13.1%)Rejected-Finance GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L5 | Rejected-Finance Other than L1. |
Tender Value
₹98.6 L
EMD Value
₹1.7 L
Closing Date
7 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engrs
HQ 134 Wks Engrs PIN-914134 c/o 56 APO
PROVN OF TECHNICAL REPAIR BAY TO CARRYOUT MEDIUM REPAIR TO EQUIPMENT AT 15 CORPS ZONE WKSP AT OAF, SRINAGAR UNDER GE 970 EWS.
2022_MES_566830_1
134 WE-75(T)/2022-23
Open Tender
Civil Works
Item Rate
180 days
Srinagar
9 documents required · 9 mandatory
₹1,000
GE 970 EWS
₹1.7 L
Yes
16 Mar 2023
2 Dec 2022
9 Jan 2023
2 Dec 2022
7 Jan 2023
24 Dec 2022
2 Dec 2022 - 9 Dec 2022
Amount
Excavating over areas, not exc 1.5 mtr deep (above ground level) and getting out in soft/ loose soil, complete all as specified and as directed.
Excavating over areas, exc 1.5 mtr but not exc 3 mtr (above ground level) and getting out in soft/ loose soil, complete all as specified and as directed.
M&L for Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and as directed.
Excavation in trench in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for sewage line, manhole/ drainage etc not exceeding 10 sqm on plan and not exc. 1.5 mtr in depth and getting out in any type of soil, complete all as specified and as directed.
Removing excavated material (soil) exc. 1.50 km but not exc. 5 km and depositing where directed, complete all as specified and as directed.
Removing excavated material exc (soil), exc 250 mtr but not exc. 500 mtr and depositing where directed, complete all as specified and as directed.
Removing excavated material (soil) not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point , complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and as directed.
Moorum / Red Bajari filling in floor or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L sand filling under floors or in foundations including under paver block for cushioning and watering and consolidation complete all as specified and as directed.
M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, complete all as specified and as directed.
M&L RCC M-25 ( 20 mm graded aggregates) (Design Mix) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete, complete all as specified and as directed.
M&L for RCC M-25 (20 mm graded aggregate) (Design mix) as in Columns, pillers, peir, posts, and struts, complete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate, 75 mm thick as in plinth protection/foot path etc, complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete , complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered angles, complete all as specified and directed.
Providing PCC 1:2:4 type B-1 (20mm graded aggregate) in mud stops, rounded or chamfered on edges, complete all as specified and as directed.
M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:6, complete all as specified and as directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bond stone set in CM 1:4, complete all as specified and as directed.
M&L pointing to random or polygonal rubble, uncrushed or brought upto course in CM 1:3, complete all as specified and as directed.
M&L for plastering 15 mm thick in cement mortar 1:4 on Fair Faces of brick wall, cement block wall or on Concrete Surfaces, Surface finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for 12mm thick rendering on brick work or concrete surfaces of internal wall in cement mortar 1:6 surface, complete all as specified and as directed.
M&L preparation of newly plastered surface and apply two coat of cement base paint over coat of wall primer, complete all as specified and as directed.
M&L for preparation on newly plastered surface apply two coats oilbound distemper over coat of wall primer, complete all as specified and as directed.
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded aggregate), 40mm thick as in floor finishs, complete all as specified and as directed.
M&L for 25 mm thick damp proof course to horizontal or vertical surfaces in cement mortar 1:2:4 including necessary formwork, complete all as specified and as directed.
S&F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed. Note :- Whatsoever written in the drg the reinforcement of required dia of MS TMT bar of 500 /500D will only be used at the site.
All as per ser item No 27.00 here-in-before, but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, complete all as specified and as directed. Note :- Whatsoever written in the drg the reinforcement of required dia of MS TMT bar of 500 /500D will only be used at the site.
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, including welding gusset plate, welding at factory or at site fixing over roof beams as per direction of Engr-in-Charge, complete all as spcified and as directed.
S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc confirming to Fe 410-W-(Gde-E-250) Quality-A, complete all as specified and as directed. Note :- Fabrication of roof truss, purlins post, rafter etc cutting, welding, bending, or any other nature of work shall be at site or shop including in above rate.
S&F plates (plain or chequered) channels , square or beams cut or notched (ordinary and counter sunk) forming holes, without any attachments or with rivited, bolted ot welded attachments, etc confirming to Fe 410-W(Gde-E-250) Quality-A, complete all as specified and as directed. Note - cutting to require size and welding or boulting to Beam, post, rafter shall be at site, rate included in this item.
Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical surfaces, complete all as specified and as directed.
Use and waste form work rough finished surface of concrete as in Square, rectangular or polygonal to sides of columns, pillars etc, complete all as specified and as directed.
Use and waste form work to sides and soffits of floor or roof beams, lintel beam, cantilevers, shelves etc, complete all as specified and as directed.
M&L for brick work with sub class 'B' modular brick straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6, complete all as specified and as directed.
M&L for 150mm thick hard core of broken stone/boulder, broken to gauge not exc 63 mm, complete all as specified and as directed.
Forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A, complete all as specified and as directed.
Extra over walling hammer dressing with mix depositing on face from straight edge held against the dressed surface not exc 90mm, complete all as specified and as directed.
M&L for boulder filling dry, handpacked tightly, as in retaining wall, complete all as specified and directed.
S&F plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections confirming to FE - 410 W(Gde E-250) Quality B, complete all as specified and as directed.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to FE - 410 W(Gde E-250) Quality A, complete all as specified and as directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, not exc 30cm long & dia of neck 16 to 20 mm, complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces of any description over 10cm in width and girth, complete all as specified and as directed.
S&F pre-painted galvalum aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength as in roof covering/clading to wall, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering at site, complete all as specified and as dircted.
S&F pre-painted galvalum aluminium zinc coating GI based plain steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength as in roof covering/clading to wall , it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering at site, complete all as specified and as directed.
S&F mild steel bolts of exc 20 and not exc 25 mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long, complete all as specified and as directed.
M&L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4, complete all as specified and as directed.
M&L glazed ceramic tiles in vertical surfaces 350x 250x 7mm/ 450X 350X 7mm thick such as dados, skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in cement mortar 1:4, complete all as specified and as directed.
S&F in vitreous china wash basin (WHB), white, flat back, size 500mmx400mm including CI cantilever brackets, 32 mm dia brass Chromium plated waste fittings with long screw shanks and fly nuts, fixing of tap flange end embedded in red lead cement, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps, complete all as specified and directed.
Extra for forming fair finishing drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/ stopped ends etc, complete all as specified and directed.
M&L for factory made 80mm thick non skid interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 40 Kg/Cm sqm laid over and including 40mm thick dry sand coushoining with grey cement and pigment, complete all as specified and as directed.
M&L for applying evenly a coat of blow type bitumen at the rate of 1.50kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm, complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer, completed all as specified and as directed.
Supply only pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down for 15 mm bore pipe, high pressure with long screwed shanks and fly-nuts, screwed for iron pipe ISI Marked, complete all as specified and as directed.
Supply and fixing POLYTETRA METHYLENE TEREPHTHALATE (PTMT) ENGINEERING THERMOPLASTIC bib taps standard of PTMT any colour screwed, for iron pipe and fixed ( minimum weight 15 mm-90 gms, complete all as specified and as directed.
S&F 15mm dia bore galvanised steel water tubing medium grade with all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
S&F 20mm dia bore galvanised steel water tubing medium grade with all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
S&F 10 litre capacity PVC low level cistern ‘white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long including connecting to WC, complete all as specified and as directed.
S&F Vitreous china wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc, complete all as specified and as directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.
S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.
S&F in towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and as directed.
S&F 110 mm dia bore, PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches, complete all as specified and as directed.
S&F 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches, complete all as specified and as directed.
S&F 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed, complete all as specified and as directed.
S&F 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed, complete all as specified and as directed.
S&F 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed, complete all as specified and as directed.
S&F 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed, complete all as specified and as directed.
S&F 12mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners, complete all as specified and as directed.
S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.
S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms), complete all as specified and as directed.
S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004, complete all as specified and as directed.
S&F on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc, complete for 10 Users With UPFLOW FILTER INLCUDING MEDIA, complete all as specified and as directed.
M&L for cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the 150 mm internal dia of pipe, complete all as specified and as directed.
Supplying, laying, jointing and testing salt glazed stone ware drain pipe of size 150 mm internal dia of pipe grade 'A' confirming to IS-651-1980 laid in trenches and jointed cement mortar 1:1, complete all as specified and as directed.
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed. Refer - Drgs No CESZ/TD-1017/2011.
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed. Refer - Drgs No CESZ/TD-1017/2011.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
M&L for mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/ or riveted, or forged in to spikes, framed guard bars, barred iron doors, ladders; framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.
S&F galvanised steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.
S&F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane, complete all as specified and as directed . Note :- Fixing only rate is included in window/door shutter items considered therein.
Supply only PVC SWR conduit pipes 110mm dia in any length with rubber ring joints laid in trenches or in floor or as in weep holes, complete all as specified and as directed.
M&L for air termination, single pointed, copper rod 12mm dia and 300mm long complete, rigid fixed on top roof height and insulated from base, complete all as specified and as directed.
M&L for test point terminal block made of gun metal or phosphorous bronze size 75 x 75 x 25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex head screw, complete all as specified and directed.
Supply and laying pipe galvanised 'medium class', including fittings 25mm (1") dia, complete all as specified and as directed.
S&F valve gun metal gate/globe valve of size 50mm dia complete including marking joints etc, complete all as specified and directed.
All as per ser item No 88.00 here-in-before, but size 25 mm dia.
M&L for cutting, welding and soldering of existing GI/CI pipe line size 40mm to 50mm dia for inserting tee including necessary joints etc, complete all as specified and as directed.
Lagging to pipes used in water supply or plumbing all round with 25mm thick bonded mineral wool performed SNAPON pipe section of density 144 Kg/Cum conforming to IS 9842 and wire mesh neting 25 gauge, 20mm mesh, complete for 25mm dia GI pipes, complete all as specified and as directed.
S&F stop valves/bib cock, cast copper alloy, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 20mm dia of pipe, complete all as specified and directed.
M&L for 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed, complete all as specified and as directed.
M&L for preaparation surfaces of wood and wood based materials and treated with tar to backs of chowkhats etc. area tarred exc 0.10 sqm but not exceeding 0.50 sqm each, complete all as specified and as directed.
M&L preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhats, etc area tarred not exc 0.1 sqm each with tar or coal tar black paint, complete all as specified and as directed.
S&F 35mm thick 2nd class hard wood plain framed panelled shutter(any number of panels) with panels ot timber flat on both sides (feather edged), or of veenerd pparticle board medium density, wood particle board with commercial face veneers, fixed to chowkats, complete all as specified and as directed.
S&F 35 mm thick, 2nd class hard wood (sal) glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauaze, complete all as specified and as directed.
M&L for preparing new wood or wooden based surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.
S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed.
S&F 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed.
S&F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed, complete all as specified and as directed.
S&F 150mm size aluminium handles cast type, anodised ISI marked, complete all as specified and as directed.
Supplying 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed, complete all as specified and as directed.
M&L for 4mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for fixed in ceiling/wall panelling, flat or sloped surfaces, complete all as specified and as directed.
M&L for second class hardwood plain fillets in square, rectangular or triangular in section, clean sawn, secured with nails or borads exc 6 Sqcm and not exc 13 Sqcm, complete all as specified and as directed.
M&L for point wiring with 1.5 Sqmm copper conductor (Multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade wiring in PVC conduit of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall, covered with 3 mm thick plastic laminated sheet for one light point controlled by one switch, one way, complete all as specified and as directed.
All as per Ser item No 106.00 here-in-before, but for one fan point controlled by one switch/regulator.
All as per Ser item No 106.00 here-in-before, but for one 3 Pin socket outlet 5 Amp on the independent board.
All as per Ser item No 106.00 here-in-before, but for one 3 Pin socket outlet 5 Amp on same board with other switches.
All as per Ser item No 106.00 here-in-before, but for one socket outlet 16 Amp on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and sheathed electric cable 1100 Volt grade including PVC insulated and unsheathed electric cable 1100 volt 2.5 Sqmm copper stranded conductor as continious earth wire connected to common earth dolly, complete all as specified and directed.
M&L for sub main wiring 1100 volts grade, multistrand copper conducors, four runs of single core 10 Sqmm alongwith 10 Sqmm PVC insulated two runs single core multistranded coper conductor cable as earth continuity conductor run alongwith suitable soze of PVC conduit, complete all as directed.
M&L for sub main wiring 1100 volts grade, multistrand copper conducors, four runs of single core 06 Sqmm alongwith 06 Sqmm PVC insulated two runs single core multistranded coper conductor cable as earth continuity conductor run alongwith suitable soze of PVC conduit, complete all as directed.
S&F switch piano, flush type, 5 Amp, one way, complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin and 15 Amp flush type, complete all as specified and directed.
S&F switch socket combination 2 in 1, 5 Amp flush type, complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.
Supply and fixing LED flood light 120 watt 230 Volt AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and as directed.
S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body, complete all as specified and as directed.
S&F stepped type electronic fan regulator flush type, complete all as specified and as directed.
Supply and fixing 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.
Supply and fixing 40 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 40 to 100 Amps poles and current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified and as directed.
S&F MCB DB SPN 8 way double door 240 volts with 200 Amps rated busbar for housing of MCB incoming and MCBs outgoing, complete all as specified and as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and as directed.
S&F bracket made out of GI tubing medium grade 40mm bore, approx length 1.5 mtr long including MS clamps made out of MS flat iron 25 x 6mm, nuts, bolts, washers etc and including before fixing applying two coats of aluminium paint over a coat of red oxide primer, complete all as specifed and as directed.
S&F exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with blades, and frame and louvers complete all as specified and as directed.
S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC), complete all as specifed and as directed.
S&F vertical DB TPN 8 way suitable for MCCB 100 Amps as I/C, double door type 415 volts, IP : 54 protection, door earthing, isolated neutral bar, mechanical impact strength IK 09 with insulated bus bar assembly, complete all as specifed and as directed.
S&F 4 pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, complete all as specifed and as directed.
Earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia as earth lead upto 7.5 mtr long by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3, connected to earthing test point all as specified or indicated including testing on completion including earth work and excavation in any type of soil, PCC 1:3:6 type C-1 chamber, precast slab 40mm thick in cement concrete 1:2:4 type B-1 with 8mm dia MS bars reinforced at 10cm centre to centre both ways including funnel with 20mm bore medium frade GI watering pipe, 15mm bore light grade GI pipe, wire mesh and lugs, including testing on completion, complete all as specified and as directed.
All as per ser item No 130.00 here-in-before, but using galvanised iron strip 32×6mm as earthing lead.
M&L for earth continuity conductor or main earthing lead as copper strip of size 20 x 3.15 fixed on wall or roof and including flexible rigid PVC black pipe, complete insulated as required as 32mm dia or any other indicated situation for loop earthing etc, complete all as specified and as directed.
Supply, laying, testing and commissioning XLPE cable, PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 1100 Volts grade of size 95 sqmm 3.5 core, complete all as specified and as directed.
All as per ser item No 133.00 here-in-before, but cable size 35 Sqmm 3.5 core.
All as per ser item No 133.00 here-in-before, but cable size 16 Sqmm 2 core.
S&F sub class burnt bricks for cable protection, complete all as specified and as directed.
M&L for dry river sand, laid in trenches for cable protection, as 8cm thick below the cable and 15cm thick above the cable, complete all as specified and as directed in para-19.75 of SSR 2009 Part-I. Note :- Punned thickness of sand shall be measured & paid.
Supply, Installation, Testing & Commissioning weather and vermin proof LT feeder pillar box, factory fabricated outdoor cubicle/ kiosk type, CPRI approved and confirming to IS-5036 totally enclosed made out of 3.15mm thick MS sheet size 0.95 x 0.75 x 0.45 mtr back door detachable and frunt side opened type with locking arrangement mounted on 45cm high base frame made of MS angle 40x40x6mm, duly painted and fitted on PCC base 1:3:6 type C-1 using 20mm graded crushed stone aggregate with nuts, bolts, washers and knobs, painted all surfaces internally and externally with two coats of synthetic enamel paint and one coat of red oxide primer complete suitable for 415 volts 50 Hz, 3 phase 04 wire and making all the incoming and outgoing connections and comprising the following accessories :-
(a) MCCB 4 pole 125 Amps 35 KA, 415 Volts - 01 No (Incoming) (b) MCCB 4 Pole 100 Amps 25 KA, 415 Volts - 01 No (outgoing) (c) MCB SPN 40 Amps 230 Volts - 02 Nos (outgoing) (d) Aluminium bus bar sleeve insulated 200 Amp capacity TPN mounted on epoxy insulators-01 set. (e) Digital Voltmeter 0-500 volts range, 96 x 96 sqmm size with in built assembly and CTs- 01 set. (f) Digital Ammeter 0-200 volts range, 96 x 96 sqmm size with in built assembly and CTs- 01 set. (g) LED indicator lamps (RYB) - 01 set. (h) Cable entry glands and two nos earthing terminals.
S&F voltage stabilizer (Servo controlled) for authomatic operation, three phase, nutrally oil cooled, indoor type and desinged for input variation between 340 volt to 460 volts with output voltage stabilizer at 415 with accuracy + 2.5% and speed of correction 8 Volts per second and of capacity 75 KVA, complete all as specified and as directed.
Supply and laying pipe galvanised 'light grade', including fittings 50mm dia, complete all as specified and as directed.
Supply, installation, testing and commissioning of 2 Ton capacity EOT Crane, flame proof electrically operated through pendant push button floor operating type having hoisting height of 5.5 mtr approx double girded box type complete with and including main frame bridge girder/box girder carrieages trolly with frame crab platform on one side of the crane of 750mm outters, gears with gear boxes, shafts, rope drums, rope sneaves, wire rope, wheels, lifting hook, breakes, motors, limit switches, controll panel, pendent push, button statior, micro speed, arrangements, wiring, long travel girder size 300mm and rail size 40mm/Sq bar etc IS-3177, 807, 2148, complete all as specified and as directed by Engr-in-Charge.
Note :- (i) Hoisting height -5.5 to 6.5 mtr. (ii) Max Span 9.00 to 11.00 mtr (clear height 6.00 mtr.) (iii) Rope dia metre 10mm and No of falls min will be 04 falls. (iv) Min gurantee against manufacturing defects will be 12 months from the date of commissioning. (v) Contractor will measure necessary dimensions, i.e span, long travel, height of lift, clearnace between rail centre to the existing column at site before starting of the crane design/manufacturing. (vi) Erection of crane shall be carried out in consultation with the user dept with out causing any hindrance to the existing system, if any at site. (vii) Any items/additional accessories required for safe operation of the crane shall be deemed to be included in the quoted rate.
M/S BASHIR AND SONS
M/S M.A. Construction
SOFI CONSTRUCTIONS
JK BUILDERS AND ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .