SPECIAL REPAIR TO CERTAIN BUILDINGS OF LOGISTIC SECTION AND CERTAIN BR AND EM MINOR WORKS AT SITE P AF STN UNDER GE(AF)THANE

Amount

M&L Surface preparation of structural part by gentle chipping by manually to make the surface rough and thoroughly cleaned with air as per standard practice and directions of Engineer-in -charge (including removal of external debris away from out side of MD Land, tools and tackles, lead and lift etc complete all as specified and as directed by Engr-in-Charge.

M&L for Providing and applying a priming cum bonding coat of two component Epoxide Resin confoms to ASTM-C-882-91 of approved make and quality to clean and sound concrete are by brush or any other established method by mixing Base and curing agent in 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer. Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-Charge etc including necessery scaffolding ,form work etc ,complete all as specified and as directed by Engr-in-Charge.

M&L for Providing and applying 15mm thick polymer mortar to load carrying R.C.C members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement ratio for desire consistency and applying and finishing by floating, curing after initial setting time etc complete (With prior approval of SEMC) etc including necessery scaffolding ,form work etc ,complete all as specified and as directed by Engr-in-Charge.

M&L for Providing & Fixing MS/TS dowel pins/staple/shear pins of Dia 12 mm to 20 mm including drilling holes in concrete upto a depth of 400 mm and providing labour and the materials for grouting the pins etc including necessary scaffolding ,form work etc complete all as specified and as directed by Engr-in-Charge.

M&L for Providing and applying the rust cleaner alkaline in nature to the existing /additional rebars including cleaning the surface by wire-brushing manually or by mechanical tools .etc, complete all as specified and as directed by Engr-in-Charge. Note: Measurment on the basis of area of concrete exposed.

M&L for providing & applying two coat of anti-corrosive epoxy Phenolic rebar protective system IP Net RB or equilant of approved make and quality comprises of resin and hardner mixed in equal proportion by volume with minimum 9-10 hrs between the coats,sprinkling dry and sand when second coat is tacky so as provide rough finish and ensuring air curing of minimum 10hrs after the top coat before any subsequent etc incl scaffolding etc ,complete all as specified and as directed by Engr-in-Charge.

M&L for providing Mild steel TMT round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ,complete all as specified and as directed by Engr-in-Charge.

Ditto as per Srl Item No 7.00 above but for dia 6mm to 8mm.

M&L for Providing & Fixing the formwork to pour the micro-concrete / concrete using steel shutters or 12mm marine ply to have the uniform finish including de-shuttering, etc. ,complete all as specified and as directed by Engr-in-Charge.

M&L for Providing encasement to columns/beams/pardi etc. with free flow high strength non shrink micro concrete M-35 using single component cement micro concrete shrinkage components and added with 100% by weight saturated dry stone dust water cement ratio shall be maintained properly as per manufactures specifications to achieve dense solid mass prepared micro concrete shall be poured properly as per in prefixed holding boards slurry tight form work properly aligned to required size and shape and well oiled air bubbles if any shall be removed by tapping the boards removing the boards after 24 hours and curing the micro concrete thoroughly for 14 days cost inclusive of shuttering curing etc. complete. (Note: Microconcrete mixing with 6mm down size aggregates in the ratio of 1 part micro concrete with 0.3 part of aggregate by weight.)

M&L for Strengthening structural elements with non metallic composite fiber wrapping system comprise of uni-directional carbon fiber sheet (430 GSM) and compatible saturant Profiling: Applying compatible primer on prepared substrate, Filling the holes and uneven surface with thixotropic putty etc. complete Mechanized wetting of fiber sheet: Cutting the fabric to required size. Mixing of saturant and filling in tub area of the saturation machine. Placing the fiber on metallic rods and pass through the rollers of machine and saturant tub ensuring complete wetting (65% fiber volume fraction) of fibers. Remove the fiber on rod and place the new fiber sheet. Wrapping: Wrapping the fiber sheet to structural element at desired orientation using tamping roller to avoid any air voids etc. repeat the same procedure for multiple layer with the interval of 8 hrs. Second Coat: Applying second coat of saturant after min. 12 hrs, rectify air voids if any . (Mode of measurement: Per sq.mt of carbon fiber sheet consumed and not surface area of application)

M&L for Providing and fixing carbon fiber anchor including drilling hole in the base concrete fixing the anchor using epoxy system spreading the anchor fibers in star pattern including application of saturant etc. complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engr-in-charge.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Ditto as per Srl Item No 15.00 above but except tile. Note: Old Serviciable tile retrived from relevent item of Sch 'A' shall be used against this item.

M&L for Non skid ceramic coloured tile 7 to 8 mm thick area of each tile exc 0.06 sqm but not exceeding 0.11sqm in floor set and jointed in neat cement slurry and point in white or coloured cement to match colored tile over 15 mm screed in CM 1:4 complete all as specified and as directed by Engr-in-charge.

M&L Non skid ceramic coloured tile 7 to 8 mm thick area of each tile exc 0.18 sqm but not exceeding 0.38 sqm in floor set and jointed in neat cement slurry and point in white or coloured cement to match colored tile over 15 mm screed in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Demolition of Stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed by Engr-In-Charge.

M&L for Machine cut kota stone slab flooring 25mm thick over 15mm thick 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick 1:3 cement screed and jointed with ditto as complete all as specified and as directed by Engr-in charge.

M&L for Cement concrete type C- 2, 1:3:6, 50mm thick (20mm graded aggregate) complete all as specified and as directed by Engr-in charge

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high glossy finish ,complete all as specified and directed by Engr-In-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:4 (10 mm thick backing coat and 5mm thick finishing coat) on wall fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately) ,complete all as specified and as directed by Engr-in charge.

Rendering 5mm thick (1:3) cement plaster newly plastered surface on ceilling fair faces of brick work or concrete surfaces even and smooth without using extra cement ,complete all as specified and as directed by Engr-in charge.

Rendering 10mm thick (1:6) cement plaster newly plastered surface on wall fair faces of brick work or concrete surfaces even and smooth without using extra cement ,complete all as specified and as directed by Engr-in charge

Supply only Integral water proofing compound ,complete all as specified and as directed.

M&L for preparation of newly plasterd surface of ceilling of concrete or brick surfaces of two coat of white wash over one coat of alkali resistant priming paint ,complete all as specified and as directed by Engr-in charge

M&L for preparation of newly plasterd surface of wall of concrete or brick surfaces of two coat of distemper oil emulsion over a coat of chalk whitening primer complete all as specified and as directed by Engr-in charge

M&L for preparation of newly plasterd surface of concrete or brick surfaces and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M&L for washing,rubbing down and stopping of distempered and painted surfaces of wall and applying two coat of white wash , complete all as specified and as directed by Engr-in charge.

M&L for washing,rubbing down and stopping of distempered and painted on old surface of wall and applying two coat of distumper oil emulsion, complete all as specified and as directed by Engr-in charge

M&L for washing,rubbing down and stopping of distempered and painted on old surface of ceilling and applying two coat of white wash complete all as specified and as directed by Engr-in charge

M&L for washing,rubbing down and stopping of distempered of old painted surfaces of wall and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M&L for Providing and applying plaster of paris putty of 2 mm thickness over new or old plastered surface to prepare the surface even and smooth ,complete all as specified and as directed by Engr-in charge

M&L for preparation of old wooden painted surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint ,complete all as specified and as directed by Engr-in charge.

M&L for preparation of old steel and iron painted surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint,complete all as specified and as directed by Engr-in charge.

Taking up or down steel tubing & connections 15mm, including cleaning for refixing or removal to storage / away from site ,complete all as specified and as directed by Engr-in charge.

Taking up or down steel tubing & connections 20mm, including cleaning for refixing or removal to storage / away from site ,complete all as specified and as directed by Engr-in charge.

Supplying and laying of CPVC pipes (16 mm outer dia) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed by Engr-in charge.

Supplying and laying of CPVC pipes (20mm outer dia) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engr-in charge.

S&F PVC (SWR) pipes, 110 mm dia ,single socketed in any length with rubber ring joints fixed to walls ,complete all as specified as directed by Engr-in charge.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified as directed by Engr-in charge.

S&F in repairs wash down water closet (pedestal pattern) including seat and cover Complete(excluding flushing cistern or flush pipe),complete all as specified as directed by Engr-in charge.

S&F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon ,brackets and flush pipes to pedestal pan, including all joints all as specified and directed by Engr-in-Charge.

S&F in repairs viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings,complete all as specified as directed by Engr-in charge.

S & F in repairs bib taps for 15mm bore dia, CP Brass fancy type long shank with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule ,complete all as specified as directed by Engr-in charge.

M&L PVC(SWR) floor trap for 75mm dia,plain with gratings incl jointing with solvent cement outlet,complete all as specified as directed by Engr-in charge.

S&F Grating doom 10mm dia of PTMT (Minimum weight 25gms) ,complete all as specified as directed by Engr-in charge.

S & F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long ,complete all as specified as directed by Engr-in charge.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq. m each ,complete all as specified as directed by Engr-in charge.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame n exc 1.5 sq. m each ,complete all as specified as directed by Engr-in charge.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints ,complete all as specified as directed by Engr-in charge.

S&F Flush shutters, 40mm thick, solid core construction, with particle board core and plywood face panels, commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match ,complete all as specified as directed by Engr-in charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing,complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodized barrel tower bolt 150 mm long of extruded section ,complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium anodised alloy handles 100mm long fabricated type, ,complete all as specified and directed by Engr-in-Charge.

S&F in repair extruded aluminium anodised alloy handles 150 mm long fabricated type,complete all as specified and directed by Engr-in-Charge.

S&F mild steel Butt hinges of size 100mm, medium weight ,colled rolled ,complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 200mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc ,complete all as specified and directed by Engr-in-Charge.

S&F in repair Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed chromium plate fancy type,complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm Stop valves, fancy type, chromium plated cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper 150mm length of aluminium alloy body and tongue with hard drawn steel spring, complete all as specified and directed by Engr-in-Charge.

S&P Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings,complete all as specified and directed by Engr-in-Charge.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge

S&F for Veneered decorative plywood 6 mm thick , grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber /Aluminium frame work ,complete all as specified and directed by Engr-in-Charge.

M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, rounding of edges ,complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire mesh of 0.36mm dia of wire and average width of aperture 1.40mm & fixed with tinted tacks of galvanised over staples ,complete all as specified and directed by Engr-in-charge.

S&F sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50 Sqm in each pane , complete all as specified and directed by Engr-in-charge.

S&F sheet glass 6.30mm thick, ordinary quality and glazing n.exc 0.50 Sqm in each pane , complete all as specified and directed by Engr-in-charge.

Dismantelling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets ,complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick mineral board fine fissured in true horizontal level of size 600x600 mm as in false ceiling hot dipped galvanised steel section exposed surfeces with precoated capping main centre to centre size 24mm x 32mm having 0.27mm gauge at every 1200mm centre to centre and wall angle of size 19mm x 19mm having 0.35mm gauged fixed to periphery at every 1200mm c/c on both directions using 3mm thick prestrightened GI wire, laying etc ,complete all as specified and directed by Engr-in-Charge.

Removing existing water proofing treatment where so ever exist (exept concrete padding) and removing debris/rubbish off the site ,complete all as specified and directed by Engr-in-Charge.

M&L for opening out cracks, removing the loose material and Filling with Dr Fixit Crack -X shrink free ,complete all as specified and directed by Engr-in-Charge.

Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment for:- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane( having minimum thickness 3 mm) polyester reinforced (4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in soft/loose soil ,complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate ) as in foundation,filling and mass concrete ,complete all as specified and directed by Engr-in-Charge.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 using Fe-410 Gde E-250 ,complete all as specified and directed by Engr-in-Charge.

M&L preparation of newly steel surface of any description over 10cm width or girth not otherwisw described two coat of synthetic enamel paint over a coat of red oxide primer ,complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ,complete all as specified and directed by Engr-In-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ,complete all as specified and directed by Engr-in-Charge.

S&F plates (plain or chequered) channels, Fe-410-W( Gde-E-250) quality A, square cut or notched (ordinary and counter sunk) with riveted, bolted or welded attachment complete all as specified and directed by Engr-in-Charge.

M&L for Chequered cement concrete tiles 20cm x20cm x25mm thick set and jointed with grey cement and pigment pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:4 ,complete all as specified and directed by Engr-in-Charge.

Taking down the steel rolling shutter gear operated rolling shutter n-exc 30 sqm area including adjustment of gear worms assenbely complete each including hood cover and cleaning the sides of shutter suspension and guide shannelks and greasing all the moving parts of rolling shutter shaft and replacement of bolts and nuts as required for smooth functioninig of shutters and refixing the same including hood cover ,complete all as specified and directed by Engr-In-Charge.

S & F in repair in MS hood cover made out of mild steel sheets 1.00mm thick including bending the steel sheets to required shape and fixing the sheet to the rolling shutters bracket plate including one coat of red oxide primer and two coat of aluminium paints ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs of roller ball bearing ISI marked for 40mm dia pipe shaft ,complete all as specified and directed by Engr-In-Charge.

S&F Steel rolling shutters, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type thickness of latch 1.25 mm ,complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel and iron painted surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engr-in charge

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

Material and labour for 75mm thick PCC 1:3:6 type C-2, 1:3:6 (using 40mm graded aggregate) as in pavement/plinth protection the plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen finished fair and even ,complete all as specified and directed by Engr-in-Charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ,complete all as specified and directed by Engr-in-Charge.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engr-in-charge.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with matte finish of approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; as in complete all as specified and as directed by Engr-in-charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles ,complete all as specified and as directed by Engineer-in-Charge.

M&L Pre-cast cement concrete block masonry with solid blocks, exc.10 cm in width and setting in cement mortar 1:6 type-C1 1:3:6 (using 20mm graded stone aggregate) , complete all as specified and as directed by Engineer-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out ,complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, complete all as specified and as directed by Engr-in-charge

S&F mild steel Plates, 6mm thick,(plain or chequered), Fe 410-W (Gde E - 250) quality - A, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment ,complete all as specified and as directed by Engr-in-charge.

M&L for RCC of type B1, 1:2:4, (20 mm graded agreegate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc ,complete all as specified and as directed by Engr-in-charge.

Formwork to soffits of suspended slabs flat rough finished such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M&L for providing 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. ,complete all as specified and as directed by Engr-in-charge.

S&F 25mm thick Plain, framed, panelled shutters of 2nd class hardwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats ,complete all as specified and as directed by Engr-in-charge.

S&F 18mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work ,complete all as specified and as directed by Engr-in-charge.

S&F 75mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 75mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F 75mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 75mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for Preparation of new wood surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick in CM 1:4 as backing coat to receive skirting / dado or tile, complete all as specified and directed by Engr-in-charge.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed by Engineer-in-charge.

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in quoted rate.

Taking down unserviceable main switches and MCB distribution boards single phase ,complete all as specified and as directed by Engr-in-charge

M& L for Point wiring complete with 1100 volts grade FRLS insulated unsheathed cable of copper conductor cable multi stranded of size 1.5 Sqmm single core including PVC rigid concealed conduit medium grade of suitable size (not less than 20mm dia) with all accessories such as bend reducers /MS hooks, MS junction box 1.2mm thick MS pressed sunken terminal boxes of suitable sizes for mounting of switches sockets, fan regulators etc covered with 3.15 mm thick bakelite laminated (Hylem/Anchor) top cover including continuous earth wire of size 1.5 Sqmm PVC strandedcopper conductor unsheathed, insulated stranded (Green colour) connected to common earth point dolly ,complete all as specified and as directed by Engr-in-charge .for the following:-

One light point/call bell point/fan point to be controlled by one number one way PT switch

Switch socket combination 5 Pin 5 Amps 230 Volts point controlled by one switch and wiring with 1.5 Sqmm PVC unsheathed copper conductor cable 1.5 Sqmm PVC insulated earth wire on independent board

All as per Srl Item No 115.00 above but on same board

Switch socket combination (multi purposes) 6 Pin 15 Amps point to be controlled by one switch & wiring with 2.5 Sqmm PVC- unsheathed copper conductor cable 2.5 Sqmm PVC insulated earth wire on independent board.

S&F switch Piano type single pole one way 5 Amp,230 VAC ,complete all as specified and as directed by Engr-in-charge .

S&F socket two in one ,3 Pin 5 Amps 230 VAC ,complete all as specified and as directed by Engr-in-charge .

S&F switch Piano type single pole one way 15 Amp on laminated sheet top cover ,complete all as specified and as directed by Engr-in-charge (Sheet top cover incl in point wiring) .

S&F socket Pinao type 6 Pin 16 amp,230 VAC ,complete all as specified and as directed by Engr-in-charge .

S&F Ceiling rose, two to three terminals with bakalite 20mm back plate,complete all as specified and as directed by Engr-in-charge .

S&F,in repair, fan regulator electronic socket type 5 speed for ceiling fan 1200/1400 mm sweep ,complete all as specified and as directed by Engr-in-charge .

Supply & fixing PVC Lamp holder suitable for and including batten fittings ,CFL/Electric lamp with backalite 20mm back plate ,complete all as specified and as directed by Engr-in-charge .

S&F,in repair, LED tube light fitting,environmental friendly energy efficient ready to use 18/20W LED 6000k(4') ,complete all as specified and as directed by Engr-in-charge .

S&F ,in repair,LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size ,complete all as specified and as directed by Engr-in-charge .

M&L for Earthing,in repair, complete with galvanised steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth of not less than 1.5 mtr below ground level connection to and including 4mm dia (8 SWG) GI earth wire from earth plate to main switch board including necessary GI bolts, nuts, check nuts, washers, thimble etc to the extend 7.5 mtr as earth lead by means of GI bolts & nuts etc, including provision of charcoal and salt 15cm thick all around bottom and top of earth plate as shown in as per electrical plate No 3 of SSR Part-I including PCC 1:3:6 type C2 for earthing pit, GI light grade protection pipe of size 15mm dia ,CI cover and frame necessary earth works and PCC work and water arrangement with GI pipe 20mm dia (medium grade) including excavation and earth work returning , filling, ramming and remove of soil to a distance not exc 50 mtr, make good to match with existing surface and testing on completion .(Note:1.After completion if test results are not satisfied, earthing should be redone by contractor without any extra cost. 2. Contractor quoted rate deemed to be included with testing.3. PCC chamber shall be constructed at least 1.5mtr away from the earth electrod and pipe for watering shall be slanting manner 4.Earth resistance of earth pit should be less than 2 Ohms)

S&F in repair, MCB distribution board double Door of sheet metal TPN 4 way with 200 amps rated bus bar 415 volts ,complete all as specified and as directed by Engineer-in-Charge.

S&F in repair, MCB distribution board double Door of sheet metal Single pole and neutral 8 way with 200 amps rated bus bar 240 volts ,complete all as specified and as directed by Engineer-in-Charge.

S&F MCB ,SPN 240 volt 32/40 Amp ,complete all as specified and as directed by Engineer-in-Charge.

S&F MCB ,TPN 415 volt 63 Amp ,complete all as specified and as directed by Engineer-in-Charge.

S&F,in repair, MCB single Pole 240 Volts 6 to 40 Amp ,complete all as specified and as directed by Engineer-in-Charge.

M&L for sub main wiring,in repair, of the following, PVC insulated unsheathed FRLS copper conductor as mentioned below of similar type cable multistranded copper conductor 1100 volts grade IS:694 marked drawn in and including 25mm dia PVC non metallic PVC conduit , medium grade, ISI marked complete with all acessories and fittings laid/fixed concealed in wall/ceiling or surface conduit on wall/ceiling, and connecting to common earth dolly ,complete all as specified and as directed by Engineer-in-Charge. (Note : Cutting chases for conduit and sinking for boxes and making good to walls ,floors etc for sub main wiring will be measured & paid separately in respective items).

Cable of size 2X4 sq mm and 1X4 sq mm earth continuity conductor

Cable of size 2X6 sq mm and 1X6 sq mm earth continuity conductor

M&L for sub main wiring with two single core 10 Sqmm PVC insulated FR multistranded flexible copper conductor cable 660/1100 volts grade down in through steel conduit with and including PVC insulated 10 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly ,complete all as specified and as directed by Engineer-in-Charge. Note : 1. Two runs of cable and one run of earth wire and one run of Steel conduit will be measured and paid one unit.

S&F triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB ,complete all as specified and as directed by Engineer-in-Charge.

M&L ESE lightining arrester single pointed 15 feet long fixed at roof top with angle iron frame and insulated material with and including PCC(1:2:4) block type B-1 using 20mm graded stone aggregate and block of size 300mmx300mmx300mm ,complete all as specified and as directed by Engineer-in-Charge.( Note:- 1.MS Clamp, pcc shall be measured and paid separtely in subsequent items)

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping of poles etc including weathering, slightly rounded or chamfered angle and throating, necessary form work and fair finishing all exposed faces of concrete without using extra cement ,complete all as specified and as directed by Engineer-in-Charge.

M&L Cross arms, bracings, supports,clamps and back plates fabricatedfrom structural steel sections including nuts, bolts, washers,welding, bending cold or hot,drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint ,complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Test point terminal block made out of gun metal or phosphorous bronze size 75mmX75mmX25mm drilled and screwed including 03 Nos brass 8mm dia 25mm long hexagonal head screw with nuts and washer ,complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing aluminium strip 25mmX3.15mm with saddles& fixing screw etc for roof conductors and down conductors above ground level ,complete all as specified and as directed by Engineer-in-Charge.Note :-Aluminium strip shall not be fixed in direct contact to wall & shall be provided all as specified and directed by Engineer-in-Charge.

Supply and fixing of Epoxy Earthing Strip Insulator, For Electrical Installation, Size: 25 mm X 3 mm every one meter gape from above earth pit to roof of shed ,complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing complete with GI earth plate electrode 60 cm x 60 cm x3.15 mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron strip 20mm x 3mm thick as earth lead by means of bolts, nuts and washers of galvanised iron or steel and thimbles and other end of the earth strip connected to earthing test point/equipment and protected by galvanised iron pipe light grade 40mm dia upto earthing test point/equipment fixed with required Nos of mild steel clamp made out 25mm x 3mm flat iron and perforated water pipe 20mm dia GI medium grade and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in cement concrete (1:2:4) type B-1 and 40mm thick RCC cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Note:- (i) Outer edge of earth pit shall be 1.5 metre away from the outer edge of PCC chamber. (ii) GI strip upto earth test point/equipment is included in this item. (iii) Water pipe shall be provided in slantling position (iv) Earth resistance of earth pit should be less than 2 Ohms)

MSK Everlast Enterprises

Vishal Builders

Vinod Enterprises

Safe Construction Co.

Nissan Electricals