Providing LIS Machada Khad to villages of GP Nirath

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, '"C" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect within all leads and lifts as per the direction of Engineer-in-Charge.

Single Pole. Cat-A

Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required complete in all respect within all leads and lifts as per the direction of Engineer-in-Charge.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect within all leads and lifts as per the direction of Engineer-in-Charge.

Single door-32 Way

Providing and installation of following type of pole mounting LED luminaire with pressure die ast housing with epoxy power coated dark graphite gray colour finish. Prismatic polycaronate cover with individual LED lenses and seprated energy efficient constant current, non-integral, electronic driver, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Great White, Havells, GE, Jaquar, C&S, Panasonic or any other approved by Engineer-in-Charge complete in all respect within all leads and lifts as per the direction of Engineer-in-Charge.

LED Street Light 48 Watt

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required complete in all respect within all leads and lifts as per the direction of Engineer-in-Charge.

40mm dia G.I.pipe Heavy Class

Erection of Galvanized Iron (G.I.) / Steel tubular or Steel rail pole of length 3 to 8 meter but not exceeding 8 meters up to a given depth below G/L The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including excavation and refilling etc. complete in all respects as required complete in all respect within all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying of one No. Copper conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size complete in all respect within all leads and lifts as per the direction of Engineer-in-Charge.

Armoured Cable 10 Sq.mm. 2 Core

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required complete in all respect within all leads and lifts as per the direction of Engineer-in-Charge.

2 X 2.5 Sq. mm

Please Enable Macros to View BoQ information