F.P.Jhirka town- Prov. and installing 4 No. additional tubewells and laying of connecting pipeline. (Estt. Cost Rs 41.05Lacs)

Amount

Drilling of 300 mm dia bore by DTH / Odex ring machine or any other suitable rig percolation any other for telescopic tubewell as per IS code 2800-1991 (Part-II) and IS 1528-1979 (Part-II) as amended up to date in all kinds of soil establizing cost of all cosumable stores, fuel, oil establizing material and transportion and erection of rig and contingent equipement to the site of purposed bore and back complete in all respect. Upto depth of 0 to 150 Mtr. (150x2= 300)

Drilling of 175 mm dia bore by DTH / Odex ring machine or any other suitable rig percolation any other for telescopic tubewell as per IS code 2800-1991 (Part-II) and IS 1528-1979 (Part-II) as amended up to date in all kinds of soil establizing cost of all cosumable stores, fuel, oil establizing material and transportion and erection of rig and contingent equipement to the site of purposed bore and back complete in all respect. Between depth 151 to 225 (75x2=150)

Supplying and lowering blind pipe sze of 219.10mm outer dia ERW steel pipes as per IS 4270/1992 as amended up to date, duly ISI marked for using pipe in 4 to 7 meters random length with 88.90mm of threaded ends (8 threads to an inch or 25.40mm) manufactured out of 6.40 mm thick M.S. plates with required number of M.S. socket 177.80 mm with inside thread to match the pipe threads and made out of M.S. plate in to borehole in vertical position including cost of all scaffolding, derricks, Jim, poles, tools and plants, ropes, M.S. clamp embedded in foundation etc. complete in all respects to the satisfaction of the Engineer-incharge of the work including cost of all utting, threading of pipe where required and all sockets.The pipe shall be painted with anti corrosive paint and covered tightly with polythene. upto depth of 80 Mtr. (80x 2= 160 Mtr.)

Development of T/well according to clause 9.3 of ISI 2800-1991 (Part-1) as amended upto date specification attached and as directeed by the Engineer-in-Charge including of the work including the cost of all consumable stores, fuel, oil compressors, pumps & machinery etc. as required for this work. a) When developed by compressor of the 450 CFM, 250 PSI or of suitable rating 4 * 15 Hrs. (6x2=12)

Supply and fixing well threaded M.S. cap on 219.10mm outerdia ERW housing pipe as per IS: 226-1975, as amended upto date, complete in all respects to the satisfaction of Engineer-in-Charge.

Supply and fixing well threaded M.S. clamap on 219.10mm outerdia ERW housing pipe as per IS: 226-1975, as amended upto date, complete in all respects to the satisfaction of Engineer-in-Charge.

Supplying, erection, testing & commissioning of submersible Horizontal motor pumping set as per BIS Specification No. 8034-1989 complete in all respect 250 LPM 200 Mtr. Head 20 H.P.

P/F of Electric controoled panel board (Box Type) suitable for motar with Main Switch MCB, star delta oil immersed side fully automatic starter, Indicator lamp, capacitor Amp meter voltmeter, 3 Nos. Kit Kats with cable etc. Complete in all respect including carriage loading & unloading to the satisfaction of the Engineer-in-Charge.