SPECIAL REPAIR TO BUILDING NO P-213 (OTM ACCN) AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutter without taking off shutter from the frame exceeding 1.5 Sqm and not exceeding 4 Sqm each and removing from site complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured non-skid ceramic tiles 600 x 600 x 7 to 10mm thick fixed on floors with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Material and labour for glazed ceramic coloured tiles in vertical surfaces 600 x 300 x 7 to 10mm thick, fixed on walls with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge. Notes for Ser Item no 6.00 and 7.00: - The ends of corner tiles at all horizontal and vertical joints shall be mitred/ provided with PVC corner strips whichever found aesthetic and approved by GE at ground, to match the edges properly. There should not be any voids behind the any tiles. The epoxy grout to be filled to a depth equal to half the thickness of tiles. The rates quoted shall be deemed to be all inclusive.

Material and labour for machine cut kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding of open edge, rubbing and polishing complete (mirror face) as in floor/ rasin over 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material outside cantt area complete all as specified and as directed.

Material and labour for 15 mm thick cement plaster in cement mortar (1:4) of external surface with water proofing compound complete all as specified and as directed.

Material and labour for 10 mm thick cement plaster in cement mortar (1:6) of internal surfaces complete all as specified and as directed.

Material and labour for 10 mm thick plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

Supplying and applying two component elastomeric acrylic polymer modified cementitious water proofing coating, Smart care ultra tech Block 2K or approved equivalent, having 220% elongation as per ASTM D 2370, resisting 5 bars hyrostatic pressure as per DIN 1048 reduction to rapid chloride shall be 70 as per DIN 1048 cracks bridging up to 3.5mm as per EN 1062. The coating shall have food grade certificate from laboratories like CFTRI. The making ratio of the coating shall be 2 parts of liquid without any water addition in the mixing etc complete as per manufacturer's specification. Minimum consumption shall be 2 Kg/ Sqm. Supply and applying bond coat application mix AP SC Repair polymer and cement ratio (1:1) brush apply 1 or 2 continuous coat of mix and ensure minimum consumption shall be 02 Kg/ Sqm complete all as specified and as directed.

Taking down galvanised iron tubing of 15 mm dia and connections including cleaning for refixing or removal complete all as specified and as directed.

Supply and fixing 15 mm dia galvanized pipes 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Description all as per Ser item No 15.00 here-in-before but fixing only complete all as specified and as directed.

Taking down galvanised iron tubing of 20 mm dia and connections including cleaning for refixing or removal complete all as specified and as directed.

Supply and fixing 20 mm dia galvanized pipes 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Description all as per Ser item No 18.00 here-in-before but fixing only complete all as specified and as directed.

Material and labour including preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Complete removal of existing treatment of old decorated surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Material and labour including preparation and applying two coats of white wash on ceiling including preparation of old plastered surfaces complete all as specified and as directed.

Material and labour including preparation of surface and applying three coats of white wash on wall including preparation of new plastered surfaces complete all as specified and as directed.

Complete removal of existing treatment of old decorated surfaces of wall and applying two coats of distemper oil emulsion white or tinted including 1mm thick wall care putty complete all as specified and as directed.

Material and labour including preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion white or tinted including 1mm thick wall care putty complete all as specified and as directed.

Material and labour for applying two coats of wheather proof paint exterior grade over one coat of wall care putty including all scaffolding arrangement upto four storeyed building complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Taking down door and refixing shutters after making necessary repair of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed. Note: - Builders hardware used in repairs shall be measured separately.

Supply and fixing factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25x25x3mm angle iron projecting 10cm on either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Description all as per Ser item No 29.00 here-in-before but frame size 105 x 60mm complete all as specified and as directed.

Supply and fixing 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part-I section 8, clause 8.24(a) complete all as specified and as directed.

Supply and fixing factory made second class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated 35mm thick complete all as specified and as directed by Engineer-in Charge.

Supply and fixing 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing aluminium alloy, anodised, sliding door bolt size - 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing helical door spring 200mm including roller and roller plate complete fixed with welding to existing steel chowkhats complete all as specified and as directed.

Supply and fixing 150mm long aluminium handle extruded alloy, fabricated 'D' type anodised complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square pane complete all as specified and as directed.

Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick mild steel sheet tube factory made with double side shutters wire gauged shutter and glass glazed shutter (wire cloth and glass panes will be measured and paid separately) with side hung shutters with mild steel handles and mild steel peg stay dovetailed or welded including 02 No's mild steel tower bolts 150 mm long for each leaf and 08 mm square bar grill/ guard bars at spacing as shown on drawing welded mild steel flat iron frame work, including other fittings, hinges, mild steel handles, tarred hold fasts, PCC blocks for hold fasts etc all as shown on drawing No CEPZ/TD-354/09 sheet 1/3 to 3/3 including one coat of red oxide zinc primer complete all as specified and as directed.

Supply and fixing box type steel ventilator comprised of tubular frame and shutters made out of 1.25 mm thick mild steel sheet tube factory made with fixed type wire gauged shutter (wire cloth and glass panes will be measured and paid separately) with side hung shutters with mild steel handles and mild steel peg stay dovetailed or welded including 02 no's mild steel tower bolts 150 mm long for each leaf and 08 mm square bar grill/ guard bars at spacing as shown on drawing welded mild steel flat iron frame work, including other fittings, hinges, mild steel handles, tarred hold fasts, PCC blocks for hold fasts etc. complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

Supply and fixing galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails/ wooden beading/ steel staple complete all as specified and as directed.

Supply and fixing mild steel powder coated colour decorative type drapery rod of 20mm dia approved pattern and design including decorative knobs (02 x No for each opening) and powder coated mild steel flat iron brackets fixed with steel screws and PVC rawl plugs/ grips complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on existing wooden surface including preparation of old surface of any description over 10 cm width or girth complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Supply and fixing factory made solid moulded prelaminated PVC door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge complete all as specified and as directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing aluminium alloy, anodised, sliding door bolt size - 200 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing vitreous china squatting pan 'Orissa' pattern size 580x440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe, etc. complete making good to floor as existing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern water closet {excluding flushing cistern and flush pipe}) including fixing bolts, connection to drain (or outgoing pipe) and to flushing pipe, etc. and fixing of seat cover complete fixed complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash hand basin white, oval shape of size 580x400mm with PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends brackets and provision of GI waste pipe 32mm (Light grade) of adequate size and length, brass chromium plated waste coupling 32mm dia, cast copper alloy chromium plated angle valve 15 mm dia bore, 15mm dia chromium plated pillar tap fixing and taking down unserviceable wash hand basin complete all as specified and as directed.

Supply and fixing in repair vitreous china urinals bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe including PVC waste pipe 32mm of suitable length, PTMT waste coupling 32mm dia suitable for urinals, PVC connection 15 x 450mm long, chromium plated urinal spreader, 15 mm angle valve fancy type chromium plated complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs 10 litre capacity low level flushing cistern, with inlet float valve, moulded from virgin polypropylene single flush including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and as directed.

Supply and fixing PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Supply and fixing tubular towel rail, 20mm dia, 'D' type and 60cm long between flanges of brass chromium plated complete all as specified and as directed.

Supply and fixing chromium plated grating doom 100mm dia including embedding in tiles with white cement complete all as specified and as directed. (Minimum weight 25 grams).

Supply and fixing in repairs stop valves cast copper alloy 15 mm dia, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed.

Supply and fixing in repairs 15 mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete all as specified and as directed.

Supply and fixing in repairs bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and as directed.

Supply and fixing in repair jet spray with 1.00 m tube complete all as specified and as directed.

Supply and fixing in repair chromium plated brass health faucet with 1.0 metre tube and hook (braided tube) complete all as specified and as directed. Makes: - Prayag 'Droplets' pattern cat part No BEA-85 or equivalent in Jaquar, Kohler.

Supply and fixing in repairs grating doom 100mm dia of PTMT with holes (minimum weight 25 grams) complete all as specified and as directed.

Supply and fixing in repairs for toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws box type complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for granite 15 to 18 mm thick (Pure black) (table rubbed and polished) as in steps, jambs, pillars, window cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed in cement mortar (1:4) edges of slab to be rounded from all sides (including cutting and polishing) complete all as specified and as directed.

Supply and fixing in repair cast iron 100 mm dia bore pipe, branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing in repair cast iron 75 mm dia bore pipe, branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing in repair cast iron 100 mm dia bore pipe, branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing in repair cast iron 75 mm dia bore pipe, branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing in repair 100 mm dia cast iron soil, waste and vent pipes, (sand cast pipes) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing in repair 75 mm dia cast iron soil, waste and vent pipes, (sand cast pipes) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing in repair 100 mm dia cast iron soil, waste and vent pipes, (sand cast pipes) in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

Supply and fixing in repair 75 mm dia cast iron soil, waste and vent pipes, (sand cast pipes) in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

Supply and fixing in repairs 110 mm dia PVC (SWR) 'P’ trap complete all as specified and as directed.

Supply and fixing in repairs 110 mm dia PVC (SWR) 'S’ trap complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in any thickness ground floors and pavings (below or above ground level) and removing from site complete all as specified and as directed.

Material and labour for cement concrete (1:5:10) (using 40 mm size coarse aggregate) as in mass filling in sunken floor of toilets complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement sand mortar (1:4) mixed with and including liquid integral water proofing compound 0.20 litre per 50 kg bag of cement both on floor and wall after proper curing and drying and apply Epoxy resins coating polymer modified cementation coating like brush bond of Fosroc Pidilite and Bostic as per manufacturer's instructions both on floor as well as on walls of sunken floors complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid integral water proofing compound complete all as specified and as directed.

Dismantling water tanks and removing to store exceeding 500 and not exceeding 1000 litres complete all as specified and as directed.

Supply and fixing 1000 litres PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 100mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3m in length, finished fair and even complete all as specified and as directed.

E/M Portion: - Taking down old unserviceable copper/ aluminium point wiring concealed/ batten (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden/ iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour for complete point wiring with 1.5 Sqmm single core multistranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall, plastering after concealing conduit including modular galvanised flush boxes of suitable size and white cover plate with frame suitable modules as per relevant IS for mounting modular switches, sockets, fan regulators etc and including making good the disturbed surface as per existing complete all as specified and as directed by Engineer-in-Charge for the following: -

Description all as per Ser item No 90.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board complete all as specified and as directed.

Description all as per Ser item No 90.00 here-in-before but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and as directed.

Description all as per Ser item no 90.00 here-in-before but for one light point controlled by two 2-way switches, with cables 1.5 Sqmm size complete all as specified and as directed.

Description all as per Ser item No 90.00 here-in-before but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable complete all as specified and as directed.

Supply and fixing modular switch 1 way 6 A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing modular socket 6A/ 16A - 6 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing modular socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing modular switch socket combination 16 A, 6 pin, 3 module complete all as specified and as directed.

Supply and fixing in replacement ceiling rose, 3 Phase/ PVC/ polycarbonate isolated body complete all as specified and as directed.

Supply and fixing modular fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and as directed.

Material and labour in replacement for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour in replacement self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1 x 20W, 220 V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

Supply and fixing in replacement LED light fitting 1 x 9 W/ 1 x 10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single phase, 230 V of size 300mm sweep with blades and frame and louvers including taking down old one and deposited to MES Store. Making holes for 300 mm exhaust fan of suitable shape and size into or through brick walls including plastering for making good to the original surfaces of any description disturbed including painting / distemper matching with the existing colour including taking down old one and deposited to MES Store complete all as specified and as directed. Note: - The rates includes for making good to the original surfaces of any description disturbed including painting/ distemper matching with the existing colour.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement SPN 40 amp to 63 Amp rating 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Material and labour for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 precast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete power factor >0.95, 100 lumen/watt, CCT min 5700K complete all as specified and as directed.

Supply and laying XLPE insulated armoured 16 Sqmm 4 core heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for laying of L/T underground cable/ laying of GI pipe and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

Removal of excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Supply and laying including replacement of dry bricks over cable as mechanical protection laid flat with width equal to length of brick with sub class 'B' bricks complete all as specified and as directed.

Material and labour in repair for galvanised iron pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 50 mm dia complete all as specified and as directed.

Supply and laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trenches complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with superior glass line coated tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece and with hot and cold PVC (SWR) pipes any length with rubber ring joints fixed to walls with rawl plug and all accessories etc complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, suitable for working on electronic fan regulator and accessories, 230 V, 1200 mm sweep minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) only BLDC FAN complete all as specified and as directed.

Taking down fans including sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and as directed.

Supply and fixing in repair angle valves chromium plated screwed both ends for 15mm bore of iron pipe or for union and fixed each complete all as specified and as directed.

Supply and fixing bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

Supply and fixing 25 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

Supply and fixing in repairs of Vertical Distribution Board (TP&N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and outgoing MCB's and should be IP-43 protected with copper bus bars, neutral links, earthing bar complete all as specified and as directed including taking down old unserviceable distribution board/ MCB any type. Notes: - (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) MCB's shall be measured and paid separately. (iii) TPN distribution board and MCCB should be of same make.

Supply and fixing gun metal, globe or gate valves, 25mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fixing modular switch 2 way, 10 A, 1 module complete all as specified and as directed.

M/S Sukhmani Construction Co. (BID ID -3266053)

M/S VED PAUL MAHAJAN (BID ID -3265380)

M/S RAVINDER SINGH (BID ID -3266646)

M/S TRIKUTA BUILDERS (BID ID -3266447)