ECHP-II- Dismantling of 300 mtrs. SH Belt at Conveyor-67 and erection of 300 mtrs. SH belt at 1800mm BW, 5Ply, 5 3, 1800 KN N Nylon Nylon for Conveyor-70.

Drawal and loading of SH Conveyor belt about 300 meters in belt drum from con 67 coal jetty -II to conveyor 70 tail end area transporting and unloading at conveyor - take up area including T&P hire charges and cost of consumables.

Charges for unloading counter weight from counter weight 30-40 ton capacity box arranging chain block and belt clamps, lifting counter weight box to the required level and after completion of belt joint work, releasing the counter weight box loading the counter weight in all conveyors. (For higher counter weight capacity and take-up tower height)

Assembling of 1st belt drum stand with necessary supports and stiffness providing at conveyor take up area and unloading the first drum in the stand.

Assembling of 2nd belt drum stand with necessary supports and stiffness providing at conveyor take up area and unloading the first drum in the stand.

Transporting the belt clamps, chain blocks and special tools and spanners to workspot and return back after completion of work.

Dismantling the fluid coupling end disc coupling springs by releasing all bolts & nuts in primary and secondary drives including T&P hire charges and cost of consumables.

Uncoiling the 2 belt drum 300 mtrs belt and laying the belt about 300 meters by using chain block & pull lift arrangements and pulling the belt through wire rope in step by step manner inspecting very wire rope sliding points and conveyor belts for 1800 mm width belt and including T&P hire charges and cost of consumables.

Charges for removing the carrying and return idlers with frames and refixing the same after completion of work and including T&P hire charges and cost of consumables.

Charges for making preliminary arrangements for providing 1st belt joint and assisting the belt joint works and other allied works and including T&P hire charges and cost of consumables.

Making preliminary arrangements for 2nd & 3rd & 4th belt joint and assisting the belt joint work and other allied works and including T&P hire charges and cost of consumables.

Arresting the belt after laying by using belt arresting clamps at 4 locations and allied Works.

Assembling the fluid coupling disc and cover with coupling springs and tightening all bolts and lubricating the springs and including T&P hire charges and cost of consumables.

Trail running the conveyor on no load and load condition to check the movement of counter weight, belt sway and carrying the belt tracking work including T&P hire charges and cost of consumables.

Charges for providing cold vulcanizing joint in 1800mm width conveyor belt including cost of vulcanizing materials hire charges for T&P'S cost of consumables etc complete.

S.GOPALA KRISHNAN CONTRACTOR (BID ID -1093463)