COMPREHENSIVE MAINTENANCE OF INTERNAL ELECTRIFICATION AND CONNECTED ITEMS AT AIR FORCE STATION PATHANKOT

Amount

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.3mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 5 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. (i) Main earthing lead from earth plate electrode to test point upto length of 7.5 meters length shall deem to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 metre shall be measured and paid for seperately under appropriate item of Sch A part-IV (Sec-I) . (iii) On testing after completion if the desired resistenance is not obtained the contrator shall redo the earthing without any extra cost to the department .

Supply and fixing in replacement LED avaiation light luminaires ,integral LED aviation light comprising of aluminium housing with polycarbonate enclosure including connecting electricaly to existing location using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required complete all as specified and directed by Engr-in-Charge.

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside regulators/ light fitting/ MCBs serviceable/ unserviceable items for reuse with in the same bldg or deposited to MES store yard complete all as specified and directed by Engr-in-Charge.

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit Medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engr-in-Charge.

All as per srl item No-4 above but in existing conduit existing & CI/MS sunk boxes

All as per srl item No-4 above but for one light point controlled by 2 nos two way switches.

All as per srl item No-6 above but in existing conduit & CI/MS sunk boxes.

All as per srl item No-4 here in before above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduit.

All as per srl item No-8 above but in existing conduit & CI/MS sunk boxes

All as per srl item No-9 above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No-10 above but in existing conduit & CI/MS sunk boxes

All as per srl item No-4 here in before above but for one 5A socket outlet on the same board controlled by one switch.

Submain wiring with two single core FRLS insulated flexible copper conductor cable of sze 4 sqmm and one single core PVC FRLS insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed by Engr-in-Charge.

All as per srl item No-13 above but in existing conduit & CI/MS sunk boxes complete all as specified and directed by Engr-in-Charge.

Submain wiring with two single core FRLS insulated flexible copper conductor cable of sze 6 sqmm and one single core PVC FRLS insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or complete all as specified and directed by Engr-in-Charge.

All as per srl item No-15 above but in existing conduit & CI/MS sunk boxes complete all as specified and directed by Engr-in-Charge.

Supply and fixing of PVC medium grade 20 mm conduit incl complete fitting and fixture i.e. bend , elebow, suitable for fixing arrangement all complete all as specified and directed by Engr-in-Charge.

Supply and fixing of PVC medium grade 25 mm conduit incl complete fitting and fixture i.e. bend , elebow, suitable for fixing arrangement all as specified and directed by Engr In Charge.

S&F in replacement LED box type fitting pre-wired for LED tube with enegry efficient LED tube extruded aluminium heat sink & high efficiency diffuser 4 Ft version for 16/20 Watts, including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required all as specified and directed by Engineer-in-Charge

Supply and fix Recess mounted LED fitting with high transmittance polycarbonate diffuser 36 watt fit to 600x600 mm modular/pop/gypsum ceilling complete with including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required all as specified and directed by Engineer-in-Charge

Supply and fixing energy saving new generation 10 W LED bulk head luminaire with opal diffuser watt suitable for 10 W LED 6000K complete with LED lamp including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required all as specified and directed by Engineer-in-Charge

Supply & fixing and Testing TPN DB (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DB's IK-09 flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including MCCB 100 Amps,ICs=100%ICu, 25KA four pole as in comer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Eng-in-charge including taking out old unserviceable DB and removing from site. (Note :- MCBs shall be measured and paid separately)

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 230 Volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification all as specified and directed by Engineer-in-Charge

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 230 Volts 4 way, including suitable size copper bus bar and neutral link multi-9 fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification all as specified and directed by Engineer-in-Charge

Supply and replacement MCB single pole 230 Volts any rating from 5 to 30 amps, with rupturing capacity 10 KA,including providing thimble for out going cables all as specified and directed by Engineer-in-Charge

Supply and replacement MCB SPN 230 Volts any rating from 5 to 30 amps, with rupturing capacity 10 KA, including providing thimble for out going cables all as specified and directed by Engineer-in-Charge

Supply and replacement MCB three/four pole 415 volts any rating up to 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables all as specified and directed by Engineer-in-Charge

S & F sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 230 Volts, complete with one single pole MCB of 20 amps earthing all as specified and directed by Engineer-in-Charge

Supply and fix Capacitor AC 415 volts 3.15 mfd 50 Hz complete all as specified and directed by Engineer-in-Charge.

Supply and fix Capacitor AC 415 volts 2.5 mfd 50 Hz complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminiuim conductor multistranded of size 10 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in twin core cable flat or circular complete all as specified by the Engineer in charge.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminiuim conductor multistranded of size 16 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in twin core cable flat or circular complete all as specified by the Engineer in charge.

Carrying out comprehensive maintenance of day to day for domestic area (For No. 1 area) internal eletrification complaines by Collection from complaint cell daily between 9.00 am to 10.00 am and Repair in situ or attending of complaints of domestic area after rectifying complaines job card will be return on same date. Defects of the items such as switches, fuse wires, DB, MCB (light/ power), lamp holder (bracket, pandent, batten) bell/buzzer, push button, ceiling rose, capacitors and other similar electrical items/fittings, repairing of geysers/ solar heater system etc including providing of small pieces of electrical wire of size 1.5 sqmm to 10 sqmm single core/ two core and length not exceding 1.5 mtrs complete all as specified and directed by Engineer-in-Charge (Note :- (i) any accessories as mentioned above found unserviceable shall be replaced under respective items of this Sch. seperately. However any minor requirement essential for making overall system serviceable is deemed to be included in the quoted rate of this item. Note:- i) Contractor shall provide his authorised Cell/mobile No. and local address to contact and communicate the message for any break down/ Complaint received on Cell phone and contractor's rep will visit the office twice a day (0930 Hrs and 1430 Hrs) to collect the day to day complaints of any nature/type. (ii) Penalty for not rectifying the defect in time(within 72 hrs) will be charged to contractor and the amount of penalty @ Rs 1000/- per complaint will deducted from the due payment of contract. (iii) Manpower requirement for attending and completing day to day complaints will be depending upon the number of complaints which may vary day to day and cost of same is deemed to be included in quoted rate. Contractor is advised to quote accordingly. (iv) Complaints will be treated as rectified only after user's "Satisfactory slip "will be produced by contractor to concerned JE E/M/Rep of MES. (v) Old material obtained from replaced items under this item shall be contractor's property and will be measured as per Schedule of credit. (vi) Cost of minor spares i.e, insulation tape, lugs, thimbles etc are deemed to be included in the quoted rate. Labour required to carryout the maint / repairs for all repairs including testing and commissioning shall be deemed to be included in item rate as quoted by the contractor.Items replaced shall be measured and paid seperately . (vii) Cost of T&P i.e, ladders, tools, brazing, welding, soldering required and transportation is deemed to be included in quoted rates. (viii) Making good the area / cleaning the area will be mandatory for the contractor & failing which penalty of Rs. 5000/- will be charged at each up stance

All as per item No. 33 here in before above but for No. 2& 3 area

All as per item No. 33 here in before above but for technical area

M & L for the following items 36.00 to 36.50 in replacement if required against Sr item No.33, 34 and 35 PVC Wire single core multi strnderd FRLS of size 1.5 sq mm

PVC Wire single core multi strnderd FRLS of size 2.5 sq mm

PVC Wire single core multi strnderd FRLS of size 4.0 sq mm

PVC Wire single core multi strnderd FRLS of size 6 sq mm

Switch piano flush button single pole one way 5 amps 230 volts

Switch piano flush button single pole one way 15 amps 230 Volts

Switch piano flush button single pole two way 5 amps 230 volts complete

Socket 5 amps 5 pin flush type, 230 volts

Socket 15 amps 3/5 pin flush type, 230 volts

Lamp holder insulated body with back plate for batten fittings

Ceiling rose surface bakelite 3 terminals

Bell ding dong type 230 volts single pole

Choke electronic 36 watts 230 volts

Choke electronic 28 watts 230 volts with plastic housing

Heavy duty vaccum pressure impergenated copper ballast (VPIT) for CFL 9/10/11 watts

Heavy duty vaccum pressure impergenated copper ballast (VPIT) for CFL 14/18 watts

Heavy duty vaccum pressure impergenated copper ballast (VPIT) for CFL 36 watts

Compact fluorescent lamp 9/10/11 watts 230 volts 6500 K, 2 pin

Compact fluorescent lamp 18 watts 230 volts 6500 K, 2 pin

Compact fluorescent lamp 36 watts 230 volts 6500 K, 2 pin

Tube rod 4' x 36/40 Watt 230 Volts

Tube rod 4' x 28 Watt 230 Volts

CFL lamp any type upto 18 watts

Lamp holder suitable for CFL lamp any type upto 36 watts

Spring loaded rotary type bipin holder suitable for tube light fittings

Starter AC 230 Volts suitable for fluorescent tube light fittings

Fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100%

Plug top 3 pin 5 amps AC 230 Volts

Plug top 3 pin 16 amps AC 230 Volts

Cord flexible PVC insulated and over all sheathed, 3 core, flexible copper conductor of size 1.50 sqmm, cut to size all as required at site

Plastic laminated top sheet cover 3 mm thick of size 5"x5" all as required at site including cutting for fixing the existing switches, sockets, fan regulators & drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box.

Plastic laminated top sheet cover 3 mm thick of size 8"x5" all as required at site including cutting for fixing the existing switches, sockets, fan regulators & drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box.

Plastic laminated top sheet cover 3 mm thick of size 11"x9" all as required at site including cutting for fixing the existing switches, sockets, fan regulators & drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box.

Plastic laminated top sheet cover 3 mm thick of size 13"x11" all as required at site including cutting for fixing the existing switches, sockets, fan regulators & drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box.

Modular type switch 6 Amp one module

Modular type switch 16 Amp one module

Modular type Socket 6 Amp two module

Modular type Socket 16 Amp two module

Modular type fan regulator 6 Amp two module step type

Modular type bell push 6 Amp one module

Pinno type bell push 5 Amp

M&L inreplacement for point wiring with 1.5 sqmm 1100 volts grade Unilay-FRLS insulated copper conductor single core multi strand flexible cable in and including ERW rigid steel conduit fittings and accessories including flame proof bends,couplers, junction boxes etc fixed on wall/ceiling with proper fixing arrangements incl copper conductor 1.5 sqmm PVC insulated unsheathed multistranded copper conductor single core cable (green color) as earth lead continuity conductor fixed to earth terminal and matellic body of light fittings complete all as suitable fir class II Zone IE IIA for one light point controlled by one way switch.

All as per srl item No 37 above but in existing conduit existing & CI/MS sunk boxes

All as per Srl item No-37 above but for 3 pin 15 Amps socket with 2.5 sqmm.

All as per srl item No- 39 above but in existing conduit existing & CI/MS sunk boxes

Suuply and fixing explosion proof rotary switch, single pole ON/OFF with cable termination box of 16 Amps rating 250 Volts class E Ex I C suitable for class 1, Zone 2 complete all as specified and directed by Engineer-in-Charge

Supply and fixing inreplacement for flame proof switch socket and plug combind in LM6 cable termination box in LM6 , 16A, 250V,2P+Earth complete all as specified and directed by Engineer-in-Charge

Supply and fixing inreplacement for flame proof switch socket and plug combind in LM6 cable termination box in LM6 , 25A, 250V,2P+Earth complete all as specified and directed by Engineer-in-Charge

M&L in replacement for surface mounting industrial plug and socket IP-66/67 protection , 415 volts , 63 Amp complete all as specified and directed by Engineer-in-Charge

M&L in replacement for metal plug and socket with provision for SP MCB complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of flame proof LED light fitting 1x20 Watt including all accessories prewired with heat resistant glass cover, polyester resin enclosure and centrally locking system suitable for class I,Zone II E Ex II C including proper fixing arrangement on elevation on angle iron frame with clamps, nut, bolts & washers of suitable size as recommended by manufacturer and directed by Engr-in-Charge inluding electric connection.

Taking down carefully geyser 25 to 50 Ltrs capacity from wall after unscrewing nuts/bolts etc and again refixing in position after repair & replacement of spare-parts incl testing complete all as specified (Spare-Parts shall be measured & paid for separately under respective items)

Replacement of unserviceable 50Ltr capacity internal tank of geyser with copper tank heavy duty guage with double lapped joint 50 ltr capacity suitable for geyser of any type/make with necessary screws, nut bolts gasket etc complete and all as specified including taking down of Geysers and reassembling, testing and reinstallation after repair complete and all as specified and directed by Engineer-in-Charge.

All as per above but 25 Ltrs capacity complete all as specified.

Replacemet of old usnerviceable syphon assembly for geyser having hole (6/7/9) all complete as per existing make & size as per site requirement all complete all as directed by Engr-in-Charge.

Replacement of old unserviceable heating element with heating element AC 230 volt of rating 1500 watt complete all as specified and directed by Engineer-in-Charge.

All as per Srl No 51 above but of rating 2000 Watt capacity complete all as specified.

Replacement of old unserviceable Thermostat switch with Thermostat switch for geyser AC 230 volt adjustable range from 60 degree celslus complete all as specified and directed by Engineer-in-Charge

Replacement of old unserviceable PVC connection with PVC connection 15mm bore (450mm long) complete with brass nuts at water temprature upto100 degree celceus complete all as specified and directed by Engineer-in-Charge

Replacement of fusible/safety plug melting at 95-100 degree centigrade suitable for any type/make of Geyser complete all as specified and directed by Engineer-in-Charge

Replacement of old unserviceable cable with PVC sheathed, copper conductor, 3 core 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement 9W LED bollards light in cylindrical shape with opal acrylic diffuser and IP 65 protection including connecting electricaly to existing location using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed by Engineer-in-Charge

Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED amp including connecting up with three core flexible copper conductor cable of suitable size complete size complete all as specified and directed by Engineer-in-Charge

Supply and fixing of decorative wall mounting made out of polycarbonated suitable for and incl up to 10 watts LED bulb complete all as specified and directed by Engineer-in-Charge

Supply and fixing of Bed side LED lamp fitting decorative, wall mounting, chrome finish fixture with opal glass diffuser suitable & including 7 to 9 W LED lamp complete and all as specified and directed by Engineer-in-Charge.

Supply and fixing of lED Poarch light fitting LED commercial 2x2 having white powder coated CRCA body with soft opal PMA diffuser at centre, seprate driver suitable for armstrong and Grid ceiling 36 W complete all as specified and directed by Engr In Charge.

Supply and fixing of LED decorative post top lantern Gate light 40 to 45 watt IP 65 protection resistance to impact and corrosion glare, free and better uniformity milky version including taking down old unserviceable post of lantern fittings complete all as specified and directed by Engineer-in-Charge

Fixing Only Switch piano flush button single pole one way 5 amps 230 Volts complete all as specified and directed by Engineer-in-Charge (switches shall be issued under Sch ,B,)

Fixing only tube rod 20/28/36/ 40 Watt /LED tube rod 16W/20W/ LED Tube ftl, 230 Volts complete all as specified and directed by Engineer-in-Charge. (Tube rod/Fittings shall be issued under Sch ,B,)

Cleaning thoroughly gyser 25/50 Ltr capacity with Kerosene Oil and painting with two coat of synthetic enamelled paint including preparation of surfaces, change the U/S lamp any type and writing MES No after painting complete all as specified & directed by Engineer-in-Charge

Replacement of old unserviceable bolt with bolt 12mm 100mm long complete and all as specified and directed by Engineer-in-Charge. (Note- bolt shall be grouted with hammer drill only).

Supply and fixing of gun metal globe or gate valves,with iron wheel head,screwed both ends from iron pipes and fixed in repair of sizes 25 mm bore complete all as specified and directed by Engr In Charge.

Supply and fixing of gun metal globe or gate valves,with iron wheel head,screwed both ends from iron pipes and fixed in repair of sizes 20 mm bore complete all as specified and directed by Engr In Charge.

Supply and fixing of gun metal globe or gate valves,with iron wheel head,screwed both ends from iron pipes and fixed in repair of sizes 15 mm bore complete all as specified and directed by Engr In Charge.

Supply and fix bib taps , cast copper alloy with crutch or butterfly , handle , screwed for iron pipes of 15 mm bore complete all as directed by Engr-in-Charge.

dadwal engineers

Vijay Kumar Contractor and Engineers

M/S SINGHAL ENGINEERS

SATISH AND CO

M/S V K TRADERS

M/S SATYA CONSTRUCTIONS