Vidhayak Nivas-2 (Naya) sthit Awas No. 110-111B me modular type kitchen cabinet va cupboard banane, khadya saamgari rakhne hetu almari banane, kitchen me wall avem floor tiles lagane, kitchen top badalne, shatigrast darwazon ko badalne va anya av

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.A.R No-15.23.1

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (D.A.R No-15.56)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 25 mm nominal dia Pipes D.A.R No- 18.7.3

Providing and fixing Clorinate Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DAR No- 18.8.2

Providing and fixing of CPVC gate valve of 25mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

Providing and fixing SWR pipes as per IS: 13592 110mm dia for drain & sewer system with trenching refilling & testing of joints complete including labour T&P etc.

Providing and fixing SWR pipes as per IS: 13592 90mm dia for drain & sewer system with trenching refilling & testing of joints complete including labour T&P etc.

Providing and fixing of PVC Door bend of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

Providing and fixing of Nahani Trap of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

12 mm cement plaster of mix: 1:4 ( 1 cement 4 coarse sand) (DAR No- 13.4.1)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.A.R No- 11.40)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.( dsr. 8.31)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore dsr 18.53.1

Providing and fixing of glass shelf 22" Acrylic make with C.P. Guard standard size and bracket including supply of all material labour T&P required for proper completion of the work.

Providing and fixing CP towel ring L & K or equivelent fittings arrangement of approved quality.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (D.A.R No-17.31)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mm Kitchen sink without drain board DSR 17.10.2.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore DSR 18.51.1

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cost Iron P or S trap 10 litre low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors whever required. White Vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. D.A.R No-17.1.1

Providing and fixing of white glazed earthen ware Wash Hand Basin with pedestal Sepia, Size- 565x450x175mm, Cat No- C8872 with C.P jali, C.P angle valve, pvc waste pipe, C.P basin mixture, PVC connection 15mm dia 400mm long including supply of all materials labour T&P etc. required for proper completion of the work.

Supply and Fixing C.P. brass bib cock 15mm. dia. Short body L&K 0057 including supply of all materials, labour, T&P etc. required for proper completion of the work.

Providing and fixing C.P. brass OVER HEAD shower with arm heavy quality L&K 0668) with 15mm inlet:100 mm diameter

Providing and Fixing of Almirah with mica laminated 18mm HDHMR board out side with one side decorative lamination .depth of cupord is 30 cm back side of Almirah made by 12mm thick HDHMR board including cost of all accessories such as handle, hinges, lock etc complete work.

Providing and fixing of kitchen shelves/cabinet with basket , shutter is made by mica laminated 18mm HDHMR board and back side of box is made by 12mm HDHMR board. Length and width of cabinet is 50cm and depth/height of cabinet is 65cm including cost of all accessories such as handle, hinges, lock, rolling channel, basket, catcher etc complete work.

Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (74mm & above). (Height upto 2.5 metre). D.S.R No- 9.147.B1.1

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes. D.S.R No- 10.30.2

Providing and fixing fly proof wire gauze to windows, celestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. ( DAR No- 10.29.2)

Providing and fixig ISI marked flush door shutters conforming to IS : 2202 (Part-1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matches commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shulters. 30 mm thick including ISI maked Stainless Steel bolt hinges with necessary. (D.A.R No-9.21.2)

Providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machine cut for kitchen platforms, vandy counters. Window sills facias and similar locations of required size, approved shade colour and texture laid over : 20 mm thick base cement mortar 1:4 ( 1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, Area of slab over 0.50 sqm DAR. No- 8.2.2.2

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats). (D.S.R No-13.81.1)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work. (D.S.R No-13.99.1)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. D.A.R No- 15.60

Please Enable Macros to View BoQ information