SPECIAL REPAIR TO LIVING IN BLDG NO P 498 AT NO 01

Amount

Taking down chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description (Steel/wooden) each.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frame) of any description (Steel/wooden) each.

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm,& refixing in the same opening all as specified and directed.

Dismantling of MS work of any description

Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick

S&F steel windows with side hung shutters including box type hinges with steel handle with strike plate, telescopic peg stay, locking bracket complete with glazing bars for glazed shutter all as specified.

All as per item No 6 above but without glazing bars .

Hacking out old broken glass pane any thickness any size from wooden/steel window frames

Supply and fixing sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane

S&F for 4.00mm thick figured pin headed glass and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet one side reinforced with M.S. Square tube, another side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 including necessary welding where ever required all as specified and directed.

S&F in repairs aluminium alloy anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F as in repair for aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F for aluminium handle 150mm cast type anodised.

S&Fas in repair for aluminium handle 150mm cast type anodised.

M/L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over a coat of red oxide primer all as specified and directed.

M&L for Making good under cills (or over arches, lintels and bressummers) including all pinning as necessary in cement mortor 1 :4

Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

M & L for servicing /easing steel windows shutters of size not exceeding 2 Sqm each including cleaning scrapping hacking oiling/greasing replacing welding broken hinges/handles/stays making good disturbed portion painting all as specified as directed

S&F in repairs mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate complete including cutting of existing rat rail and weldding of the new one in position all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not other wise specifically provided for

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc including Brushing neat cement slurry with 3.0kg of cement per sq. metre

M&L for 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection laid in panels, finished even and smooth w/o using extra cement complete all as specified and directed.

M/L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for below 100 mm thick concrete slab.

M&L for 15 mm thick screed bed in CM 1:4 for floor floor finishes complete all as specified and directed

M&L for 10mm thick rendering on stone masonry in cement mortar 1:3 surface is to be finished even and fair without using exra cement and prepare to receive tile finishes

M & L for non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile complete all as directed and specified.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile complete all as directed and specified.

All as per item No 34 above but on skirting

M & L for Glazed coloued Ceramic tiles of size 450 X 350 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado all as specified and directed

Material and labour for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregate as in flooring finished even and smooth using extra cement.

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for

Demolition of brick/concrete walls built in cement mortar and removing the rubbish off the premises

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Material and labour for Reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl form work.

Material and labour for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for 15mm thick rendering on stone masonry in cement mortar 1:6 surface is to be finished even and smooth without using exra cement

M&L for 5 mm thick rendering on concrete surfaces as in ceiling in cement mortar 1:4 surface is to be finished even and smooth without using exra cement

M & L for pre-cast cement concrete1 :3 : 6 type C1 using 20mm graded stone aggregate block masonry with solid blocks, exc. 10 cm in width and setting in mortar, built in cement mortar 1:4

M & L for Pre-cast cement concrete block masonry type C1, 1:3:6 (using 20 mm graded aggregate) with Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar,complete, in walls with CM 1:4

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall

M&L 10mm thick rendering in CM (1:6) on brick or concrete wall surface finished even & fair without using extra cement as in Wall.

M&L for preparation of newly plastered surfaces and applying , one coat of primer and two coat of oil bound distemper all as specified and directed

M&L preparation of newly plastered surfaces of ceilings and applying two coat of White wash all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coat of Cement based Paint over a coat of primer all as specified and directed

M&L for complete removal and applying chalk whiting ,preparatory to distempering and preparation of old decorated surface including filling up of all nail holes, and applying two coat of OBD all as specified and directed

M&L preparation of old ceiling surfaces and applying two coats of White wash all as specified and directed.

M&L for preparing surfaces plastered /unplastered old surfaces on wall surfaces,and applying one coat of Cement based paint all as specified and directed

M & L for Preparing old painted wooden surface and applying one coat of Synthetic enamel painting all as specified and directed.

Removing existing unserviceable tar felt on any type any description from roof slab alongwith screed bed , cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m from the starting point all as specified & directed

M&L rendering 15mm (average) thick in CM (1:4) on concrete surface, finished even and smooth without using extra cement, mixed with water waterproofing compound all as per manufacturers instructions and as directed by Engr-in-charge

Supply only approved Integral water proofing compound,

M&L Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. and applying a coat of blown bitumen @ 1.20Kg/sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bitiminous Aluminium paint / Primer @c ).10 Kg/Sqm complete all as specified and directed

Dismantling of PVC / any type of drain pipes 100mm dia, jointed in cement mortar and taking out of trenches, if required

Dismantling of PVC/ any type of drain pipes 75mm dia, jointed in cement mortar and taking out of trenches, if required

S&F PVC(SWR) Pipe 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors/ wall all as specified and directed

S&F PVC(SWR) Pipe 75mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors/wall all as specified and directed.

S&F PVC floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100 mm dia

S & F PVC (SWR) bends 110 mm dia in any radius with access door etc.

S & F PVC (SWR) bends 75 mm dia in any radius with access door etc.

S & F 110mm dia PVC (SWR) junction single (single T') equal or unequal with acces door inlcuding jointing with rubber washer and solvent clamps etc.

S & F 75mm dia PVC (SWR) junction single (single T') equal or unequal with acces door inlcuding jointing with rubber washer and solvent clamps etc.

S&F PVC SWR vent cowl 110mm dia

S&F PVC SWR vent cowl 75mm dia

Taking up or down 15mm steel tubing and connections all as specified and directed.

Taking up or down 20mm steel tubing and connections all as specified and directed.

Taking up or down 25mm & 32 mm steel tubing and connections all as specified and directed.

Re-fixing only steel water tubing 15mm bore on walls and ceilings or laid in floors..

Re-fixing only steel water tubing 20mm bore on walls and ceilings or laid in floors.

Re-fixing only steel water tubing 25mm bore on walls and ceilings or laid in floors.

M&L for Galvanised steel tubing 15mm bore of tube medium grade with all fittings fixed complete to walls and ceilings or laid in floors.

M&L for Galvanised steel tubing 20mm bore of tube medium grade with all fittings fixed complete to walls and ceilings or laid in floors.

M&L for Galvanised steel tubing 25mm bore of tube medium grade with all fittings fixed complete to walls and ceilings or laid in floors.

M&L for Galvanised steel tubing 32mm bore of tube medium grade with all fittings fixed complete to walls and ceilings or laid in floors.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth in stone concrete block or slab walls.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S/F plastic seat cover for pedastal water closets, solid, with flat bottom and cover and MS chormium plated/ PVC hinging type device all as specified and directed.

Supply and Fixing in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.

S&Fin repairs WHB vitreous china 550 x 400 mm with brackets fitted on wall including for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, including all fittings complete all as specified and directed by Engineer-in-Charge.

S & F for 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 40 gms) suitable for wash hand basins.

S & F for Pillar taps fancy type of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms).

S&F in repairs Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms)

S & F in repairs angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

S& F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed

S & F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and as directed.

S&F in repairs for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed

S&F in repairs for PTMT Soap dish fix to wall all as directed and specified.

S&F in repairs for PTMT health faucet with 1.00m lomg PVC flexible pipe and wall hook complete all as specified and directed.

S&F UPVC spout pipe 40mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S & F for 1000 Ltrs capacity Rotational moulded polyethylene water storage tanks, 3 layer (cylindrical vertical with closed top) hoisted and fixed in position in cluding dimantling water tanks and removing to store (exc 500 & not exc 1000 Ltr) all as specified in SSR Part I

S&F for 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F for 25 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed

S&F for 32 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble including raking out joints/pointing of cement or cement lime mortar all as specified and directed.

S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed alusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F for Welded steel wire fabric weight per square metre n exc 4 kg fixed to wood or steel members complete

Dismantling boarding, any description, fixed in any position with screws.

M&L for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work including necessary fixing arrangements.

M&L preparing old steel surfaces of any description and applying one coat of synthetic enamel paint all as specified and directed

S&F for in repairs GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste including taking down old and jointing new to old as required.

Grubbing up plants/vegetation digging out roots , filling of holes of any description upto double storey constr from roof and walls and making good the decayed portion with cm 1:3 mixed WPC including coving using the form work if any finally finished the surface with 15mm cm 1:3 complete all as directed.

M & L for 20mm thick screed bed in CM 1:4 for floor finishes complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Provide nosing on steps and rounding wherever required) compete all as specified and directed.

M& L for kota stone slab 20-25 mm thick in riser of steps, skirting dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down copper/aluminum point wiring (light fan, socket or power) complete including fittings such as switch, sockets, ceiling rose, pendents, regulators, sockets, light fittings, wooden boards, bell push, call bell, regulators etc (credit scheduled for above items should be made as per condition separately) and making good to disturbed wall and surface complete all as specified.

M&L for Point wiring using approved colour coding as per IS ( Red, black and green for single phase circuit ), with 1.5 Sq mm cross sectional area, single core, multi stranded copper conductor (FRLS) PVC insulated and sheathed electrical cable ISI Marked and including medium grade PVC conduit of dia not less than 20 mm and conduit accessories concealed in wall/surface including mild steel/pressed steel sunkun boxes (with earth dolly) dully painted with two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socktes etc including PVC insulated multi-stranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr in Charge at site for the following:- Note - (i) Cost of cutting chassing and making good of disturbed surface all to match with existing surface deemed to included in the quoted rates. (ii) Switch ,socket and regulator to be measured and paid separately in respective items.

Light point controlled by one piano type 5 amp switch complete all as specified

One Fan (Ceiling/Exhaust/Wall) point controlled by one piano type 5 amp switch and fan regulator complete all as specified

One 3 pin socket outlet, 5 Amps independent board complete all as specified & as directed.

One socket outlet 3 pin 5 Amps on the same board controlled by separate switch.

One light point controlled by two 2 way switches all as specified

All as per item No 112 here-in-before but with 2.50 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 2.50 Sq mm size all as specified

M & L for switch piano flush type 6 Amps 240 volts single pole one way complete all as specified

M & L for switch piano flush type 16 Amps 240 volts single pole two way complete all as specified

M&L for socket outlet 2 in 1 , 5 pin, 6 Amps 240 volts complete all as specified

M&L for switch piano flush type 16 Amps, 240 volts one way.

M&L for Socket flush type 6/16 Amps, 2 in 1, 240 volts complete all as specified

M&L for ceiling rose surface bakelite, 3 terminal complete all as specified & as directed.

Taking down old unserviceable main switch/DBs/MCB DBs with MCB including making good the disturbed surface complete all as specified

M&L for sheet metal enclosure MCB DB, SPN, 240 volts, 8 way with suitable bus bas, double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete all as specified

M & L for VTPN distribution board, 415 volts , 50 Hz, 04 way with 200 Amps rated bus bar, vertical double door type, IP 43 suitable for 250 Amps 4 pole MCCB as incoming and MCB SP as outgoings, fixed flush in wall and making good all disturbed surfaces in all respects and complete all as specified and directed.

M & L for VTPN distribution board, 415 volts , 50 Hz, 04 way with 200 Amps rated bus bar, vertical double door type,IP 43 suitable for 100 Amps 4 pole MCCB as incoming and MCB SP as outgoings, fixed flush in wall and making good all disturbed surfaces in all respects and complete all as specified and directed.

Supply and fixing MCB SPN, 240 volts AC 50 Hz, 32 Amps all as directed.

S&F MCB SP 240 volts, 10 KA, B-Series 6 to 32 Amps complete all as specified

S&F MCCB 4 Pole, 415 V, Adjustable type, 160Amps with breaking capacity 36 KA fixed type complete all as specified

S&F MCCB 63 Amp 16KA three pole 415 Volts, 50 Hz with thermal magnetic release, fixed type complete all as specified & as directed.

Taking down sub main wiring including batten /Conduit complete all as specified.

M&L for surface sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc including PVC insulated,one run of unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green

M&L for surface sub main wiring with 4 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 10 sq mm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 32 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, including two runs of unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red/Yellow/Blue, Neutral-Black and Earth-Green

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete as specified and as directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Taking down of existing ceiling fan Fan from any height, opening and dismantling for greasing and painting of fans complete with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust writing MES No with black paint etc and hanging of fans at same location including clamp with nut/bolt and rubber bush of any make connecting up including provision of cable from ceiling rose to fan complete all as specified and directed by Engr/in/charge.

S&F step type fan regulator electronic type ( flush type ) 240 volts and electrical connections complete all as specified & as directed.

M&L for providing earthing complete with GI earth plate electrode of size 60 cm X 60 cm X 6 mm thick burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 4 mm dia GI wire by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.5 of SSR Pt-I, connected to earthing main switch board/main board including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (Medium grade) for watering and 15 mm bore GI pipe (light grade) for protection of earth lead etc. complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core overall sheaths laying in trenches/cable ducts, fixed to wall/panel complete all as specified

Excavation soft and loose soil in trenches n exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation for poles, stay, laying cables etc and getting out in any type of soil complete all specified and as directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exeeding 25 cm in any type of soil all as directed.

Removing the excavated soil to a distance not exe 50 m and depositing where directed at a level n exe 1.5 m above the starting point all as direced.

M& L for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983 and as directed. Note :- Excavated approved soil shall be ribbed by using sieve to separate composite particles etc as per IS and refiiling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is than gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness only will be considered for paymet.

Supplying and laying reinforced precast concrete cable cover, class LV, type 1 flat of size 250mm x 150mm x 40mm laid dry flat in trenches complete all as specified and directed.

Material and labour for cutting of bituminous road/ hard standing/PCC path/wall up to a size not exceeding 20 cm width and not exceeding 60cm in depth for laying of protection pipe for cable including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1, 40 mm grade crushed stone aggregate up to existing surface level or removing the any type of tiles carefully and refixing properly as per existing surface complete all as specified.

Supply and fixing in replacement of GI tubing light grade of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as specified and directed.

SRI MARUTHI BUILDERS

PRACHANIVA CONSTRUCTIONS

Maruthi constructions

S CHANDRASHEKAR (SREE BUILDERS)

SHREE JAGANNATH CONSTRUCTION

chowdeshwariconstructionco

D NAGI REDDY

VARGHESECHACKO AND CO