PERIODICL SERVICES AND MISC B/R REPAIRS TO HAMID VIHAR MD ACCN IN ZONE-I AREA UNDER AGE B/R-I OF GE JAIPUR

Amount

M&L for preparation of old plastered surfaces of wall, washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying one coat of distemper oil emulsion with hand roller complete all as specified.

Complete removal of existing treatment of old plastered surfaces of wall and preparing the surface including washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying two coats of distemper oil emulsion with hand roller over a coats of wall care putty complete all as specified.

Complete removal of existing treatment of old plastered surfaces of ceiling and preparing the surface including washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying two coats of distemper oil emulsion with hand roller over a coats of wall care putty complete all as specified.

M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying one coat of white wash all as specified and directed

,---ditto--- all as per serial item No 4 above but two coats of white wash on wall.

M & L for preparation of old plastered or unplastered decorated surfaces of ceiling including brooming down and cleaning the surface and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

,---ditto--- all as per serial item No 6 above but two coats of white wash on ceiling.

M&L complete removal of exising treatment and thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smmoth surfaces, including all necessary arrangement for execution of work and applying two coats of Cement Base Paint using hand roller of over and including one coat of water based white pigmented akali resistant priming paint for external wall, complete all as specified and as directed by Engineer-in-Charge.

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface complete all as specified and as directed by Engineer-in-Charge.

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified and directed.

Demolition of stone or brick masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' Bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L Brick work with sub-class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M & L providing cement concrete 1:2:4 type B-1 (20 mm graded aggregates) as in coping over wall complete all as specified and directed.

M & L stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge held against the dressed surface n. exc 40mm for Sand stone and dressing of face beds and joints, as specified of random rubble walling uncoursed complete all as specified and directed.

M&L for ponting to squared rubble, coursed or uncoursed stone masonry with cement mortar in 1:4 as per specification or directed.

Taking down cement plaster on brick / stone wall, ceiling etc incl. raking outs joints, hacking for key, scrubbing with water etc. complete all as specified and directed.

M&L for wash stone grit plaster on exterior walls in two layers, under 12mm thick plaster in CM 1:4 furrowing the under layer with scrtched tool, applying cement slurry on the under layer 3kg /sqm, top layer 15mm thick cement plaster 1:1.5:2 (one cement, 1.5 sand, 2 stone chipping 10mm nominal size) in panel with groove all aroung as per approved pattern incl scrubing and washing, the top layers with brushes and water to expose the stone chipping completeall as specified.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 10mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 10mm thick on dubbing out surfaces on ceiling in CM (1:3) as floating/ setting coat in patches not exc 3 sqm each patch complete all as specified and directed.

M & L GI wire netting 0.90mm dia and 12mm mesh lathing to metal studding etc in ceilings including all laps, cutting and waste in repairs in patches n exc 5 sqm each including taking down old and jointing new to old as required.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall complete all as specified and directed.

M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper of any tint over and including one coat of alkali resistant priming paint complete all as specified and directed.

M&L for making good the edges of chajjas/ facias in proper shape with rich cement mortar 1:2/ PCC 1:2:4 type B-1 including matching the surface with existing treatment complete all as specified and directed.

M&L 50mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protections, finished even and fair with joints 10 mm wide and in full depth at corners and @ 3m c/c filled with mastic mortar complete all as specified and directed.

M & L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in coving at juction of chajja/slab and wall/ lintel/ beam finished even and smooth in any situation and position including form work complete all as specified and directed.

M&L 18-20 mm thick kesaria Green marble (table rubbed & polished) in cooking plat forms & edges in and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L 15-16mm thick Granite work (table rubbed & polished) (Rajasthan black) in window-cills etc over & incl 15 mm screed thick in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and directed.

S & F in repair 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and directed.

S & F in repair 4mm thick figured glass pin head type and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and directed.

S&F MS bracket for curtain rod 25mm dia complete all as specified & directed.

S & F in repair drapery rod MS 25 mm dia incl fixing brackets and decorative knobs on each end of rod of approved pattern and colour complete including taking down old curtain rod with brackets complete all as specified and directed.

S & F in repair swivel shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, (minimum weight 40 gms) complete all as specified and directed.

Dismantling old unserviceable RCC / PVC water tank & removal from site complete all as directed capacity exceedind 250 ltr and not exc 500 ltrs complete all as specified and directed.

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part I, complete all as specified and directed.

S & F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 15mm dia (minimum weight 142 gms) complete all as specified and directed.

S & F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and directed.

S & F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Disconnecting existing water tank of capacity exc 250 and not exc 500 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in same position including cleaning and removing all scale and dirt etc from service tanks and from mouths of circulating pipe etc including replacement of float valve complete all as specified and directed.

S & F in repair towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches or in floor incl PCC beddinh, haunching for 100mm internal dia of pipe complete all as specified and directed.

S & F as in repair cast iron floor trap 75mm dia outlet with grating including jointing to wastage pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F in repairs PVC waste pipe flexible 32mm dia for WHB complete all as specified and directed.

S & F in repair hasp and staple of size 100mm mild steel safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repair 100mm butt hinges medium weight cold rolled mild steel including necessary welding work for fixing to mild steel/ iron door frame and fixed to shutter complete all as specified and directed.

M & L for repair of broken projecting type/ box type hinges of steel window/ ventilators with and including new hinges fixed by welding incl matching with existing surface and easing the window for opening and closing complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as directed of approved quality complete all as specified and directed.

S&F as in repair 15mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F as in repair 15mm bore PTMT bib tap, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F PVC water storage tank cover for capacity exc 250 ltr but not exc 500 ltr including driling holes for nut and bolts complete all as specified and directed.

Demolition of PCC in roof covering. Kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing tratment of any type all as directed by Engineer - in charge.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0,( 1.2.4) using 12.5 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement complete all as specified and directed. Note : WPC shall be measured and paid seperately.

M&L rendering 10mm thick in cement mortar (1:3) on concrete surfaces to receive water proofing treatment finished even and fair complete all as specified.

M&L for surface shall be painted with one coat of polymeric primer @ 0.40 kg per sqm conforming to IS: 3384 . 3 mm thick minimum weight not less 150 gms ) and upper side of membrane thermally insulated with white mineral finish uniformly embedded during manufacturing process. Side over lap shall be 75 mm and ends shall be 100 mm and all over lap and joints insert upto thr ht 150 cm vertical surface imbeded in wall and finifhing in CM 1:3 , embeding membrane into spout pipe, roof down ward facia and shall sealed by torch application with bitumen 30/40 grade, painetd with hot paving bitumen grade 30/40, confirming to IS -73 @ 1.20 kg per sqm over a coat of bitumen primer confirming to IS -3384 @ 0.30 Litre per sqm and all as specified Applicatiion of polymeric memberance shall be torch application all as per manufacturer instructions.

M&L preparation of APP based polymeric surface and applying two coat of aluminium paint all as specified & as directed.

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame complete all as specified and directed.

Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4 sqm each without taking off shutters from the frame complete all as specified and directed.

Taking down resecuring or easing and refixing in same opening of old door shutters of any description exc 1 Sqm but n exc 2 Sqm in size complete all as specified and directed.

S & F mild steel framed work as in door frame of angle or other section and fixed with angle cleats and connecting plates etc of Gde E-165 (Fe-290) Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 300mm long mild steel sliding door bolt clip type stove enamelled black with bright bolt not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate complete all as specified and directed.

S & F 150mm long mild steel pressed handles oval type stove enamelled black complete all as specified and directed.

S & F 125mm long aluminium handles, cast type anodised complete all as specified and directed.

S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete

S & F 125mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S & F aluminium door stopper 140mm size with double pin and rubber shoe fixed in bottom of door shutter complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperature 1.40mm and fixed with stainless steel wire stapels complete all as specified

S&F anodised aluminium powder coated frame of standard section for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

Supply only galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply only 4mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and directed.

M & L Preparing of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L two coats of synthetic enamel paint to steel surfaces over red oxide primer exc 10 CM in width or girth including preparation of steel surfaces complete all as specified and directed.

M&L welding in repairs to mild steel hinges coming out from steel frame (rates to be included for filling material) complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 25mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor all as specified

M & L coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L glazed ceramic coloured tiles 300x200x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L coloured non skid joint free tiles 400x400x7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M & L coloured glazed joint free ceramic tiles 450x300x7 to 8mm thick in vertical surface as in skirting over & including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved and directed

M&L for light shade full body vitrified matching tiles 8 to 9.5mm thick (square / rectangular) area of each tile n exc 0.36 sqm in floor etc using approved chemical mortar adhessive to match with coloured tiles & including 15mm th screed bed in cm 1:6 complete all as specified and directed.

All as per item no 93 but as in skirting and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles and including 10mm thick as in back coat in CM 1:4 complete all as specified and directed .

Supply only liquid water proofing compound complete all as specified and directed .

M&L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed .

Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming toIS 1161-1979 graded St-240 complete all as specified and directed .

Dismantling boarding plywood etc of any description and in any position fixed with nails etc all as directed.

S & F 18 mm thick HDHMR (High density high moisture resistant ) Kitchen cupboard/door shutter one side white laminate and other side decorative as in modular kitchen/ cabinets/door shutter fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of pearlwood or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer,fixed to wall etc complete all as directed

S & F 8 mm thick HDHMR (High density high moisture resistant ) board of 'Pearlwood' or equivalent both side white laminate as in back of kitchen cabinets/partion of cupboard etc.complete all as directed

S & F kitchen plain baskets of stainless steel size 17" x20" x 4" of grade SS-304complete all as specified & directed. (Make : Godrej, Hindware, Lifetime)

S & F kitchen prerforated cutlery baskets of stainless steel size 17" x20" x 4" of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime)

S & F kitchen cup & saucer baskets of stainless steel size 17" x20" x 4" of grade SS-304complete all as specified & directed. (Make : Godrej, Hindware, Lifetime)

S & F kitchen plate baskets of stainless steel size 17" x20" x 6"of grade SS-304 complete all as specified & directed. (Make : Godrej, Hindware, Lifetime)

S & F kitchen grain baskets of stainless steel size 17" x20" x10" of grade SS-304 complete all as specified & directed (Make : Godrej, Hindware, Lifetime)

S & F stainless steel basket guide channels suitable for running basket as mentioned in item 33-37 above of grade SS-304 complete all as specified & directed. (Make : Hettich or equivalent)

S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed. Make Nebco or equivalent

S & F stainless steel Auto clave hinge fancy type of approved make complete all as specified & directed. Make Nebco or equivalent

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed.

S&F in repair bib taps 15mm bore 2-in-1 cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F in repair WHB mixer single lever 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F in repair brass CP towel rail 60 cm long square complete all as specified and directed.

S&F SS towel ring square including Chromium plated brass screws & plastic rawl plug complete all as specified and directed.

S&F Soap dish, CP brass square fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 150mm x 150 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs Brass chromium plated shower arm 15mm size including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs, PTMT alloy bathroom cabinet with mirror of overall size 300 x 450mm complete all as specified and directed.

S & F wall mixer brass hot & cold, 15mm bore with connection to overhead shower, bright finish, screwed the ends for iron pipe and plugging complete all as specified and directed.

S & F 250 mm Corner Glass shelf with brass brackets complete all as specified and directed.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S&F in repair vitreous China white single piece WC (European type) incl inbuilt vitreous china cistern size 360X640X680mm strap 220 all as specified and directed.

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan (pedestal pattern) white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white flat back, size 560 x470 mm excluding taps, waste, chain & plug and porcelene stopper but including brackets /fastners, cutting for and pinning in ends of brackets but exclussive of fixing of supply and waste pipe complete all as specified and directed.

S&F brass CP health faucet with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook complete all as specified and directed.

S&F im repair brass CP toilet paper holder with flap, chrome finish complete all as specified and directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

SUMEET TRADING COMPANY

J.J.ENGINEERING

ANKIT BUILDERS