SUPPLY AND INSTALLATION OF AUTOMATIC SPRINKLER SYSTEM IN O.P.D /WARD/BURN WARD/ EMERGENCY DEPARTMENT AND FIRE FIGHTING, FIRE ALARM AND AUTOMATIC SPRINKLER SYSTEM IN O.T. BLOCK AT MAHARANI LAXMIBAI MEDICAL COLLEGE, JHANSI

(A) Main Piping and Valve

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:. [Make As per List Attached]

100 mm dia

150 mm dia

200 mm dia. (Wall thickness 6.3 mm)

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required [Make As per List Attached]

100 mm dia

150 mm dia

200 mm dia.

Supply, Fixing,testing and commissioning of butterfly valve of PN- 1.6 Rating with bronze / gunmetak seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : [Make As per List Attached]

100 mm dia

150 mm dia

200 mm dia.

Providing and fixing of 25 mm dia Ball Valve. [Make As per List Attached]

Providing and fixing air release valve. [Make As per List Attached]

Supplying & fixing air vessel made out of 250 mm dia,8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Providing & fixing flow switch in following sizes M.S. pipe including conenction etc. as required. [Make As per List Attached]

150 mm dia

Sub Head : B (External Hydrant)

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. [Make As per List Attached]

150 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:. [Make As per List Attached]

80 mm dia

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : [Make As per List Attached]

Single headed gunmetal

Hose cabinet stand mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted (4mm thick glass with rubber bedding) door and size of the cabinet shall be 600x750x250mm. Quoted rate shall inlclude suitable stand for mounting from ground level with supports and fastners etc. and cabinet shall be painted/powder coated of approved colour both inside and out side.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: [Make As per List Attached]

Gun Metal

Supplying and fixing 63mm dia 15m long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire rivets etc. conforming to IS 636 (type-A) as required:

Gun Metal

Sub Head : C (Internal Hydrant)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:. [Make As per List Attached]

100 mm dia

150 mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : [Make As per List Attached]

Single headed Gunmetal

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: [Make As per List Attached]

Gun Metal

Supplying and fixing 63mm dia 15m long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire rivets etc. conforming to IS 636 (type-A) as required: [Make As per List Attached]

Gun Metal

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. [Make As per List Attached]

Providing/Fixing Fire man Axe [Make As per List Attached]

CO2 type Fire extinguisher ISI marked confirming to IS:15683 latest. Capacity 4.5 kg complete with delivery hose horn, squeeze grip release valve, locking arrangement, operating temperature -30°c to +55°c, supplied with body bearing IS 7285 mark and approved valve as per IS 3224. Co2 Gas as per IS:15222. externally painted with PO Red Shade No. 538 of IS 5, operation manual and floor stand or wall mount Bracket including accessories as required as per site condition. [Make As per List Attached]

Powder Fire extinguisher (stored Pressure Type) (Powder pressurized with dry nitrogen gas at 15 bar) capacity 4.5kg duly ISI marked conforming to IS:15683:2006/latest, with IS 14609 ISI marked ABC powder complete with squeeze grip release valve, discharge pipe, locking arrangment, pressure gauge, operation manual, Body Hydrotested at 35 bar, operating temperature-30°c to +55°c, external epoxy powder coating with PO Red shade No. 538 of IS 5, and floor stand or wall mount Bracket including accessories as required as per site condition. [Make As per List Attached]

Sub Head : D (SPRINKLER SYSTEM )

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:. [Make As per List Attached]

25 mm dia

32 mm dia

80 mm dia

Providing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories: [Make As per List Attached]

Pendent Sprinkler

Horizontal side wall sprinkler

Dial Type pressure guage for (0-16 kgf/cm2) with necessary nipple & other fittings, mounting arrangements and with 15 mm ball valve. [Make As per List Attached]

Supply, Installtion, Testing & commissioning of 25mm ball valve with sight glass for sprinkler test line. [Make As per List Attached]

Supply, Installation, testing & commissioning of 50mm ball valve for sprinler drain line. [Make As per List Attached]

Providing & fixing flow switch in following sizes M.S. pipe including conenction etc. as required. [Make As per List Attached]

100 mm dia

Supply, Fixing,testing and commissioning of butterfly valve of PN- 1.6 Rating with bronze / gunmetak seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : [Make As per List Attached]

80 mm dia.

100 mm dia

150mm dia

Providing, Installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL listed or FM approved complete as required.

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. [Make As per List Attached]

Supply, Installtion, testing and commissioning of 25 mm diameter Forged Brass air release valve PN-1.6 Body. [Make As per List Attached]

Supply, Installation and commissioning of Annunciator Panel with 7 windows with point, zone & system status used with RS 485.

Supply, Installation wire for annunciator panel.[Make As per List Attached]

3 core 1.5 sq mm.

Fire Alarm SystemWork

Two Loop Panel.

Supplying, installation, testing & commissioning of intelligent analog addressable photo thermal detector complete with mounting base complete as required. [Make As per List Attached]

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. [Make As per List Attached]

Supplying, installation, testing & commissioning of addressable phone control module complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required. [Make As per List Attached]

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required. [Make As per List Attached]

Supplying, installation, testing & commissioning of fault isolator complete with base as required. [Make As per List Attached]

Supplying, installation, testing & commissioning of repeater panel with 320 character/ Touch screen LCD display with inbuilt reset ackowledge and silence switches complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. [Make As per List Attached]

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR 2018 SI No 501 [Make As per List Attached]

120 Sqmm 3.5 Core

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. PWD SOR 2018 SI No 503 [Make As per List Attached]

120 Sqmm 3.5 Core

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of the Engineer incharge.PWD SOR 2018 SI No 504

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required [Make As per List Attached]

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required. [Make As per List Attached]

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required. [Make As per List Attached]

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.