Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | L1 | Accepted-AOC Quoted rates of lowest bidder found reasonable hence accepted | |
| 2 | L2₹9.8 L+₹8,981.96 (0.93%)Rejected-AOC | L2 | Rejected-AOC Quoted rates are high hence rejected | |
| 3 | L3₹10.0 L+₹25,563.77 (2.63%)Rejected-AOC | L3 | Rejected-AOC Quoted rates are high hence rejected | |
| 4 | L4₹10.1 L+₹37,463.94 (3.86%)Rejected-AOC | L4 | Rejected-AOC Quoted rates are high hence rejected | |
| 5 | L5₹10.2 L+₹47,797.76 (4.92%)Rejected-AOC | L5 | Rejected-AOC Quoted rates are high hence rejected |
Tender Value
₹9.7 L
EMD Value
₹19,300
Closing Date
25 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mr GURUDAS GOLDAR, AE (CIV)
AGE (I) TAWANG Pin- 900198 C/o 99 APO
PROVN OF 02 X BATHROOMS, 02 X TOILETS AND 01 X URINAL ALONGWITH COMPLETE PLUMBING AND OVERHEAD WATER TANKS FOR JCOS LIVING OF 312 FD REGT UNDER AGE (I) TAWANG
2023_MES_612069_1
8524/AGE(I)/TWG OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Tawang
REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
AGE (I) TAWANG
₹19,300
12 Oct 2023
4 Aug 2023
1 Sept 2023
4 Aug 2023
25 Aug 2023
18 Aug 2023
4 Aug 2023 - 11 Aug 2023
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil.
Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.
Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.
Materials and Labour for Plain cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified.
Materials and Labour for plain cement concrete (1:3:6) type C-1, using 20mm graded stone aggregate as in surface channel and drain complete all as specified and as directed.
Materials and Labour for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface.
Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, finished even and rough, complete all as specified and directed.
Materials and labour for concrete block masonry with solid precast block of plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggt , exceeding 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed.
Materials and Labour for providing precast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate in cover slabs (for man holes/drains etc.) and similar articles with plain faces including necessary formwork, placed in position and set in cement mortar (1:6) complete all as specified and directed.
Materials and Labour for formwork to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.
Materials and Labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed
Materials and Labour for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed
Materials and Labour for reinforced cement concrete (1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs under reamed pillars and mass concrete complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)
Materials and Labour for reinforced cement concrete (1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in column, pillars, piers, post and struts complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)
Materials and Labour for reinforced cement concrete (1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)
Materials and Labour for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
Materials and Labour for TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
Materials and Labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening (Beam, tee, angle, channel or flat sections) icluding distance pieces, cleats etc, complete all as specified & directed.
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete all as specified and directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
Supply and fixing Mild steel butt hinges, medium weight, cold rolled 100 mm size , complete all as specified and directed.
Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 125 mm long, complete all as specified and directed.
Supply and fixing Aluminium handles, cast type, anodized, 100 mm size , complete all as specified and directed.
Supply and fixing for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
Supply and fixing MS butt hinges medium weight 75mm long, complete all as specified and directed.
Supply and fixing second class hard wood plain solid straight chowkhats and frame wrought framed rebated on the soild, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.
Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed.
Materials and labour for 25 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggt as in sub bases of floor finished even and rough, complete all as specified and directed.
Materials and labour for screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes/tiles , complete all as specified and directed.
Materials and Labour for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.
Materials and labour for rendering 10mm thick in cement morter (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Materials and labour for Coloured Glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.
Materials and labour for rendering 15mm thick in cement morter (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.
Supply and fixing second class hardwood boarding, 40 mm thick, fixed with nails in any situation (except flooring and skirting), clean sawn with butt joints, complete all as specified and directed.
Materials and labour for second class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads not exc 3 sqcm in section complete all as specified and directed. .
Supply and fixing 4mm thick Plywood, grade BWR, type BB, fixed with screws to timber framework as in ceiling etc complete all as specified and directed.
Materials and labour for applying three coats of white wash on new wall surface including preparation of surface, complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of cement primer on wall complete all specified and directed.
Materials and labour for preparing of new wooden surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection etc. finished the surface of concrete fair and even, complete all as specified and directed.
Supply and fixing Vitreous China EWC, white (excluding flushing cistern and flush pipe) including P or S traps complete all as specified and directed.
Supply and fixing 10Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
Supply and fixing of Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.
Supply and fixing Vitreous China WHB, white, flat back size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed.
Supply and fixing for Waste coupling of 32mm dia PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms), complete all as specified and directed.
Supply and fixing Soap dish, viterous china white appx size160x160x90 mm complete all as specified and directed.
Supply and fixing Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.
Supply and fixing cromium plated Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, complete all as specified and directed.
Supply and fixing Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
Supply and fixing in repairs, 15mm cromium plated, Bib taps, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
Supply and fixing for 450mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.
Supply and fixing for Grating round 140 mm size of PTMT. (Minimum weight 50gms), complete all as specified and directed.
Supply and fixing 20 mm outer dia 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN 16), UV stablised and antimicrobial fution welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.
Supply and fixing 25 mm outer dia 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN 16), UV stablised and antimicrobial fution welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.
Materials and Labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 110mm bore with access door, complete all as specified and directed.
Supply and fixing PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
Supply and fixing for 75 bore PVC (SWR) floor trap with grating including jointing with solvent cement, complete all as specified and directed.
Supply and fixing for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 Brackets over 10 kg each to be measured under 'Structural Steel' complete all as specified and directed.
Supply and fixing for ball brass valves 25mm, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified as directed.
Supply & fixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity hoisted and fixed in position, connecting with existing pipes all as specified in SSR Part I complete all as specified and directed.
Materials and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC casing caping of suitable size on surface of wall including provn of PVC box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed.One light/fan/call bell point controlled by one switch one way 5 Amps
All as per Item No. 68 above but for One 2/3 pin socket outlet 5Amps on independent board
All as per Item No. 68 above but one switch socket combination 15 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm
Supply and fixing Switch piano, flush type, single pole, one way switch 5 Amps.
Supply and fixing Switch socket combination 2 in 1, 5 Amps flush type.
Supply and fixing Ceiling rose surface bakelite 3 terminals 65x50mm all as directed.
Supply and fixing Single pole and neutral Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps, 240 Volts, AC,50 HZ, completete all as directed and specified.
Supply and fixing decorative 20 Watt LED lighting fittings, fixed to walls/ceiling, environmental friendly, energy efficient ready to use pack . Make : Crompton. Cat No-CCS-100-20-65-HL2-DP-NWH or equivelent of Bajaj/Philips/ Havells
Supply and fixing Lamp holder angle type made of PVC/Polycarbonate with back plate.
Supply and fixing LED bulb 9 watts . Make : Havells. Cat No-LED ADORE 9W B22 2 STAR LAMP or equivelent of Bajaj/Philips/Crompton.
Supply and fixing street Light fittings 35 watts, pressure die cast housing with integrated lences, high power, IP 66 protection complete all as specified and as directed. Make :Crompton. Cat No- TRP-400-35-57-SL-LM-NSR or equivelent of Bajaj/Philips/ Havells
Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and directed.
Supply, fixing and connecting exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.
Supply and fixing MCB distrubution board SPN 8way double door, sheet steel,phosphatised,powder coated with 200 amps bus-bar,neutral link,earth bar and din rail 240 V ,complete all as specified and directed. by engineer-in-charge.
Supply and fixing MCB Single pole & neutral 240volts 32 Amps, 10KA rupturing capacity, C series
Supply and fixing MCB Single pole, 240 volts 5 to 32 Amps 10 KA rupturing capacity, C series
Supply & fixing PP-R Gate valves (brass insert) for outer dia of pipe 32 mm as per requirement of the site complete all as specified and directed.
Supply & Fix ball brass valves 25mm high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed.
Supply & fixing PP-R distribution branch with PP-R main of 16 to 40 mm sizes by providing and fixing tee including cutting and making fusion joint etc.as per requirement of the site complete all as specified and directed.
Supply and fixing 32 mm outer dia 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN 16), UV stablised and antimicrobial fution welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.
Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner shethering of PVC tape armoured with galvanised steel wire or tape and overall PVC shetered 10 Sqm 2 Core nominal cross section in sevice connection complete all as specified.
Supply and fixing 'light grade' galvanised, 50 mm dia with all fitting laid in trenches complete all as specified.
Supply and laid in trenches double walled corrugated HDPE pipes of inner dia 38 mm and outer dia 50 mm, as in cable protection work, complete all as specified and directed.
Materials and labour for earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers connected to and including GI earth wire 4.0 mm dia upto 7.5 mtr by means of bolts, nuts, check nuts and washers, and protected by light grade 20 mm dia and connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with P C C 1:2:4 Type C2 (including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 metre and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009
M/S KESANG CONSTRUCTION
SHELLUNG CONSTRUCTION
M/S T G ENTERPRISES
M/S L N BUILDERS
M/S TARAYANA BUILDERS
M/S N T BROTHERS
M/S L.N. TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .