IMPROVEMENT OF ELECTRICAL INTERNAL WIRING IN OTM OFFICER MESS AND OFFICER AREA AT VARANASI UNDER GE (EAST) ALLAHABAD.

Amount

Taking down carefully point wiring of any type and any description / caping or concealed [light point, fan point or socket point] including removal of battens, pipes, plug sockets, switches, shades, ceiling roses, light fittings etc complete and making good disturbed surface to match the exisitng complete all as specified & directed.

Taking down carefully sub main wiring of any nos of wire with wire on wooden batten or surface conduit or concealed conduits complete all as specified & directed.

Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and making good disturbed surface or portion of walls complete all as specified & directed.

Material & Labour Point wiring with PVC Insulated 1.5 Sqmm multi-stranded copper conductor FRLS cable 1100 Volts grade drawn into and including PVC Casing & Capping medium grade not less than 20mm wide [wall thicknessof casing caping 1.2 mm] (ISI marked) including all fittings and fixings accessories including 1.6 mm thick factory fabricated sunken pressed steel terminal boxes duly painted with one coat of anti-corrosive paint outside and two coats of aluminium paint inside with and including 2.8 mm thick top cover hylam brand plastic laminated white sheet cover for mounting switches, sockets, fan regulators fixed with steel screws with cup wahsers and including PVC Insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire complete all as specified and directed for following poit wirings:---

(a) One light / fan point controlled by one switch

(b) One light point controlled by two, two way switch

(c) One buzzer or bell point controlled by one switch

(d) One socket point 3 pin switch socket out let 5 Amp controlled by one switch on same board.

(e) One socket point 3 pin switch socket out let 5 Amp controlled by one switch on Independent board.

Description same all as per item No. 04 here in above but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm with 1.5 Sqmm multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp Independent board complete all as specified & directed.

Supply & Fixing switch piano flush type single pole one way 5 Amps flush type complete all as spicified & directed.

Supply & Fixing switch piano flush type single pole two way 5 Amps flush type complete all as spicified & directed.

Supply & Fixing bell push 5 Amps flush type complete all as spicified & directed.

Supply & Fixing socket out let 3 pin 5 Amps complete all as spicified & directed.

Supply & Fixing Switch socket combination 2 in 1, 3 pin / 5 pin, 5 Amp & 15 Amp flush type complete all as specified & directed.

Supply & Fixing Ceiling rose surface bakelite type 60x30 mm three terminals of polycarbonate body complete all as specified & directed.

Supply & Fixing lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed.

Supply & Fixing fan regulator electronic stepped type suitable for ceiling fan complete all as specified & directed.

Supply & Fixing electric ding dong bell AC operated on 230 Volts complete all as specified & directed.

Material & Labour for Sub main wiring with two run of single core PVC Insulated cable of size 10 Sqmm multi-stranded copper conductor FRLS cables drawing into and including PVC Casing & Capping medium grade not less than 32mm wide [wall thicknessof casing caping 1.2 mm] (ISI marked) including all fittings and fixings accessories including one run of 6 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire complete all as specified & directed. Note : - Two run of 10 Sqmm & one run of 6 Sqmm cable shall be measured as one unit run.

Material & Labour for Sub main wiring with two run of single core PVC Insulated cable of size 6 Sqmm multi-stranded copper conductor FRLS cables drawing into and including PVC Casing & Capping medium grade not less than 25mm wide [wall thicknessof casing caping 1.2 mm] (ISI marked) including all fittings and fixings accessories including one run of 4 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire complete all as specified & directed. Note : - Two run of 6 Sqmm & one run of 4 Sqmm cable shall be measured as one unit run.

Material & Labour for Sub main wiring with two run of single core PVC Insulated cable of size 4 Sqmm multi-stranded copper conductor FRLS cables drawing into and including PVC Casing & Capping medium grade not less than 25mm wide [wall thicknessof casing caping 1.2 mm] (ISI marked) including all fittings and fixings accessories including one run of 2.5 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire complete all as specified & directed. Note : - Two run of 4 Sqmm & one run of 2.5 Sqmm cable shall be measured as one unit run.

Supply & Fixing 1x18-20 watt four feet long decorative box type [Ultra slim] linear LED [6000K] batten light fittings with co-extruded polycorbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire 1.2 RM long & fixed to wall firmly complete all as specified & directed. Make : Crompton Trim Lenia Cat Part No. LCTL-18-CDL / Havell's ELite Pride 18 W / Bajaj BCLSBAL 18W CW LED or model make in Philips.

Supply & Fixing in repair 18-20 watt four feet long high efficiency retrofit tube rod suitable for fixing in existing fittings of 36 watt complete all as specified & directed. Make : Philips / Havell's / Crompton / Bajaj

Supply & Fixing in repair table lamp suspended type with PVC insulated copper conductor two core wire and light fittings with PVC grip holder including 9 watt LED complete all as specified & directed.

Supply & Fixing ultra slim edgelit LED down lighter 18 watt high efficiency glare free powder coated aluminium housing hanging on ceiling with steel chain complete all as specified & directed. Make : Philips / Havell's / Crompton / Bajaj

Supply & Fixing aesthetically desigend edge lite LED linear mirror light fittings 1x9 watt with high output PMMA diffuser for glare free light decorative, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire 1.2 RM long & fixed to wall firmly complete all as specified & directed. Make : Havells Cat Part No. LHEXAPRP7PN1W009 / Crompton / Bajaj or Philips.

Supply & Fixing 10 watt LED bulk head light fittings having 600 Lumen enclosed in polycarbonate body, weather proof with co-extruded poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire & fixed to wall firmly complete all as specified & directed. Make : Havell's Model "Endura Rugby" Cat Part No. RUGBYNEONFT10WLED760SSYMBOPC / Bajaj Model Wee Plus CAt Part No. BIWP10WLEDLCL-07-CDL / Crompton or Philips.

Supply & Fixing in repair building security / street LED light fitting 15 watt IP-65 protection pressure die-cast aluminium body, heat resistant glass, including driver and making necessary electric connection with 2.5 Sqmm twin core copper wire 1.5 long complete fixed in existing GI pipe bracket fixed to pole or on walls complete all as specified & directed. Make : C&S Cat Part No. LTESS15WLED / Crompton / Philips or Havells as approved by GE.

Supply & Fixing in repair pilalr or gate LED light fitting having 45 watt IP-65 protection, heat resistant glass, including driver and making necessary electric connection with 2.5 Sqmm twin core copper wire 1.5 long complete fixed in existing GI pipe bracket fixed to pole or on walls complete all as specified & directed. Make : C&S / Crompton / Philips or Havells as approved by GE.

Supply & Fixing sheet metal enclosure MCB DB's double door, vertical triple pole and neutral with MCCB incoomer DU 125U as incomming, 415 volts, 6 way, 25 KA breaking capacity and including MCB SPN 63 Amp -- 03 Number for out going with blanking plate wherever required and IP-43 degree protection making necessary incomming & outgoing electric connections complete all as specified & directed. Make : Legrand / Schneider / ABB / L&T

Supply & Fixing sheet metal enclosure MCB DB's double door [Acrylic], double pole and neutral, 240 volts, 12 way with 200 Amp rated bus bars, 10 KA breaking capacity with blanking plate wherever required and IP-43 degree protection making necessary incomming & outgoing electric connections complete all as specified & directed. Make : Legrand / Schneider / ABB / Indo Asian

Supply & Fixing sheet metal enclosure MCB DB's double door [Acrylic], double pole and neutral, 240 volts, 8 way with 200 Amp rated bus bars, 10 KA breaking capacity with blanking plate wherever required and IP-43 degree protection making necessary incomming & outgoing electric connections complete all as specified & directed. Make : Legrand / Schneider / ABB / Indo Asian

Supply & Fixing sheet metal enclosure MCB DB's double door [Acrylic], double pole and neutral, 240 volts, 6 way with 200 Amp rated bus bars, 10 KA breaking capacity with blanking plate wherever required and IP-43 degree protection making necessary incomming & outgoing electric connections complete all as specified & directed. Make : Legrand / Schneider / ABB / Indo Asian

Supply & Fixing MCB TPN 415 Volt, 63 Amps, 16KA breaking capacity complete all as specified & directed. Make : Legrand / Schneider / ABB / Indo Asian

Supply & Fixing MCB TPN 415 Volt, 100 Amps, 25KA breaking capacity complete all as specified & directed. Make : Legrand / Schneider / ABB / Indo Asian

Supply & Fixing MCB Single Pole & Neutral 240 Volt, 40-63 Amps, 'B' Series 10KA breaking capacity complete all as specified & directed. Make : Legrand / Schneider / ABB / Indo Asian

Supply & Fixing MCB Single Pole 240 Volt, 6-32 Amps, 'B' Series 10KA breaking capacity complete all as specified & directed. Make : Legrand / Schneider / ABB / Indo Asian

Supply & Fixing in repair single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with & including one number MCB SP 20/25 Amps complete all as specified & directed. Make : Legrand / Schneider / ABB / Indo Asian

Supply & Fixing in repair single modular AC box 240 volt with sheet metal enclosure with two pin & earth plug and socket complete with & including one number MCB SP 25 Amps complete all as specified & directed. Make : Legrand / Schneider / ABB / Indo Asian

Supply & Fixing in repair modular switch mounting sheet metal box for 6 moudule flush type switch complete as specified & directed. Make : L&T Cat Part No. CB91106WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair modular switch mounting sheet metal box for 8 moudule square flush type switch complete as specified & directed. Make : L&T Cat Part No. CB91208WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair modular switch mounting sheet metal box for 12-16 moudule flush type switch complete as specified & directed. Make : L&T Cat Part No. CB91110WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair modular switch mounting sheet metal box for 3 moudule flush type switch complete as specified & directed. Make : L&T Cat Part No. CB91103WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair modular switch mounting sheet metal box for 2 moudule flush type switch complete as specified & directed. Make : L&T Cat Part No. CB91102WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair cover plates with grid frame for six moudule complete as specified & directed. Make : L&T Cat Part No. CB91106WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair cover plates with grid frame for eight moudule complete as specified & directed. Make : L&T Cat Part No. CB91208WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair cover plates with grid frame for 12-16 moudule complete as specified & directed. Make : L&T Cat Part No. CB91112WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair cover plates with grid frame for 3 moudule complete as specified & directed. Make : L&T Cat Part No. CB91103WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair cover plates with grid frame for 2 moudule complete as specified & directed. Make : L&T Cat Part No. CB91102WM00 or equivalent make of Havells / Anchor / Bajaj or Legrand

Supply & Fixing in repair modular switch one way 6 Amp complete as specified & directed. Make : Havells / Anchor / Bajaj / L&T or Legrand

Supply & Fixing in repair modular switch two way 6 Amp complete as specified & directed. Make : Havells / Anchor / Bajaj / L&T or Legrand

Supply & Fixing in repair modular switch bell push two way 6 Amp for two modules complete as specified & directed. Make : Havells / Anchor / Bajaj / L&T or Legrand

Supply & Fixing in repair modular switch one way 16 Amp complete as specified & directed. Make : Havells / Anchor / Bajaj / L&T or Legrand

Supply & Fixing in repair modular socket outlet universal type 2 in 1, 2 pin / 3 pin 6 Amp complete as specified & directed. Make : Havells / Anchor / Bajaj / L&T or Legrand

Supply & Fixing in repair modular socket outlet universal type 2 in 1, 2 pin / 3 pin 6/16 Amp complete as specified & directed. Make : Havells / Anchor / Bajaj / L&T or Legrand

Supply & Fixing in repair modular fan regulator 5 step 120 watt 2 module ISI marked complete all as spicified & directed. Make : Anchor / Havells or Bajaj

Supply & Fixing moduler dummy / blanking plate 1-2 module complete all as spicified & directed.

Supply & Fixing in repair air ventilator fan 250 mm sweep with louvers copper wound motor suitable for 230 volt AC supply with plastic (ABS) body and necessary electric connection with ceiling rose with copper wire of suitable size complete all as specified & directed. Make : Havells model 'Venti Air' - DB / Bajaj / Orient

Supply & Fixing heavy duty UPVC terminal box of size 100 mm x 100 mm fixed / mounted on walls with PVC gully & screws of off white colour suitable including taking out old terminal box any type and making good to disturbed surface complete as directed.

Supply & Fixing in repair 2.8 mm thick top cover of plastic laminated sheet of required colour and shade suitable for and mounting of switchs, sockets, fan regulator etc of size 100 mm x 100 mm including steel screw & cup washer complete as directed.

Supply & Fixing heavy duty UPVC terminal box of size 100 mm x 150 mm fixed / mounted on walls with PVC gully & screws of off white colour suitable including taking out old terminal box any type and making good to disturbed surface complete as directed.

Supply & Fixing in repair 2.8 mm thick top cover of plastic laminated sheet of required colour and shade suitable for and mounting of switchs, sockets, fan regulator etc of size 100 mm x 150 mm including steel screw & cup washer complete as directed.

Supply & Fixing heavy duty UPVC terminal box of size 200 mm x 150 mm fixed / mounted on walls with PVC gully & screws of off white colour suitable including taking out old terminal box any type and making good to disturbed surface complete as directed.

Supply & Fixing in repair 2.8 mm thick top cover of plastic laminated sheet of required colour and shade suitable for and mounting of switchs, sockets, fan regulator etc of size 200 mm x 150 mm including steel screw & cup washer complete as directed.

Supply & Fixing heavy duty UPVC terminal box of size 200 mm x 250 mm fixed / mounted on walls with PVC gully & screws of off white colour suitable including taking out old terminal box any type and making good to disturbed surface complete as directed.

Supply & Fixing in repair 2.8 mm thick top cover of plastic laminated sheet of required colour and shade suitable for and mounting of switchs, sockets, fan regulator etc of size 200 mm x 250 mm including steel screw & cup washer complete as directed.

Material & Labour for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth wire 4 mm dia as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 15mm dia GI pipe light grade for protection of GI earth wire including PCC pit 1:2:4 type B-1 using 20mm crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm dai # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical complete all as directed by Engineer-in-charge and testing for required value complete. Note :- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt.

M/s A.KUMAR ELECTRICALS

M/S PANDEY TRADERS

M/S UJJAWAL ENTERPRISES

sethi tradres