Replacement of streetlight phase conductors dilapidated due to periodic rusting with new ACSR conductors in and around the seashore area roads of Ward no. 1,2,3,4,5,6,7,8,9,10,11 & 60 in MCC limits.

Replacement of streetlight phase conductors dilapidated due to periodic rusting with new ACSR conductors in and around the seashore area roads of Ward no. 1,2,3,4,5,6,7,8,9,10,11 & 60 in MCC limits.

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at workspot) NOTE:- Consolidated amount for both loading and unloading. - 8 Mtr RCC/PSCC Pole

RCC Pole - 8 Mtr Long, 115 Kg WL (Dwg No. BESCOM/GM/QS&S/05 Dtd 24.11.2018) as per IS-785

PSCC Pole - 8 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/49 Dtd 24.11.2018) as per REC Standards

Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.

LT 4 Pin Cross Arm as per IS-1977

LT 2 Pin Cross Arm as per IS-1977

Fixing of 2/4 Pin cross arm with Insulator and Braces fixing/V-Shape/Horizontal cross arm for DC Line

including Brace and Insulator fixing (Without Single Top Support)

RCC Pole Clamp as per IS-1977

PSCC Pole (200 Kg WL) Clamp as per IS-1977

Guy Clamp as per IS-1977

Full Threaded Bolt & Nut as per IS-1367 (M16) - GI

Turn Buckle (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)

Anchor Rod using 12 mm rounds/Guy Rod

7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM as per IS-2141

1.1 kV Ceramic Pin Insulator (Shell only) as per IS-1445

1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator as per IS-7935

No. 8 Strain Insulator as per IS-1445

LT ST Support 50x6 mm Flat

Releasing & re-fixing of HT/LT Single Top Support

Fixing of HT/LT Single Top Support

Releasing & re-fixing of 2/4 Pin cross arm with Insulator and Braces fixing

Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM as per IS-398 (Part - 2/1996)

Releasing of Rabbit Conductor

Digging of Pit for GUY SET

Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

Stringing of Rabbit ACSR conductor, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.