Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹39.3 L+₹1.1 L (2.89%)Rejected-Finance | L2 | Rejected-Finance Being L2 bidder | |
| 3 | L3₹41.8 L+₹3.7 L (9.64%)Rejected-Finance | L3 | Rejected-Finance Being L3 bidder | |
| 4 | L4₹42.9 L+₹4.7 L (12.3%)Rejected-Finance 11 71 KAVERI PATH MANSAROVAR JAIPUR | JAIPUR | JAIPUR | RAJASTHAN | L4 | Rejected-Finance Being L4 bidder | |
| 5 | L5₹43.9 L+₹5.7 L (14.9%)Rejected-Finance | L5 | Rejected-Finance Being L5 bidder |
Tender Value
₹45.0 L
EMD Value
₹90,100
Closing Date
29 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (W)
GE (W) HISAR HISAR MIL STN PIN-125006
CA NO. GE (W)/HSR-62/2023-24 REPAIR TO BALCONY CHAJJA FACIA PLASTER OF ZONE B AT HISAR MIL STN UNDER GE (W) HISAR
2024_MES_638717_1
CA NO. GE (W)/HSR-62/2023-24
Open Tender
Civil Works
Item Rate
270 days
HISAR
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE (W) HISAR
₹90,100
Yes
GE (W) HISAR
27 Mar 2024
23 Jan 2024
2 Mar 2024
23 Jan 2024
29 Feb 2024
15 Feb 2024
24 Jan 2024 - 31 Jan 2024
31 Jan 2024
Amount
Demolition of RCC in floors (other than ground floors), beams staircases, landing, chajjas, slab and similar suspended work, including removing out of MD Land complete all as specified and directed. Note : Demolition work is to be carried out in portion of building up to three storey,hence necessary scaffolding and safety measurs required to support adjacent portions of bldg are deemed to be included in quoted rates.
M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6).including demoliton existing article/item/portion etc complete all as specified and directed.
Brickwork with fly ash' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4. including dismantling/demolition of existing wall any type(RCC/PCC or brick) complete all as specified and directed.
M&L RCC M-25 (Design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L RCC M-25 (Design mix) as in Beams, columns and the like complete all as specified and directed.
M&L RCC M-25 (Design mix) as in Chajjas, cantilevers, bressummers, lintels over and upto 1.5m span and the like complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia complete all as specified and directed.
Description all as per item No 7.00 here-in-before but 6 to 8mm complete all as specified and directed.
Description all as per item No 7.00 here-in-before but as in strips, spacer and binder, 5mm to over and upto 10mm dia complete all as specified and directed.
M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.
M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface complete all as specified and directed.
Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 by adding WPC @ 3% by wt of cement finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid seperately. work is to be carried out in portion of building up to three storey,hence necessary scaffolding and safety measurs required to support adjacent portions of bldg are deemed to be included in quoted rates.
M&L rendering 5mm thick plaster on concrete surfaces as in ceiling in CM (1:3) including finish even and smooth with out using extra cement complete all as specified and directed.
M&L two coat of cement base paint over a coat of primer including preparation of newly plaster surface complete all as specified and directed.
M & L one coat of cement base paint on old surfaces of walls including preparation of surfaces complete all as specified and directed.
M & L two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.
M & L one coat of oil bound distemper on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.
M&L three coat of white wash on ceiling surface including preparation of newly plaster surface complete all as specified and directed.
Description all as per item No 20.00 here-in-before but one coat white wash on old ceiling surface complete all as specified and directed.
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 (Gde E-165) including dismantling existing RCC parapet/ items and removing from site complete all as specified and directed. Note : Reinforcement obtained from demolition shall be carried in Schedule of credit.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe-290(Gde E-165) taking down of existing similar item and repair by using mechanically or hand tools as required and replace damage parts/portion the existing item before refixing the same complete all as specified and directed.
M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over one coat of redoxide primer area Exc 10 cm width or girth complete all as specified and directed.
M&L preparing old steel surfaces and applying one coats of synthetic enamel paint area Exc 10 cm width or girth complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.
M&L for chequered cement concrete tiles heavey duty PU mauled with coloured 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry with coloured cement and pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:6, including 50mm thick PCC (1:5:10) using 20mm graded stone aggregate as sub base complete all as specified and directed.
M&L for 50mm thick PCC (1:2:4), Type B-1 using 20mm graded stone aggregate as floor finishing even and smooth without using extra cement etc complete all as specified and directed.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8 ), using 40mm graded stone aggregate as in sub base of floor finishing even and roungh complete all as specified and directed.
M&L for machine cut kota stone slab 20-25mm thick in floor / steps,r laid over and including 20mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and directed. Note : Kota stone shall be providedonlt in one piece in steps (Riser/ tread)
Description all as per Item No. 32.00 above but kota stone slab 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and directed. Note : Kota stone shall be providedonlt in one piece in steps (Riser/tread)
S&F, 50mm dia PVC rain water pipe of pressuresingle socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified & directed.
Drilling holes in RCC , brick work and cement concrete etc upto depth 150mm by using mechanical dril machine for fixing bolts, TMT bar etc in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of synthetic emael paint complete all as specified and directed.
Supply and Providing precast cement concrete ( 1:3:6) type C-0 using 12.50mm stone aggregate as in louvres and jallies 25mm thick (measured solid), including all mouldings but excluding frame set in cement mortar (1:6), including dismantling existing jallies/louvers of any description and fixed in any position complete all as specified and directed. Note : Pre cast frame shall be measured separately and paid.
Providing precast cement concrete (1:3:6) Type C-1 using 20mm graded stone aggregates and set in CM (1:6) in window or door cills, lintels, bressumers, teps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars ,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings , throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed.
Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC coloumn, chajjas, slab, beam, lintel etc removing all loose rust/scale from exposed reinforced bars by using wire brushes and sand paper and reinforced with IRC fabric 50mmx50mmx12 gauge to reinforcement and apply concrete bonding primer uniformly to exposed surfcae and apply cement sand concrete mortar (1:3:1) (1 part 1 cement : 3 Part sand: 1 Part 6mm coarse Aggregate) Average Thickness shall not less than 20mm and removing debris complete all as specified and directed. Note : work is to be carried out in portion of building up to three storey,hence necessary scaffolding and safety measurs required to support adjacent portions of bldg are deemed to be included in quoted rates.
Supply only IRC 50mmx50mmx 12 gauge mesh complete all as specified and directed.
Complete removal of existing treatment on walls and roughening surfaces of old plaster by picking sweeping clean and washing down with water to remove dust etc to recceive rough plaster complete all as specified and directed.
M&L for 10mm thick cement plaster in CM 1:4 as in backing coat for rough plaster complete all as specified and directed.
M&L for Rough cast plaster with rough mixture consisting of crushed stone or fine gravel agg, size 6 to 12mm mixed with course sand and cement in the ratio of 1:1:1 shall be applied and finished even on external wall complete all as specified and directed.
M&L for Dubbing out in CM (1:6), Average thickness of 20mm thick on irregular face of walls /Ceiling complete all as specified and directed.
S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore fixed in repairs complete all as specified and directed. Make prayag
S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 15mm bore fixed in repairs complete all as specified and directed. Make prayag
S & F in repair SS wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters and aluminum windows etc including necessay arrangements like welding, beading to securing wire mesh etc complete all as specified and directed.
S&F in repair mild steel window handle left/right 150 mm complete all as specified and directed.
S & F in repair mild steel window peg of minimum 200 mm length complete all as specified and directed.
Hacking out old broken glass exc 1.5 sqm (any thicknes, size and description) from wooden / metal frames glazed with putty or fixed with beads complete on any storey of the bldg complete all as specified and directed.
M & L for preparations of previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.
M&L taking down Aluminium door of size exc 1.50 sqm but n.exc 2.50 sqm & refixing the same after carryout necessary repair work /securing/ adjustments the loose parts and Replaced the damge parts with new including necessary joining cleats,glazing clips, ruber neoprene packing ,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed,
M&L taking down Aluminium door of size exc 2.50 sqm but n.exc 3.50 sqm & refixing the same after carryout necessary repair work /securing/ adjustments the loose parts and Replaced the damge parts with new including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.
Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts,all set in stiff white lead, bolt n. exc 25mm in complete all as specified and directed.
Demolition of Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in padding ,levelling course and the like finish even and Fair 50mm average thickness or as required at site including preparation of RCC roof surface(old or new) with wire brush , drying and cleaning top remove loose particles, filling the cracks by crack filler complete all as specified and directed.
S&F 40mm thick brick tiles laid on 15mm thick screed of cement mortar(1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on PCC padding complete all as specified and directed.
Description all as per item No. 58.00 above but except bricks tiles complete all as specified and directed. Note : Brick tiles to be used obtained from item No. 55.00.
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each resecuring, easing and adjusting and refixing in the same opening complete all as specified and directed.
Dismantling water tanks exceeding 250 and not exceeding 500 litres capacity and refixing after cleaning complete all as specified and directed. Note:- Disturbed surface should be make good by PCC using 20 mm graded stone aggragate.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, by using bleaching powder etc. of capacity exc 250 ltr but n.exc 500 ltr complete all as specified and directed.
S&F PVC cabinate with 5 thick mirror of size 300mm x 450mm complete all as specified and directed.
S&F in repair 15 mm bore CP hot and cold Mixer with arrangement of teliphonic hand shower complete all as specified and directed.
M&L for Flush pointing nIn CM( 1:3) to brick on edge pavings , to bricks laid flat or brick tiles in pavings /Roof complete all as specified and directed.
S&F Universal shield cover for water storage tank made of mild steel sheet, MS flat with mild steel nut and bolt as specified by manufacture complete all as specified and directed. Make:- Dhakkan wala and equilent
Shiva Constructin Co.
HANS ENGINEERS
Balaji Construction Co.
M/S RAJESH KUMAR & SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .