REPAIR TO FALSE CEILING, GALVALUME SHEET AND OTHER CONNECTED WORK IN SMC AUDITORIUM, COMMUNITY HALL AND CERTAIN OTHER BUILDING IN DOMESTIC AREA AT AF STATION YELAHANKA

Amount

Dismantling of Asbestos cement corrugated or semi corrugated sheets in roof coverings, all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed

S&F mild steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPs as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Dismantling of old Ceiling boards (Fibre, pulp, insulation, etc) or insulation boards /slabs blankets, including cover fillets and frame work all as directed.

S&F of Armstrong Board 12mm thick in ceiling fixed with screws all as per manufacturer’s instructions complete all as specified and directed.

S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified and directed.

M&L for Gypsum Board false Ceiling: Providing, fabrication and fixing in position of false ceiling at a height of 8 to 10’-0” from floor (or the height will be decided on the spot as per site conditions) by fixing 12 mm Th. Gypsum Board sheets on frame work of GI sheet section. The main runners of 22-gauge GI sheet and cross runners of 24-gauge GI sheet must be framed to form a mesh of 2’0”x2’0” c/c. The Gypsum Board must be fixed to the GI frame and joint to be properly filled in with POP paste and paper tape to get a levelled smooth ceiling. Recessing of the Gypsum Board for light fixtures must be done along with extra frame work of GI sheet section to hold the concealed light fixtures etc. including cost of two or more coats to give an even shade of plastic paint on ceiling with putty work complete with designer ceiling (with part ply, laminate and cover) as required complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 & 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M&L double charged Vitrified tiles of light shade 10mm thick and area of each tiles not exceeding 0.36 Sqm, For flooring laid with spacer and joints grouted with epoxy filling material over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L double charged Vitrified tiles of light shade 10mm thick and area of each tiles exceeding 0.42 but not exc 1.00 Sqm, for flooring laid with spacer and joints grouted with epoxy filling material over and including15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36Sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all complete all as specified and directed.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exceeding 0.11 Sqm and not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M&L Glazed coloured Ceramic tiles of size 450X300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over and including 10 mm thick plaster in CM 1:4 finished complete all as specified and directed.

M&L Glazed coloured Ceramic tiles of size 300x600x10mm thick mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over and including 10 mm thick plaster in CM 1:4 finished complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) all as directed

M&L for 75 mm thick PCC 1:3:6 type C2 (using 20mm graded stone aggregate) as in plinth protection and paving finishing surface even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone masonry built in CM including all quions all as specified and directed.

Taking down cement plaster from walls of any description all as specified and directed.

M/L for precast cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) block masonry with solid blocks exc 10cm in width and setting in CM 1:6 complete all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall complete all as specified and directed.

M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed.

M&L for applying two coats of distemper (OBD) including Preparation to the new surfaces of wall complete all as specified and as directed

Preparation of newly plastered surfaces and applying two coats of cement base paint on walls including priming surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wall by washing rubbing down and stopping of distempered surfaces on walls, removing nails making good holes cracks etc and applying one coat of oil bound distemper on walls complete all as specified and directed.

M&L for complete removal of existing treatment of wall surface and applying two coat of oil bound distemper all as specified and directed.

M&L for Preparation of old surfaces of ceiling and applying one coat of oil bound distemper all as specified and directed

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed.

Taking down door chowkats or frames exceeding 1.5 sqm and not exceeding 4 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm, all as specified and directed.

Taking down shutters of any description n exc 1 Sqm all as specified and directed.

M&L Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) ¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete as specified and directed.

S&F powder coated anodised aluminium frame and shutters with all fixing arrangements for doors, windows and ventilators with one or more rebates including jointing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and rollers complete all as specified and directed. Note : Powder coating shall not be less than 50 microns.

S&F powder coated Anodised aluminium Door shutters, aluminium section weight 0.55kg/mtr including necessary joining cleats, glazing clips rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. Note : Powder coating shall not be less than 50 microns.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 65 mm Single Rebated ,made from WPC material comprising of virgin PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibres ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in position with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter complete all as specified and directed. MAKE:- BLACK COBRA/SMP Impex/Sintex

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) MAKE:- BLACK COBRA/SMP Impex/Sintex

S&F Continuous(piano) hinges, mild steel, bright finish of electrogalvanized 30 mm width of flap all as specified directed.

M & L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and the prelaminated side with different design and other side plain white of density not less than 600kg/cum the 18mm board should be 100% lead free ,water proof, termite proof and moisture/weather proof and good screw holding capacity including Necessary fittings like auto closing hinges 35mm of 0 crank each shutter 03 nos, 200 mm long SS handle each shutter 02 nos and 600mm x 40mm x 40 mm oval type hanging rod and locking arrangement etc all as specified and directed Make - BLACK COBRA /SMP IMPEX/Sintex

M & L in repairs for 18/19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face fixed all as specified and directed.

S&F 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) and fitted to chowkats complete all as specified and directed.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 200mm of extruded section complete all as specified and directed.

S&F for aluminium handle 150mm cast type anodised all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beads all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n exc 0.50 Sqm in each pane all as specified and directed.

S&F figured glass pin head type ordinary quality 4mm thick and glazing with oil putty in square n exc 0.50 Sqm in each pane all as specified and directed.

S&F sheet glass ordinary quality 4.8mm thick as in window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprene gasket all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

S & F mild steel framed work as grills conforming to Fe 290 Gde E-165 all as specified and directed.

M&L for preparing new steel surfaces of any description and applying two coats of Synthetic Enamel Paint over one coat of red oxide zinc chrome to steel surface all as specified and directed.

S&F in repairs decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia all as specified and directed

S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 with fittings on walls / ceiling or laying in floors complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. Make : Cera/ Parryware/Neycer

S&F in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190X550X430mm including fixing of 32mm low density polymethine pipes (LDPE)of pressure rating 6kg/cm2, coupling all as specified and directed Make: Jaquar/Cera/Kohler

S&F Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified. Make Cera/Jaquar/Kohler

S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chromium plated hanging type device all as specified and directed. Make : Cera/Parryware/Neycer

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including p'trap and provision of cement concrete for good making surface complete all as specified & directed by Engr-in-charge . Makle Cera/Jaquar/Kohler

Supply and Fixing in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe all as specified and as directed. Make : Cera/Parryware/Neycer

Supply and Fixing in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with pedestal including brackets all as specified and as directed. Make : Cera/Parryware/Neycer

Supply and fix pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipe and fixed completed all as specified and directed. Make : FLR-CHR-5167NB of make "JAQUAR" or equivalent in Kohler/Cera

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified. Make : FVR-CHR-29037 of Make "JAQUAR" or equivalent in Kohler/Cera

S&F in repair bib tap of PTMT any colour 15mm dia all as specified and directed.

S&F in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified and directed. Make : Cera/Jaquar/Ess Ess.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make : Cera Model F2002161 or equivalent in Jaquar/ESS ESS

S&F in repair 15mm dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Make : ARI-CHR-39053 of make "JAQUAR" or equivalent in Cera/Kohler

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed.

Supply and Fixing of 32mm waste pipe for wash hand basin all as specified and as directed

S & F in repairs CP Shower with arm 15 mm size, arm 195 mm long with bend of 45 degree with flange as specified and as directed. Make : Cera/Jaquar/Ess Ess.

S&F in repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats all as specified and directed. Make : Cera/Jaquar/Ess Ess

S&F in repairs of CP health faucet of Cera make including necessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make : Cera F-8030103 or equivalent in Jaquar/Ess Ess

S&F Corner glass shelf large, 300x300mm with assembly of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed.

S&F PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement all as specified and directed.

S&F in repairs PVC(SWR) Pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors or wall all as specified and directed.

S&F in repairs PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors or wall all as specified and directed.

S & F PVC (SWR) bends 75 mm dia in any radius all as specified and directed.

S & F PVC (SWR) bends 110 mm dia in any radius all as specified and directed.

S&F in repairs CP grating size 100mm all as specified and directed.

Supply and Fix wall mounted cloth drying hangar of 4.5 feet length consisting of four anodized aluminium pipe of drying rod all as specified and directed. Make: Mount-it 18 of Easy dry or equivalent

S&F Vitreous china urinals, half stall with spreader hole and fixing Accessories of size 355x340x535mm including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified. Make Jaquar USR-WHT-13261H or equivalent in Cera/Kohler

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charge Make : Universal/Dyna/Everlite

S&F fully automatic urinal pot of size 295mm x 325mm x 575mm Ceramic Star white wall hung Automated Urinal with sensor all as specified and directed per direction of Engineer-in-Charge. Make ;-Hindware 60021 or equivalent in Jaquar/Kohler

VP DEVELOPERS AND CONTRACTOR (BID ID -3171328)

EURO ENTERPRISES (BID ID -3165186)

G K CONSTRUCTIONS (BID ID -3165337)

SRI AYYAPPA ENTERPRISES (BID ID -3169847)

chowdeshwariconstructionco (BID ID -3171154)