Supply, Fabrication and Installation of Motorized sliding gate at main entrance of NCBS

Amount

"Supplying, Installation, assembling, hoisting / erecting and fixing in position MS sliding gate with motar, Italian make, with necessary Slding wheel, Nylon roller sets, required ack assembly, Photocell, Flashing light and sensor assembly, Receiver and remote assembly all as per manufacturer specifications and as directed by Enginner -In Charge. Note: The Gate should be fabricated and designed as per Architectural Drawing and as per the direction of EIC. Prior approval and shop drawings needs to be submitted to take approval before commencement of work." Detailed Specification "Providing, fabricating, assembling, erecting & fixing in position Motorised Single Leaf mild steel Sliding Gate complete as per specification given below: Clear Width of appx 7000mm & overall width of appx 8130mm of Over all Height 1950mm appx. Gate clear heighjt 1500mm Gate Design: As per client's attached drawing & Standard manufacturer specifications and as directed by EIC." Gate Frame: "Standard Mild Steel hollow tubular section, torsion free fully welded unit consisting of : 100mm*75mm*3.0mm M.S. pipe top horizontal & vertical profile 100mm*75mm*3.0mm M.S. pipe bottom horizontal profile Infill: 50mm*25mm*3.0mm M.S. pipe horizontal profile Infill: 50mm*25mm*3.0mm M.S. pipe vertical profile and the distance between inner vertical is approx. 100 mm c/c " Note: The infills are to be fully welded between the upper and lower gate frame Bottom Rail: Required C channel & 20mm round polished bar Wheel Bracket Height, 95mm, width 100mm, Depth 75mm with 2no bearing, 1no shaft, Bracket thickness 8mm. Bottom Rollers Italian make Galvanised Wheels 100-120mm dia with ball bearings and axle with lubrication point, 50mm depth, shield bearing, 27mm curved type. Guide Post "Full height Column Galvanised adjustable upper guide brackets with guide post constructed from a steel square hollow section of 150x150x4mm profile Guide Rollers: Nylon Roller mounted on both side of column providing lateral support & smooth movement to the gate leaf. Nylon roller of 65mm length, 60mm dia, Bolt: 135mm x12mm. Fabricated to assemble with 8mm thick flat. Safety post : Safety strike with M.S. Post made of 150x150 x 4mm profile section on both ends" Overlap of appx 1300mm is considered Note: Considered Bottom track assembly, Guide Post, Sliding rollers, Safety strike post, Safety strike & Wheel Clamp, additional three station push button, Pair of reverse safety photocells, Pair of Photocells with anodised aluminium vertical mountings Flashing light , Sliding Bracket as per manufacturers specifications standards and as directed by EIC. European Electromechanical actuator - BENINCA Technology as below mentioned specification with BULL20HE with Motor IP 55 Drive unit : Rack driven rugged and powerful drive unit with integral electronic control unit Travel control system : Control unit with limit switches to sense open & close positions, "Capacity: 2200 kg.Duty Class: Intensive use Working cycle : 80% Power Supply Vac 230 V single phase ,230V, 50Hz , Absorption: 3A Torque: 40 Nm Opening Jogging : 80% Release system for manual opening: Key operated Product dimensions: and remote operation with remote 330 x 210 x 300 mm Rack: Imported galvanized rack, duly hardened and tempered Control Switch: Three Station Push Button- 2nos. Warranty: 2Years. " "Note: 1) CE marked according to the European Machinery Directive 2006/42/CE and type tested according to standard European Norm 13241-1 2) Could be manually operable in case of power failure 3) Time adjustments, Partial opening, automatic closing, step by step control, stop safety, reverse safety ensured."

SHILPA ENTERPRISES (BID ID -3247854)