Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹5,120
Closing Date
15 Apr 2025, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
Expenditure
General
61
2 conditions
Railway reserves the right to purchase Bulk/Entire quantity from the Manufacturer or their Authorized Agents/Dealer. Manufacturer takes the full responsibility for the quality of the material including warranty obligations and the inspection against order of Railway. Tenderer must mention Make/Model/Brand of the item being offered and there must not be any ambiguity of Make/Model while quoting the offer. Authorized Agents/dealer must attach the Tender specific Authorizations along with the offer otherwise offer will be summarily rejected. Please refer to Para 2.2 of Electronic Tender condition ITT_Rev_1.21_April_2024 along with all correction slips.
Tenderers not uploading/attach the requisite documents with their offer may note that their offers are liable to be rejected without any further reference.
11 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
FOR destination rates may be quoted as material is required at the premises of consignee.
Purchaser reserves the right to issue any Corrigendum to the tender up to five days prior to the due date of opening of the tender, excluding the date of opening. Tenderers are also advised, in their own interest, to regularly check, till the opening of the tender the website www.ireps.gov.in to see whether any such corrigendum to the tender has been issued or not and for submitting their e-bids or revising their e-bids.
Purchaser reserves the right to cancel the tender for full or part quantity without assigning any reason. The rates quoted by the tenderers for the full quantity would be taken as valid even for part quantity
1 location across Haryana · 1 Set total
One Rake set of Hardware
61255433
61255433
Open - Indigenous
Goods
Haryana
₹0
₹5,120
15 Apr 2025
2 Apr 2025
1 item · 1 Set total
One Rake set of Hardware (Group-2) for VB/TS consists of 1.HEXAGON SOCKET HEAD CA P SCREW ISO 4762- M10 X 40-10.9 -16nos SEE NOTE-1,3 2.HEXAGON SOCKET HEAD CAP SCREW ISO 4 762- M8 X 25-8.8 - 144 nos SEE NOTE-1,4 3.HEXAGON SOCKET COUNTERSUNK HEAD SCREW-ISO1064 2-M12X100-8.8-256 nos SEE NOTE1,4 4.FITBOLT DIN 609- M16x2x80 - 10.9 -256 nos SEE NOTE-1,2,3 5 .WASHER-ISO 7089 - 10-300 HV - 256 nos SEE NOTE-1 6.WASHER-ISO 7089 - 12 - 300 HV -1848 nos SE E NOTE-1 7.WASHER-ISO 7089 - 14 - 300 HV -512 nos SEE NOTE-1 8.WASHER-ISO 7093-1-12- 300 HV - 136 nos SEE NOTE-1 9.WASHER-ISO 7089 - 22 - 300 HV -512 nos SEE NOTE-1 10.WASHER-ISO 7089 - 24 - 300 HV -960 nos SEE NOTE-1 11.WASHER-ISO 7089 - 20 - 300 HV -1920 nos SEE NOTE-1 12.WASH ER-ISO 7089 - 16 - 300 HV-2916 nos SEE NOTE-1 13.WASHER- EN 28738 -33-200 HV -256 nos SEE NOT E-1 14.WASHER- EN 28738 -36-200 HV -256 nos SEE NOTE-1 15.WASHER ISO 7093- 1 -16 -300 HV -76 nos SEE NOTE-1 16.SPLIT PIN -ISO 1234-8 x 45-St -128 nos SEE NOTE-5 17.SPLIT PIN -ISO 1234-8 x 63- St -256 nos SEE NOTE-5 18.PARALLEL PIN IS:6689/ISO 8734-10x24-A-St -128 nos 19.HEXAGON HEAD S CREW PLUG DIN 910-M20 X 1.5-ST -72nos SEE NOTE-1 20.SPLIT PIN ISO 1234-6.3 X 40-st -64nos SEE NOTE-5 21.GASKET DIN 7603-A 21 X 26-CU-72nos NOTE: 1. Zinc flake coating (Geomet321 or equivale nt) with top coat, without any hexavalent chromium, without any integrated or separately added lubric ant. Minimum salt spray test life of 1000 hours is to be ensured. 2. Fit bolt shall have coarse thread wi th 2mm pitch. 3. Zinc electroplated to grade A3L of annex-E of IS: 1367 (part eleven). [ Warranty Per iod: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LIFTINGSHOP/RCNK, NR | Haryana | 1.00 Set |
| Total | 1 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .