SPECIAL REPAIR, REWIRING TO CERTAIN BUILDINGS AND PROVN OF SEPTIC TANK AT TANGDHAR UNDER GE 874 EWS.

Amount

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering/wall etc complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws complete all as specified and directed.

All as per item No. 2 herein before but plain sheet complete all as specified and directed.

Dismantling wall and ceiling board of any description including cover fillets complete all as specified.

M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in wall/linings complete all as specified and directed.

M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in ceiling etc complete all as specified and directed.

M&L for plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 3 sqcm & n exc 6 sqcm, second class soft wood (Kail) clean sawn complete all as specified and directed.

M&L for plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 13 sqcm & n exc 25 sqcm, second class soft wood (Kail) clean sawn complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

All as per item 9 above but except bricks.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down of cement plaster of any description including racking out of joints hacking for keys and scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of old/new surfaces of plaster/concrete/plain asbestos cement sheet surfaces etc of any description, over 10cm in width or girth,not otherwise described and applying two coats of cement based paint complete all as specified and directed

M&L for mild steel work Fe -410-W (gde-E-250) Quality A Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Dismantling of timber scantlings 40 sq cm and over in sec, in any position, in unframed/ framed work complete all as specified and directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base flooring complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 as in sub base under floor and finished rough surface complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm and n. exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed.

Taking down chowkhats or frame exc. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame n.exc. 1.5sqm each with Shutter (without taking out shutters from the frame) complete all as specified and directed.

M&L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds etc, glazed with putty or fixed with beads complete all as specified and as directed.

S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and directed.

M&L for glazed and Skeleton shutters 2nd class soft wood, open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, 30mm thick shutter for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (b). complete all as specified and directed.

M&L for two coats of synthetic enamel paint including cleaning dusting of new or previously untreated, priming surfaces of wood of ply wood base surfaces over a coat of pink primer for wall, door, window, ventilator and ceiling not otherwise described over 10cm width or girth complete all as specified and as directed.

S&F for 100mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F 200mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified and directed.

M&L for Aluminium handles cast type anodised 100mm long complete all as specified and directed.

S&F 100mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminum handles, cast type, anodized 150mm long complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

S&F vitreous China wash basin, white, flat back, size 550x400mm including waste chain & plug and porcelain stopper and including brackets, waste pipe, etc complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked).

S&F Pillar tap 15mm bore cast copper alloy, with capstan head chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Taking up or down steel tubing and connections complete all as specified and directed.

S&F GI steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm complete all as specified and directed.

M&L for walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Description all as per item 47 above but except stone.

M&L for 15mm thick rendering on fair faces of brick work/concrete surfaces in CM 1:6 finishing the surface fair & even complete all as specified and directed..

M&L for 75 mm thick PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate) as in plinth protection or sub base complete all as specified and directed.

M&L for chequered cement concrete tiles of size 20 Cm X 20 Cm and 25 mm thick, set, jointed and pointed in neat cement slurry in floor with grey cement and no pigments with over and including 25 mm thick screed bed in CM (1:4) complete all as specified and directed.

Dismantling wrought iron or mild steel /angle work of any description or in any position complete all as specified and directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement Mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 Nominal Mix using 20mm graded stone aggregate as in coping, channel, benching of manhole laid to shape and slope and finished even and smooth using extra cement including weathering, throating and necessary form work complete all as specified and directed.

Excavation over areas not exc 1.50m in depth & getting out in soft/loose soil complete all as specified and directed.

All as per item No 58 above but exc 1.50 m deep.

Excavation in trenches for foundation etc not exc 1.5M wide, exc 1.5M deep and not exc 3.0M deep and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for RCC nominal mix (1:2:4) type B-0 using 12.5 mm graded aggregate as in Beam, lintels, over 1.5 m clear span complete all as specified and directed.

M&L for RCC (1:2:4), Nominal mix, type B-1, using 20 mm graded aggregate as in roof slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, deck slabs in selves and the like complete all as specified and directed.

M&L for 15 mm thick Rendering in CM 1: 3 on fair faces of Brick work or concrete surfaces and finished even & smooth with out using extra cement complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F mild steel small articles as in rungs in septic tank etc complete all and as specified.

M & L for Formwork to soffit of roof slab not exc 20cm thick, supported on walls, rough finished surfaces complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material n-exc 50m and depositing where directed at a level n-exc 1.5m above the starting point complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed.

M&L for construction of Soakage well of size 3.00 m dia at bottom and 3.00 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling or mass concrete complete all as specified and directed.

M & L for loose filling with broken bricks aggregates of gauge 80 to 150 mm in soak well complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from 1.6 mm thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 78 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 78 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 78 herein before but wiring with 4 sqmm copper wire ( FR-LS-H) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S& F of Socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.

S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed.

Supply and fix ceiling rose with earth terminal 2/3 connection, PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection/ PVC/ polycarbonate, isolated body. complete all as specified and directed.

M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

S&F 09W/10W Bulk head luminiares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' curve series, complete all as specified and directed.

S & F of MCB SPN, 240 volt, 32 to 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size 16 Sqmm 2 core including service bracket complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

S & Fixing of 20 W LED 6500 K Building Security Lights with best in class design & robust heat sink along with class leading IP, IK & surge protections for long lasting performance complete all as specified and directed.

Supply and fixing of on load change over Switch 63 Amp, 2 Pole 3 Phase, Capacity (as required as per site requirement) complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 12 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed.

All as per item No 78 herein before but wiring with 2.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed.

M/S MANZOORAHMAD LONE (BID ID -3361428)

GH MOHD SHAH AND CO (BID ID -3364709)

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3366467)

patriotic builders (BID ID -3365873)

Bidder Name

patriotic builders

MIR HUSSAIN AND SONS

GH MOHD SHAH AND CO

M/S MANZOORAHMAD LONE

M/S MUNEER AHMAD WANI CONSTRUCTIONS