Improvements to Grampanchyat office Building at Villages karnoor Tal Kagal Dist Kolhapur (Nagari Suvidha Yojana 2025-2026)

Supply, fixing and installation of four milimetre thick aluminium composite panel of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The aluminium composite panel should be made out of thermoplastic core of low-density polyethylene LDPE (100 percent virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 milimetre thick, total thickness of aluminium composite panels not to be less than four milimetre, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70 percent kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 milimetre X 25 milimetre X 3 milimetre thick aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 milimetre X 1200 milimetre and fixed to the building structure as per design through 50 milimetre X 50 milimetre X 5 milimetre mild steel angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate) Item / Page No : 235 / 300 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing fixing Fully glazed structural (Colour as per Specification) 2.5x "x 1.5 extrysuib sectibs fir stryctural glazing weight about to 2.2 kg per 12 feet with 6 mm clear transperent glass one way reflective glass of saing goblin or asal specification) is sticked on section with sticking make colour as per glass on section with the help of 6x6 mm spacer tape of laim make or nortion and silicon sealent 995, 795 and 789 do corning will be used the aluminium sections will by secured to the masonry finish with mild steel or aluminium which will be powder coated with anchor fasterner in crome finishe and other necessary hardware accessories in SS Handle will by provided for openable window including scaffolding charges ( Before execution samle should by got approved from Engineer in charge) Rate as per R. A. No.1 Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per Indian Standard : 4923 YST 310 grade produced from iron ore and blast furnace route, excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and painting complete. Item / Page No : 12 / 130 Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 milimetre diameter mild steel tube, placed 1.5 metre center to centre, horizontal and vertical tubes joint with cup and lock system with mild steel Tubes, mild steel tube challis, mild steel clamps and staircase system in the scaffolding for working platform, excetra and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building, etc wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen, excetra complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. Item / Page No : 42 / 217 Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge.

Providing and fixing 90 centimetre X 60 centimetre granite name plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete. Item / Page No : 12 / 213 Specification No : Bd.W.7 Spec. Page No : 586 - 587

Add insurance 0.50% Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Add G.S.T. 18% Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.