CA NO CWE/PAT/T-19/2020-21 SPECIAL REPAIR TO BUILDING NO T-02 TO T-07 AND T-32 UNDER GE SOUTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only integral liquid water proofing compound all as specified & as directed by Engineer-in-Charge.

Preparation of new plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/ balcony/ ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Applying 02 coats of interior emulsion paint (white shade) @ 12 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.

S&F factory made flush shutters 35mm thick, confoirming to IS : 2202 (part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneer on both faces of shutters compete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and including painting with one coat of pink primer and two coats of synthetic enamel paint and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate - 1 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick PVC celuka Board wooden finish pre-laminated on one side and plain on other side below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

S&F powder coated aluminium glazing/ doors & shutters made out of aluminium anodised section 101.60x44.75x1.75mm for chowkats or frame & shutters made of size 81.25x38.10x1.50mm for side rails, top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick tinted glass above the middle rail, and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including required nos. of pivots/hinges and brass mortice lock (four lever) and two Nos keys complete all as specified and directed by Engr-in-Charge including supply and fixing the following items: (a) Stainless Steel 304 Grade Finished Butt Hinges 150mm - 4 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf (d) Alm door closer hydraulically regulated, designated No 3 universal type, upto 1 m width of shutter - 01 No per leaf Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf.

S&F powder coated 50 microns extruded aluminium doors & shutters made out of section 63.5 x 38.10 x 1.29mm for chowkats or frame & shutters made of size 44.45 x 44.45 x 1.29mm for side rails and middle rail, 114.3 X 44.45 X 1.29mm for side rails, top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) above and below middle/lock rail, and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 Nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 Nos per leaf (d) Alm door closer hydraulically regulated, designated No 3 universal type, upto 1 m width of shutter - 01 No per leaf Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified.

M&L for single charge, vitrified, stainfree & scratch resistant, joint free, Premium (1st) quality straight edge coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern as approved, set and jointed over & including 20mm th screed bed in CM 1:4 and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick in any pattern of light coloured tiles as approved, on vertical surfaces such as skirtings, set & jointed in neat and pointed in white or coloured cement to match, as in skirting not 150mm high etc. in any pattern of light or dark tiles as approved to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) complete all as specified and directed. Make : Johnson/Kajaria//Nitco/Somany as approved by AO

M&L for Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering. Make : Johnson (Digital HD Tiles) (Barstow DK/LT/HL for Toilets & Verona LT/HL for Kitchens) or equivalent from Kajaria/Somany as approved by AO.

M&L for Premium (1st) quality straight edge, ceramic tiles 300x300x7 to 8mm thick in floors etc in any shade and design/pattern of light and dark tiles etc as approved matching with wall tiles, set and jointed in neat cement slurry & pointed in matching coloured polymer cement based grout to match over & including 20mm thick screed bed in CM 1:4 complete all as specified.

M&L for anti-skid premium (1st) quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4), over 25 mm thick cement concrete 1:2:4 type B-0 complete all as specified and directed by Engr-in-Charge.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

S&F Pillar taps long neck with 450mm long braided hose, fancy type 15 mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed in repairs complete in all respect all as specified and directed.

S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified. Make : Hindware (WHB-Garnet (Cat No.- 10080), Waste Coupling-Cat No.- F850023 (Economy Model), Bottle Trap-Cat No.- F850072 (Economy Model) or equivalent from Parryware/Cera as approved by AO

S&F vitreous china premium/1st quality wash down water closet wall hung EWC P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with matching colour flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified. Make : Cera (EWC-Compact, Seat Cover-Carona) or equivalent from Parryware/Hindware as approve

S&F vitreous china premium/1st quality wall hung wash basin white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F vitreous china premium/1st quality wash down water closet pan (pedestal pattern/EWC) S/P trap white colour of size 520x360x390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and making space/cavity in existing brick work wall for fixing and taking down existing of any description/size complete in all respect all as specified and directed. Make : Hindware (Concealed Cistern-Cento, Flush Plate-Cento) / Cera (Concealed Cistern-Chevron Cat No. - B1110101, Flush Plate-Cat No. B1120101-H Type)

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with smooth finish edges/sides complete fixed in position all as specified and directed.

S&F Pre-painted factory made galvalume aluminum zinc coating GI based plain sheet 0.45mm thick TCT of colour as approved as in gutters with 195mm high vertical sides and 220mm wide bottom having tensile strength of 550 Mpa for roof covering, including supply and fixing with all accessories all as recommended by manufacturers like fasteners/screws/brackets etc complete all as specified. Make : Tata Durashine or equivalent as approved

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified. Make : Cera (Cat No. - F7020305, F7040103) or equivalent from Jaquar/Paryag/Hindware

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified. Make : Jaquar/Cera/Hindware/Marc/Prima

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F chromium plated soap dish fixed to wall with drilling screws complete. Make - Jaguar, Code- CAN-CHR-1131N.

PVC(HDPE) SWR, 50 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, incl reducer, socket, bends, TEE etc. and laid in walls/floor for connecting bottle traps complete all as specified.

S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect as specified.

S&F CP peg set of 6 hooks and including all accessories like screws etc as recommended by manufacturer and complete fixing in position complete all as specified. Make : Prayag (BEA-30) or equivalent as approved.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make : Hindware (Cat No. - F160013) or equivalent from Parryware/Cera as approved by AO

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

Providing and laying 4mm (-0.2/+0.3) thick APP with mineral finish (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 5.6 Kg/sq.m water proofing membrane mineral finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps over the coat, 4mm th 5 layered APP membrane mineral finish shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Tensile strength in longitueinal and transverse direction as 600±150/400±150 N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 200 N/. Softening point of membrane not less than 145 degree (iii) Penetration @25 C d 15-25mm (iv) Water Tightness 10 kPa (v) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

(a) S&F false ceiling of 12.5mm th gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by AO and including supply and fixing of items all as specified as below :- Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed. Make : Gyproc (b) S&F Suspended Plain Ceiling includes Perimeter Channel {Material-GI(IS513),YS-260Mpa, Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. Make : Gypserra™ (c) S&F Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. Make : Gypserra™

.(d) S&F Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} Make : Gypserra™ (e) S&F Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Make : Gypserra™ (f) S&F Single layer of 12.5mm tapered edge Plain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Make : Gypboard® (g) Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed. Make : Gyproc®

M&L for Built in cup boards with pressed steel frame of size 75x45x1.25mm thick and shutter of 1.00 mm thick MS sheet including spray painting 2 coats over a coat of red-oxide primer on steel shurfaces all around all shown on drawing No TD-178 sheet 2/3 to 3/3 dated 12 May 2001 (overall external size of cup board shutter incl frame shall be taken into consideration for the pupose of measurement) including One No hanging rod of CP steel 15/20mm bore with brackets & two Nos peg set of three pegs each fixed inside the shutter complete fixed in repairs i.e, incl taking down and removal of old unserviceable wooden or steel built-in-cupboards incl frame from site all as specified and directed by Engineer-incharge.

MS work as in wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 and S&F 'J' or 'L' type hooks or cranked hook or bolt hooks or screw bolts, end to be fitted with washers and one hexagonal or square nut, length and dia of nut and bolt to be approved by GE complete all as specified and directed.

S&F LED lamp LED lamp 7W all as per complete. Make : Havells / CG/Bajaj /Wipro.

Supply and fix in replacement of MCB SP 6 to 32 Amps complete all as specified and directed.

upply and fix in replacement of MCB SPN 6 to 32 Amps complete all as specified and directed.

Earthing complete and supply and fix earthing with galvanised steel plate earth electrode 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolt, nut check nuts and washer of galvanised iron or steel with protection of GI, medium grade 15mm bore upto adequate length watering pipe 20mm bore GI common solt 15cm thick all as per electrical plate No 5SSR Part-I and connected to earting test point all as specified or indicated and testing on completion including PCC 1:3:6 type C-2 using 40mm graded stone aggregate CI cover and frame including all excavation and earth work etc all as specified and directed.

S&F MCCB 63 Amps 4 pole capacity 18 KA fixing in DB's complete all as specified.

Exhaust fans 250mm sweep, plastic body complete with and includding lourves suitable for operation on 230V AC , 50HZ complete all as specified.

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt all as specified and directed.

S&F in replacementn of existing unserviceable LED building light IP 66 powder coated pressure die cast aluminium compact high power LED fitting 20 watts with heat resistant toughned glasss medium grade of 1..20 mtr long and make to shape fxing with 40X6mm size of flat iron clamp, nuts,bolts and washer connection including two coat of aluminium paint over a coat of primer and fixing the fitting on bracket and all the electrical connection alll as specified directed.

Suppy & fix in replacment of existing unserviceable bateen with BOX TYPe Pre-coated CRCA body, heavy duty regal Batten of LED tube universal batten for G13 t8 lamps including necessary fitting on wall and making electirc connectin from ceiling rose to connector with suitble size of electric cable and making good the disturbed surface.

S & F Energy saving LED light fitting, 1 X 20 watt, 4 ft long 230 volts, decroative ultra slim linear LED lighting fixture with extruded polycarbonbate, environmental friendly, energy efficient ready to use pack, with electronic driver and with best quality diffuser high lumen output,2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable make Heavell cat Pat No LUMILINEPLUSBS20W

S & F Energy saving LED light fitting, 1 X 10 watt, 2 ft long 230 volts, decroative ultra slim linear LED lighting fixture with extruded polycarbonbate, environmental friendly, energy efficient ready to use pack, with electronic driver and with best quality diffuser high lumen output,2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable make Heavell cat Pat No LUMILINEPLUSBS20W

Supply & fix in LED mirror lgiht with linear & cpompact 9W mirror light with decorative grey aend caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt Model : EDGE LITE Cat part No: LHEXARP6PN1W009 Make Havells

Supply and fix sheet metal enclousure expoxy powder coated MCCB distribution box double door VTPN 4 way vertical type for MCB's alongwith provn of MCCB as incomer with common bus bar at incoming end of outgoing MCB grouted in wall using required cement concrete of cement mortar making good the disturbed surface matching with existing & providing electrical connection complete alll as specified. Note MCCB and MCBs will be measured and paid under separate items.

S&F existing unserviceable SP & N enclosure with 2 pole and earth metal plug & socket for incorporating 10A/20A SPN/DP MSB with plastic cover earth complete with one single pole MCB of 20 Amp complete all as specified and directed.

S&F MCCB 4 pole 100A 25 KA complete all as specified and directed.

Supply & fix in replacement of existing unserviceable FTL with new techonlgy ultra bright led tubelight with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in existing 15 tubelight with G5 lamp holders to give glare free light with separate led driver of capacity 18W 865 1148mm LED including necessary electric conection with batten.

S&F energy savign recess mounting 2 x 2 luminaires light fitting 24 W, complete with driver suitable for ceiling surface complete all as specified and directed. Make Bajaj cat No BZRSQL24WXENW or any other equivalent make of Bajaj//Crompton greaves

Supply & fix in replacement of existing unserviceable FTL with new techonlgy ultra bright led tubelight with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in existing 15 tubelight with G5 lamp holders to give glare free light with separate led driver of capacity 18W 865 1148mm LED including necessary electric conection with batten.

S&F energy savign recess mounting 2 x 2 luminaires light fitting 24 W, complete with driver suitable for ceiling surface complete all as specified and directed. Make Bajaj cat No BZRSQL24WXENW or any other equivalent make of Bajaj//Crompton greaves

M & L for RJ-11 telephone socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 miodule all as directed.

M & L for TV socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module all as directed.

Swami Engineers

Vipin Kumar and Brother

M/S Mukesh Kumar Gupta