WBPWD/EEBED/NIQ-19/2021-22

Amount

SITC of Single Skin Centrifugal Cabinet Type Fan complete with DIDW- forward curved belt driven centrifugal blower Rotaion of fan:- 1535 RPM, Epoxy/ galvanized steel sheet cabinet with service access doors, Inlet & outlet drilled flanges 1.1 KW, 4 pole, IE - 2, IP -65 Standard 1Ph/220V/50 Hz Motor (Make: ABB/Crompton/Havells/Ostberge) with Fixed base, common base frame with spring isolators, Flange at inlet and outlet are provided to facilitate duct connection necessary hanging/supporting members, water proof Dimer Panel for Fan's Speed control etc. [Capacity:- Static pressure- 65 mmwg, Air-Volume:- 2500 CFM, Speed of Motor:- 1450 RPM, Sound level-56 dba.].(Make:-Air Flow Private Ltd.//Kruger/ Ostberge) (for CCU 3Nos./HDU 4Nos.)

SITC of Double Skin Cabinet Type TFA with Heat Exchanger Cooling Coil complete with DIDW- backward curved belt driven centrifugal blower Rotaion of fan 1435 RPM, Epoxy/ galvanized steel sheet cabinet with service access doors, Inlet & outlet drilled flanges 3.7KW, 4 pole,IE - 2,IP-55 Standard 3Ph/415V/50 hz VFD Motor(Make: ABB/Cromptom) with Fixed base, common base frame with spring isolators,Flange at inlet and outlet are provided to facilitate duct connection necessary hanging/supporting members, water prof VFD Panel for Fan's Speed control etc. Sound level-65 dba. Capacity 70mm/wc Static pressure, 3200 CFM,incl. Condensor (Make- Zeco/Edgetech/Hitachi/O-General /Voltas/Daikin).(For CCU)

SITC of Double Skin Cabinet Type TFA with Heat Exchanger Cooling Coil complete with DIDW- backward curved belt driven centrifugal blower Rotaion of fan 1435 RPM, Epoxy/ galvanized steel sheet cabinet with service access doors, Inlet & outlet drilled flanges 3.7KW, 4 pole,IE - 2,IP-55 Standard 3Ph/415V/50 hz VFD Motor(Make: ABB/Cromptom) with Fixed base, common base frame with spring isolators,Flange at inlet and outlet are provided to facilitate duct connection necessary hanging/supporting members, water prof VFD Panel for Fan's Speed control etc. Sound level-65 dba. Capacity 70mm/wc Static pressure, 4200 CFM,incl. Condensor (Make- Zeco/Edgetech/Hitachi/O-General /Voltas/Daikin).(For HDU)

SITC of 10 Micron Pre Filter with Frame,it will be fitted on Centrifugal Exhust fan & on the Fresh air Damper (Make:Spectrum/Air Kolkata/Air Premier/Air Filter Industries)

SITC of 0.3 Micron Hefa Filter,it will be fitted on Centrifugal Exhust fan.(Make:Spectrum/Air Kolkata/Air Premier)/Air Filter industries

Supply, fabrication and installation of sheet metal duct in accordance with the approve ducting, laying, drawing, including accessories like anchor fastners, MS angle / rod for support, dampers, turning vanes etc. (Make- TATA/SAIL/JINDAL) 24 gauge galvanized sheet

22 gauge galvanized sheet

Supply & Pasting Al. Foil face 9mm thick Nitrile rubber insulation on duct by adhesive gum.

Supply & Fixing of Powder Coated Al. Grill. ((Make:Primier/Air Kolkata/Air Primier)

Supply & Fixing of Bird Screen as per direction of E.I.C (Make:Primier/Air Kolkata/Air Primier/AFI).

Supply and fixing of UV-C EMITTER for the above fan's for prevention of fungus , The minimum UV intensity in the coils shall be 700-800 UW-SEC/CM2. The unit shall be UL.Listed (UL-1995) and it should be suitable to fix the same in Fan's Duct as per direction of EIC.

Supplying, fabrication & fixing 2 Nos. M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) of 1m length for making Base frame for installation of TFA,Exhuast Fan and Outdoor unit of split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with 2 Nos. horizontal angle of 50 mm x 50 mm x 6 mm of 1.2m length as per direction of E.I.C.

Supply of 3.0 ton capacity split Air-conditioner machine fitted with Rotary compressor suitable for Refrigerant-R410A/R-32, BEE 2 star(min), Copper condenser and evaporator(Make- O-Genera /Hitachi/Daikin/As per approved by EIC) (9 nos. for CCU & 15 nos. for HDU)

Supply 1.5 ton capacity split Air-conditioner machine fitted with Rotary compressors suitable for Refrigerant-R410A/R-32 of BEE 3 Star rated. Full Copper Condenser and Evaporator (Make- O-General/Hitachi/Daikin/As per approved by EIC).

Installation, testing & commissioning of the above-said 2.0/3.0 ton split AC incl. Supply & fixing required Angle Iron Structure on wall & mending works as per direction of E.I.C.

Supply & laying Drain Water piping work out of PVC / HDPE hard pipes of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors. 25 mm dia

Supply, installation & commissioning Copper Refrigeration pipe line for liquid and suction line with supports & brackets for hiwall split AC. a) Liquid Line (3/8" OD HD Copper Pipe with 0.6mm thick)

b) Suction line (5/8" OD HD Copper Pipe with 0.7mm thick)

Supply & Fixing Pipe Insulation in suction & liquid line with 9mm nitrile rubber tube for hiwall split AC Liquid Line

Suction Line

Supply & Laying Extra Add-on items- 5/8"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation, 3 core x 2.5 sq.mm. copper cable incl. fixing arrangement and wrapping insulation of aerotape complete in all respect for A.C. Machine. and Supply & laying PVC Drain Pipe 25mm dia by shaddling on wall incl. PVC "T", elbow, bend etc as per direction of E.I.C.

Control copper Cabling from ODU Unit to IDU unit of Split AC 3 Core 2.5sq. mm. Communication Cable

Rates to be quoted will be inclusive of all the taxes incl. GST. No other additional charges will be applicable in addition to the quoted rates.

SKY DECORATIONS PRIVATE LIMITED

NAYEE DISHA PROJECTS

Lyric International