Construction of Barracks building (50 Nos. Bed) with development works for Armed Reserve Campus at Chinnaveppampattu in Tirupathur District.

Amount

E0001: Earth work excavation for foundation in all soils (including refilling) a) 0 to 2m depth.

E0003: Earth work excavation in Soft disintegrated rock (including refilling) a) 0 to 2m depth.

E0005: Earth work excavation for Open Foundation (Excluding Refilling). a) 0 to 2m depth.

E0007: Earth work excavation for Open foundation in soft disintergrated rock, laterite Kankar or soft rock not requiring blasting (Excluding Refilling) a) 0 to 2m depth.

b) 2 to 3m depth.

RE0006: Providing Pre-Constructional Antitermite treatment

F0040: Supplying and filling in foundation and basement with filling crushed stone sand

F0006: Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials

F0007: Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials

F0026: Filling in foundation and basement and other similar works with Excavated earth

F0013: Supply and filling in foundation and basement with gravel

FL0115: Supplying and laying of Rubber molded hydraulic pressed Paver blocks. (The brand, quality & color should be got approved from the Executive Engineer before use) b) 83mm thick Paver block

CSMP0002: Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer

CSMP0003: Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) including Mortar Plasticizer

CSMP0004: Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer

CS0038) Supplying and fixing of precast cement concrete slab for cupboard using M25 grade I) 20mm thick a) In Stilt/ Ground Floor.

b) In First Floor

CS0038) Supplying and fixing of precast cement concrete slab for cupboard using M25 grade II) 40mm thick a) In Foundation and Basement

b) In Stilt/ Ground Floor.

C0066: providing and laying in position, standardised concrete mix m-25 grade in accordance. a) In Foundation and Basement.

b) In Stilt/ Ground Floor.

c) In First Floor.

d) In Second Floor.

C0055: Supplying and fixing Monolithic RCC door frames of size 100x75mm with one edge groove size t x 20 mm (t represents the shutter thickness) using standardised Concrete mix M20 without vibrating including cost of steel and fabrication of reinforcement grills a. 1000 x 2100 mm

CSMP0001: Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 used including cost of all materials, moulding, curing, transportation, laying, pointing etc., for approach road,pavement slab and other similar works etc., complete as per the relevant standard specifications and as directed by the departmental officers.

BMP0011: Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement .

BMP0012: Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm a. In Stilt / Ground Floor

b. In First Floor

c. In Second Floor

BMP0013: Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm a. In Foundation and basement

b. In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

BMP0014: Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm. a. In Stilt / Ground Floor

b. In First Floor

FLMP0001: Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002: Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0024: Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

FL0025: Weathering course with concrete broken brick jelly 20mm gauge

FLMP0004: Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005: Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006: Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0010: Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5x59.5cmx10mm for flooring and other similar works (Best approved quality, colour and shade and the same shall be got approved from the Executive Engineer before use) in cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0011:Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FW0004: Providing Form work and centering for reinforced cement concrete works a. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c.For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d.For vertical walls (sump)

f.Curved surface

PLMP0001: Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0002: Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003: Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0004: Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2% a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PA0001: White washing three coats using clean shell lime slaked

PA0022: Painting the new wood work with two coats of approved first class synthetic enamel

PA0026: Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0037: Painting two coats with ready mixed PLASTIC EMULSION PAINT of first class quality paint of approved colour and shade including a priming coat on cement

PA0042: Painting two coats with ready mixed EXTERIOR EMULSION PAINT

PA0027: Providing wooden ( Melamen Door ) Polish for new wood by removing by blade scrapping the exisiting dirt

J0001: Supplying and fixing of Teak Wood wrought and put up for frames of doors a) Teak wood over 2.00 metre and below 3 metre length

b) Teak wood below 2.00 metre length

J0021: Supply and fixing of best approved superior variety Magnetic door catches

J0029: Supplying of Mild steel hold fasts horizontally twisted of size 230x40x4mm

JV0022: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators

JW0042: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type

JW0044: Supplying & Fixing in position of UPVC Sliding windows

JD0095: SSupply and Fixing of 25mm (+/- 1mm) thick WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain matt finish. The door must be completely made by machine, without any post-production fabrication. The Solid WPC board shall have minimum Bulk Density 650 KG/ Cub.Mt. The door is suggested to be hinged to the WPC frame of size 75 x 50mm with minimum of 5 inch butt hinges of SS including cost of WPC door frame, shutter, SS cylindrical lock and door closer and labour charges

JW0007: Supplying and fixing of best Indian Teak wood openable French window of following size having single bay openable with frame made up of TW scantling 75 mm x 37.50 mm (verticals- 2 nos. and horizontals – 2 nos. top & bottom) shutters with styles, glass panels using frosted glass 4 /5.5 mm thick fixed with T.W. beading of size 15 mm x 12 mm including cost of all materials, labour charges for wrought and putup and fixing in position and brass furniture fitting such as 3 nos of 5" butt hinges, 2 Nos of 6"/12 Tower bolt, 1 No handle, 1 No nylon bush and with required Brass screws c) 1.00x1.95m

JD0097: Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters in position using 2 Nos. of 75mmx37.5mm styles and 3 Nos. of 150x37.5mm rails (Top, Bottom and Lock rail) and 18.75mm thick planks for panels including cost and labour for fixing the brass furniture fittings. a) Double leaf suitable for door size 1800mm x 2100mm

JD0059: Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size c) 1000 x 2100 mm

GR0001: Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure

RE0005: Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

JD0094: Providing T.W. double leaf shutters for Cupboard/ward robes with 9mm thick phenol Bonded BWR grade ply wood

WS0002: Supplying and fixing of 110mm dia PVC SWR pipe Rain water downfall pipe

MS0050) C.I Steps 5kg

WS0033: Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036: Supplying and fixing of half turn C.P short body Tap of 15mm dia

MS0053: Supplying and fixing of C.I Manhole cover 60 x 60 cm (50 kgweight)

WS0006: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0007: Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line

WS0276: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM a) 20mm ASTM D schedule 40 threaded PVC pipe with necessary UPVC specials

WS0107: Supplying and fixing of 32mm dia PVC Tee with end cap of best approved quality with IS

WS0239: supply and erection of 150mm dia of pvc casing pipes (6kg/cm2) without as per is 12818/2010 of approved quality for bore wells

WS0235: Supply and delivery of nylon rope of best appred quality.

EL0349: Supply and delivery of 3 core 4 sq.mm flat type copper cable conforming to IS 694/1990, PVC insulated and sheathed cable for submersible motor.

WS0023: Supplying, delivery and laying of following dia UPVC pipe schedule 80 of approved ISI quality including earth work excavation, cutting, threading, and jointing, conveying, lowering the UPVC pipes, UPVC special in the trench, refilling the earth after laying, barricading, pumping, de-watering watch and ward. a) 32 mm UPVC pipes

c) 50 mm UPVC pipes

SA0002: Supplying and fixing of Porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm

SA0036: Supplying and fixing the following dia PVC(SWR) pipe with ISI mark confirming to IS 13952:1992- type `A` with PVC cowl and relevant specials confirming to IS

SAMP0006: Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 110 mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cm 1:5 (One of cement and five of crushed stone sand) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag

SAMP0003: Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

SAMP0004: Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

SAMP0005: Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag). (Other than ground floor)

SA0025: Supplying and fixing EWC superior variety (White) 500mm with PVC SWR grade ‘P’ or ‘S’ trap

SA0031: Supplying and fixing the following dia PVC (SWR) pipe and relevant specials including packing the joints with rubber lubricant a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035: Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048: Supplying, laying and jointing the following dia UPVC Non Pressure pipe a) 110 mm dia UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

SA0155: Supplying and fixing of CP Two Way Bib Cock with Health Faucet

MS0002: Supplying and fixing of 20mm dia aluminium hanger rods

MS0003: Supplying and fixing of Aluminium Towel Rail of 75cm

MS0006: Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007: Providing and fixing iron Chromium plated 8 gauge Picture hooks

MS0008: supplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of size 500x400x5.5mm

L0001: Supplying and planting of Avenue Trees

L0004: Supplying and fixing of Triangular shape chicken mesh Tree Guard using 8cm dia

EL0002: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026: Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034: Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041: Supplying and fixing 15 Amps 3 pin plug type socket with switch

EL0214: EARTHING AND EARTH CONNECTIONS: Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm dia GI pipe

EL0074: Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075: Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078: Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"" Electric fan 1200mm sweep

EL0084: Supplying and fixing of 300 mm dia sweep AC exhaust fan

EL0070: Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb

EL0047: Supply and fixing of 18 watts LED tube light with fitting of four feet long

EL0045: Supplying and fixing of water tight bulk head fitting with guard suitable for 12W LED lamp

EL0100: Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED (light emitting diode) a) 25W LED Street Light Fitting with LED

e) 150W LED Street Light Fitting with LED

EL0165: Supply and fixing of 63 amps triple pole main switch with fuse

EL0184: Run of main with 1 wire of 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark

EL0190: Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0202: Supply and Run off main with 4 wires of 4 sq.mm PVC insulated single core multi strand fire

EL0174: Supplying and laying of 8 SWG GI wire for earth connection on wall

EL0227: Supplying and fixing 3 nos of 63 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps including cost of all materials

NL0001: Supplying Fabrication and Erection in position of M.S.

NL0006: Supplying and fixing of following size aluminium die casting lettering and numbering with approved coloured powder coated in matt finishing a) 9" dia aluminium dye casting letters

c) 12" dia aluminium dye casting letters

EL0324: Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63 A 4 P MCB as incoming and 24 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only.

EL0201: Run off following PVC insulated single core multi strand fire retard flexible copper cable with ISI mark conforming to IS: 694/1990. With one run of 7/20GI stay wire suspended with porecelin reel insulators at 1.0m center to center for support of phase and neutral center from fop of street pole to the house/flats including all materials etc., all complete for EB service connections including labour charges for fixing GI wire and MS Angles (for EB service connection ). c. 4 wires of 10 Sq.mm

WS0278: Supply and delivery of clear water vertical wet type submersible pump suitable for 100mm/150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes o. 50 lpm x 175 m

WS0018: Supply and fixing of following GI pipes `B` class of best approved quality,with ISI mark including cost and conveyence and fixing in position WS0018.IX.d: 50mm dia Gun Metal Gate valve

WS0018.X.a : a.50mm GM non return valve

WS0018.VI.a: a. 50mm dia GI Union

WS0018.XIII.c: c. 150mm dia MS clamp sets

WS0017: Supply and fixing of following GI pipes `B` class of best approved quality,with ISI mark including cost and conveyence and fixing in position a) 65mm dia GI pipe.

WS0236: Drilling of (150mm) vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting the casing pipe after inserting the casing pipe in the drilling hole a) Upto 150m depth ending below Ground level

b) From 151m upto 180m depth ending below Ground level

c) From 181m upto 210m depth ending from Ground level

WS0240: supplying and fixing of 160mm dia pvc end cap for borewell casing pipe of approved brand etc., all complete and as directed by the departmental officers (the quality and brand of pvc end cap should be got approved by the executive engineer before use)

WS0279: Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002. q. 100 lpm x 50 m

WS0162: Labour charges for the erection of three phase Upto 5 HP submersible pumpset in borewell / openwell

WS0266: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply For 5 HP Motor

WS0243: Supplying of following dia UPVC Column pipe for borewell a) 32mm dia UPVC Column Pipe

SRI SABARI ASSOCIATES (BID ID -1519125)