Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC P O CHAMURCHI BAZAR CHAMURCHI DIST JALPAIGURI | CHAMURCHI | JALPAIGURI | WEST BENGAL | L1 | Accepted-AOC ok | |
| 2 | L2₹9.4 L+₹49,886 (5.62%)Rejected-Finance B 150 GROUND FLOOR BACK SIDE PANDAV NAGAR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹10.2 L+₹1.3 L (14.9%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
16 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF BIHTA
AIR FORCE STATION BIHTA - 801103
REPAIR/MAINT OF WOODEN AND STEEL JOINERIES INCLUDING ALUMINIUM WORKS, FALSE CELLING AND PLASTERING AT CERTAIN BLDGS AT AF STN DARBHANGA UNDER GE (AF) BIHTA
2023_MES_613486_2
8333/BHT/DBG/E8
Open Tender
Civil Works
Item Rate
180 days
Darbhanga
CLASS E CATEGORY a(i)
6 documents required · 6 mandatory
₹500
GE (AF) Bihta
₹20,000
Yes
12 Dec 2023
26 Sept 2023
24 Oct 2023
26 Sept 2023
16 Oct 2023
4 Oct 2023
27 Sept 2023 - 30 Sept 2023
Amount
Taking down chowkhats incl shutters (without taking off shutters from the frame) exc 1.5 sqm and not exc 4 sqm each, complete all as specified and as directed.
Taking down chowkhats incl shutterrs (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1sqm but not exc 2 sqm each, complete all as specified and as directed.
Taking down shutters of any description not exc 1 sqm each, complete all as specified and as directed.
Taking down shutters and refixing in other opening of any description exc 2sqm each, complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and as directed.
S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to Fe-290 Grade-E-165, complete all as specified and directed.
All as per per item 7 above but except steel, complete all as specified and directed. (Dismantled steel shall be reused under this item.)
S&F rolled mild steel work conforming to Fe-290 Gde E-165 as in angle iron droor frame etc of any size, including flat iron thresh hold, flat iron hold fast in back of chowkhats, bracings etc as required at site, including cutting to shape/size required and provided with necessary nuts, bolts, washers, welding etc, complete all as specified and directed.
All as per per item 9 above but except steel, complete all as specified and directed. (Dismantled steel shall be reused under this item.)
M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
M&L for 30 mm thick 2nd class hard wood (Sal) glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc divided into squares with plain, chamfered or rounded, mitered and rebated sash bars any number, size of members of shutters as specified in clause 8.24(a) of SSR part I and fitted to chowkhats complete all as specified and directed.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 No.) suitable handle (1 No), complete all as specified and directed.
Supply only figured glass, pin head type, 4 mm thick, ordinary quality, cut to size as required at site, complete all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates of aluminium door/window shutters)
S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
Supply only sheet glass, 5.5 mm thick, ordinary quality, cut to size as required at site, complete all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates of aluminium door/window shutters)
S&F 25 mm thick flush shutter, for cupboard doors, solid core construction, with block board core and plywood face panel, commercial type on one side and one face covered with decorative face veneer with lipping, complete all as specified and as directed.
S&F mild steel medium weight cold rolled butt hinges 100 mm long, complete all as specified and as directed.
S&F aluminium anodised barrel tower bolt of extruded section, 150mm long, complete all as specified and as directed.
S&F 125 mm long aluminium handle, cast type, anodised, complete all as specified and as directed.
S&F 250 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.
Hacking out old broken Glass (any thickness, size, quality of description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.
S/F 3mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty, complete all as specified and as directed.
S/F 3 mm thick figured glass in squares n.exc 0.5 sqm in each pane glazing with oil putty, complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapels, complete all as specified and as directed.
S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapels complete all as specified and as directed.
M&L two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth incl preparation of surface, complete all as specified and as directed.
M&L two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surfaces of any description exc 10 cm width or girth, complete all as specified and as directed.
S&F in repair curtain rails with fixing brackets, stops, rollers etc. of anodised aluminium alloy including vertical blinds curtains polyester for windows with chain and cord control, complete all as specified and as directed.
S&F adjustable stainless steel curtain rod of 25 mm diameter, capable of handling heavier fabrics which can hold upto 10 kg weight, with decrorative finials and mounting brackets incl required SS screws on either end, complete all as specified and as directed.
Dismantling boarding, any description, fixed in any position, complete all as specified and as directed.
S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet crimped eaves and steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheet in roof covering, complete all as specified and as directed.
S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.
Dismantling wall & ceiling boards of any nature, any thickness incl cover fillets complete all as specified and as directed.
S&F powder coated anodised aluminium snap grid frame work for false ceiling, size of grid 605x605 mm, including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.
S&F Gypsum ceiling board 60x60cm x12mm thick (pre-finished decorative type) in ceiling fixed with screw as per manufacturers instruction, or as specified and directed by Engr-in-Charge.
Dismantling timber scantling 40sqcm and over in section in any position in framed work, complete all as specified and as directed.
S&F 2nd class hard wood (Sal) as in scantling clean sawn, timber framed and fixed in position, complete all as specified and directed.
S&F 2nd class hard wood (Sal) as in plain fillets square, rectangular or triangular in sec clean sawn, fixed with nails area exc 13.00 Sqcm but n.exc 25.00 Sqcm. complete all as specified and directed.
M&L for preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil, complete all as specified and directed.
Taking down cement or cement lime plaster on walls, any description including racking out joints, hacking for key, scrubbing down with water etc. and removing rubbish, complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6, surface finished fair and even, complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of ceiling surfaces in cement mortar 1:4 including finishing the surface fair and even complete all as specified and directed.
M&L for preparation of New plastered surface and applying two coats of distemper oil emulsion over a coat of chalk whiting on walls, complete all as specified and as directed.
M & L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.
M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and as directed.
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and as directed.
S/F in repair mortice locks of 100mm size vertical of 4 levers, aluminium body fixed to aluminium shutters, complete all as specified and directed by Engr-in-charge.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F door closer hydraulically regulated, aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed, complete all as specified and directed.
S&F in repair 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and as directed.
S&F in repair Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, length of bolt 375mm, complete all as specified and as directed.
S&F in repair Brass, skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt, length of bolt 450mm, complete all as specified and as directed.
S&F in repair 150m size extruded brass handles, fabricated type polished, complete all as specified and as directed.
S&F in repair floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in floor, overall length of cover plate 150 mm, complete all as specified and directed.
S&F in repair door seal to bottom of door shutters of any type and width between 0.75 to 1.25 m, premium painted brown aluminium body 18mm high with long lasting 22mm high nylon rubber bottom fix to door to seal drafty gap, rubber shield 36.5"/94cm and height 40mm, anti rust black rubber with coated black screws to be fixed on almost any door type, complete all as specified and as directed.
PAPPU ROY CONSTRUCTION
G S CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .