CARRYING OUT REPAIR ROUTINE MAINTANENCE OF LIFTS AT ADITI AND AHILYA AT OUTLAYING AREA ALONGWITH MANNING AND OPERATION UNDER GE (NW) NOFRA COLABA MUMBAI

Amount

Repair/maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of crack/broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of u/s damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work ,cabin, minor repair of cabin light and minor repair of cabin fan , ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engineer-in-Charge. for the following lifts:- Note : - (i) Two mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (ii) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department.(iii) The detailed duty mechanics of the firm shall report to the JE Concerned at the Lift complaint cell for receiving the complaints at round the clock daily including sunday and holiday.(iv) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell. Location :- Aditi 01 Nos lift ECE Make G+12 upper floor.

All as per item No 1.00 herein before but 13 passenger G + 12 upper floors in building Ahilya 01 Nos lifts of ECE Make.

Desconnecting and taking out unserviceable travelling cable from hoist way and supply and fixing new travelling cable PVC insulated 16 core flat / round type with multistranded copper conductor 1100 Volts grade of size 0.75 Sqmm confirming to IS and including thimbless suspended type freely move with car cabin up and down movements between ground and upper floors including necessary proper connection with midway junction and other connection required in circut complete all as specified and directed by Engineer-in-Charge Locations : ADITI and Ahilya

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight pully and car cabin with clamps,nuts, bolts and washer etc complete all as specified and directed by Engineer-in-Charge Location : Aditi and Ahilya

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 8 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nut, bolts and washers etc complete all as directed by Engineer-in-Charge . Location Aditi and Ahilya.

S&F New main drive VVVF drive complete with all accessories and electric connection.complete all as directed by Engineer-in-Charge Location: Aditi and Ahilya

Disconnecting and taking out old defective infra red door sensor of any type and make and supply and fix new infra red door sensor up to full length of car door complete all as specified and directed by Engineer-in-Charge. Location : Aditi and Ahilya

S&F New Rope Load Sensor at Certain lifts at Nofra complete all as directed by Engineer-in-Charge Location Aditi, Ahilya

Taking down unserviceable cabin fan from car cabin and supply and fixing new new car cabin fan non oscilatting type axial flow single speed 300mm sweep, 240 volts ISI mark with grill complete all as specified & directed by Engr-in-Charge. Locations : ADITI and Ahilya

Supply and fix in repair of recessed mounting square/round LED downlight 8/6/3 watts with high quality economic energy suitable for ceiling complete all as specified and directed by Engineer-in-Charge. Locations : ADITI and Ahilya

Supply and fix Aluminum covered wire wound dynamic breaking resistor to absorb the reserve energy dissipation of motor during regeneration in control operation suitable for existing capacity motor up to 15 HP VFD complete all as specified and directed by Engineer-in-Charge. Locations : ADITI and Ahilya

S&F in replacement car door (VVVF) drive with all accessories to match the existing complete all as specified and directed by Engr in Charge. Locations : ADITI and Ahilya

Dismantling and taking out ARD control system and commissioning and testing of new ARD system including PC cards/diodes suitable for 6 PS lift to 13 PS lift including wiring with connection items in existing building 415V 50 Hz 3 Phase comprising with maintainace free battery 12V 17 AH to match with exisiting capacity motor and control system comlete all as specified and directed by Engr in Charge

Taking down old speed governor complete with pit pulley and machine room pulley and S&F new pulley complete all as specified and directed.Location: Aditi and Ahilya

Disconnecting and taking out unserviceable emergency alaram system(Hooter) complete S&F new emergency alaram system assembly on ground floor landing complete with PCB card battery charging unit and speaker including necessary control electric connection wiring with COP and control panel complete all as specified and directed in Central machine shope and various other lift of Nofra area complete all as specified and directed by Engr in Charge Locations : ADITI and Ahilya

Manning & operation of electrically operated fully automatic capacity 13 passenger/06 passenger/ 08 passenger /Goods lift of any capacity to serve any Nos of floors 16 hrs daily in one shifts from 0600 hrs to 1400 hrs and 1400 hrs to 2200 hrs including taking care of from any pilfrerage/ theft or damage etc, complete all as directed by Engineer-in-Charge in Bldgs :Aditi and Ahilya - bldgs (Total- 02 Nos bldgs) Note :- (i) One lift operator to be employed in each bldg per shift. (ii) Passes will be processed alongwith (after verification of antecedence of deployed employees and verified experience certificate only. Pass shall not be granted without submission of proof of well qualified lift operators & experience certificate. In case of OEM, the qualification mentioned in note is not applicable which shall be verified by Engineer-in-Charge before issue of pass) (iii) Contractor shall submit ID proof, Residential proof, Bank A/C details to department and obtain approval of Engineer-in-Charge before employing a person as Operator (iv) Payment to employees shall be done by crossed cheque through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. The contractor shall submit proof to Engineer-in-Charge before claiming any payment. (v) Lift operator (semi skilled) shall be available with lift cell as per the shift timings specified in the tender and he will report to JE E/M in-Charge or Lift Cell in-Charge. In case of emergency he will function according to their direction. If he is found absent or move without intimating to in-Charge of Lift Cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs 1500/- per shift shall be affected.(v) Payment as per quoted rate shall also be deducted in addition to the penalty as specified above. (vi) In case of malfunctioning if any noticed, lift operator shall intimate to the lift cell. The individual employed as lift operator should has minimum qualification of ITI course equivalent from state or central board

(vii) Contractor shall submit the labour licenece VAT as applicable as per latest laws/acts & Copy of GST Regn registered number issued by concerned authority. (viii) Insurance coverage, compensation if any applicable or necessitated due to mis operation of lift shall be the responsibility of contractor. The quantum of compensation shall be assessed based on the BOO composing of Lift Inspector of Maharashtra State, representatives of both agencies carrying out M&O works and routine maintenance work of lift and members from department. (ix) Contractor has to submit proof of payment of EPF subscription made by him as applicable as per latest laws/acts alongwith RAR failing which RAR will not be progressed for payment. (x) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable. (xi) The bidders are advised not to quote rate less than minimum fair wages as circulated by competent authority. If the quoted amount is less than the estimated cost of work mentioned in BOQ item No 16.00 i.e Rs 7,15,000.00, the lowest bidder will have to deposit FDR/BGB as elaborated herein after in favour of Accepting Officer within 07 days of opening of financial bid (Cover No 2). The deposited amount shall be the difference between estimated cost mentioned in BOQ item No 16.00 (i.e) Rs 7,15,000.00 and amount quoted by lowest bidder. FDR/BGB shall be released only after satisfactory completion of work. If the contractor fails to pay minimum wages to employees, the department shall have right to withhold the said amount which will be verified by GE. The decision of Accepting Officer regarding amount to be withhold shall be final and binding. The withhold amount will be utilised by GE for payment to employees if contractor fails to pay minimum wages and balance amount if any shall only be released. If the lowest bidder fails to deposit the amount as stated above within 07 days, the contractor shall be banned for 06 months & his bid shall be rejected. The contractor shall sumbit 03 Nos of BGBs/FDRs of equal amount as mentioned above. The BGBs/FDRs validity shall be 04 months, 08 month & 12 months respectively for the purpose of encashment/ release as the case may be. (xii) The rates quoted shall be inclusive of suitable reliver wherever sundays & holidays are mentioned for working

Shree Elevator Engineering Co.

Monarch Enterprises

Escon Elevators Pvt Ltd

Veer High Tech Solution