SPECIAL REPAIR TO BLDG NO T-53 INSIDE FIU UNDER GE (WEST) LUCKNOW

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GE (WEST ) Lucknow

Name of Work : Special repair to Bldg. No. T-53 inside FIU under GE (West) Lucknow.

Contract No: GE/W/LKO/T-70 OF 2026-27

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 M & L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 and including demolition brick work/stone boulder masonry, built in cement mortar incl all quions, arches,pillars etc complete all as specifiedcomplete all as specified and directed. 8 Cum Excess(+) Full Conversion INR

2 M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius and including demolition brick work, built in cement mortar complete all as specifiedcomplete all as specified and directed. 25 Sqm Excess(+) Full Conversion INR

3 M & L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar complete all as specified and directed. 60 Sqm Excess(+) Full Conversion INR

4 M & L for preparation of new plastered surfaces of wall and applying two coats of OBD over 1mm thick wall care putty complete all as specified and as directed. 60 Sqm Excess(+) Full Conversion INR

5 M & L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and plastering the wall surface with white cement based polymer modified self curing mortar, including taking down of cement or cement lime plaster, raking out joints and disposal of rubbish complete all as specified and directed. 1405 Sqm Excess(+) Full Conversion INR

6 M & L for preparation of new plastered surfaces of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including priming coat over and including applying minimum 1mm thick wall care water proofing putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. 605 Sqm Excess(+) Full Conversion INR

7 M&L preparation of new plastered surface of walls and applying one coat of wall care putty and over two or more coats of 100% Premium acrylic emulsion (weather coat) paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Note : Primer and emulsion to be carried out through air less spray machine only (Mechanical means). 800 Sqm Excess(+) Full Conversion INR

8 M & L for repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling and plastering the surface with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints and disposal of rubbish, all complete as per the direction of Engineer-in-Charge.. 65 Sqm Excess(+) Full Conversion INR

9 M&L for preparing newly plastered surfaces of ceiling and applying two coats of OBD over 1mm thick wall care putty complete all as specified and directed. 65 Sqm Excess(+) Full Conversion INR

10 M&L for preparing old surfaces of ceiling by brooming down or by steel wire brushing and applying one coat of OBD over 1mm thick wall care putty incl scafolding at any height complete all as specified and directed. 135 Sqm Excess(+) Full Conversion INR

11 M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. 45 Sqm Excess(+) Full Conversion INR

12 M & L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. 120 Sqm Excess(+) Full Conversion INR

13 M & L for joint free glazed coloured GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7 to 8mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. 50 Sqm Excess(+) Full Conversion INR

14 M & L for Granite 18- 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding (rounding edges), including demolition of existing stone slabs laid bedded and pointed in any mortar and including rounding to edges of stone slabs one edge, such as in cooking platform, and other similar situations etc complete all as specified and directed. 15 Sqm Excess(+) Full Conversion INR

15 M & L for Drilling through holes in granite stone for inserting pipes etc not exc. 25 mm dia complete all as specified and directed 4 Each Excess(+) Full Conversion INR

16 Dismantling brick tiles or terracing tiles, single layer of roofs including demolition and removing of mud in roofs any thickness including plastering and leeping (whether full thickness removed or part thereof ) and demolition material disposed out from MoD land and including roughening surfaces of old concrete by picking, sweeping/Brushing clean and washing down with water to remove dust and apply neat cement slurry with 3.0kg of cement per sq. metre complete all as directed. 175 Sqm Excess(+) Full Conversion INR

17 M & L PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in roof kerbs/roof padding /benching or mud stops, and platform for mounting service tanks, rounded,chamfered on edges including necessary use and waste of from work etc complete all as specified and directed 20 Cum Excess(+) Full Conversion INR

18 M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces & laying of glass fibermesh 45 gsm over tacky surface and allow it to dry. (b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total consumption having below properties:- 1. Elongation - 500%-600% 2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. 175 Sqm Excess(+) Full Conversion INR

19 Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

20 Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed. 15 Each Excess(+) Full Conversion INR

21 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. NOTE : The work for fixing of WPC doors/windows shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to WPC Door/windows shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to WPC doors/windows after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 75 RM Excess(+) Full Conversion INR

22 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. NOTE : The work for fixing of WPC doors/windows shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to WPC Door/windows shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to WPC doors/windows after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 60 RM Excess(+) Full Conversion INR

23 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter ccomplete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) NOTE : The work for fixing of WPC doors/windows shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to WPC Door/windows shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to WPC doors/windows after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 50 Sqm Excess(+) Full Conversion INR

24 S & F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid glazed and skelton door shutter open rebated,prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed. (Note: Mild steel butt hinges shall be paid separately) NOTE : The work for fixing of WPC doors/windows shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to WPC Door/windows shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to WPC doors/windows after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 30 Sqm Excess(+) Full Conversion INR

25 S&F 10-12mm thick Plain/frosted Toughned glass (logo of MES as specified and directed) as in hinged doors, partitions automatic doors, fixed glass type window and similar work with all necessary fittings like top and bottom brackets, two numbers of stainless steel handle as appropriate size for door, locking arrangement i including cutting to shape, drilling holes required etc alongwith all necessary fittings (but excluding double action floor spring) complete all as specified and directed. 10 Sqm Excess(+) Full Conversion INR

26 Supply and Fixing powder coated(thickness of powder coating shall not be less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified 40 Sqm Excess(+) Full Conversion INR

27 S & F 250 mm Stainless steel ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. 15 Each Excess(+) Full Conversion INR

28 S & F 150 mm long Stainless steel matte finish ,barrel tower bolts of extruded section and fixed complete all as specified and directed.. 10 Each Excess(+) Full Conversion INR

29 S & F 200mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. 18 Each Excess(+) Full Conversion INR

30 S & F 100mm size Stainless steel matte finish hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

31 S & F 75 mm size a, stainless steel matte finish Bow Handle fixed with screws for kitchen cabinet & below platform. 16 Each Excess(+) Full Conversion INR

32 S & F Stainless Steel handle matte finish fabricated type 150mm long as complete all as specified and directed. 20 Each Excess(+) Full Conversion INR

33 S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed 60 Rm Excess(+) Full Conversion INR

34 S & F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete all as specified and directed 72 Each Excess(+) Full Conversion INR

35 S & F two (double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed. 25 Each Excess(+) Full Conversion INR

36 Providing and fixing of A2Z Series (A2Z Infra Solutions/Rayners/BWS Windows/Lilli Windows make) Double rebate windows & ventilators made of High-performance factory-made system Aluminium windows with Akzonobel powder coating of 60-70 microns (Any RAL Colour). Section for Outer frame should be of 91mm x35mm, Glass shutter frame shall be of 54mm x 30mm, Mesh shutter frame shall be of 54mm x 30mm, 5mm thick Single Glazed beading shall be of 15mm x 18mm.5mm thick ClearGlass shall be used in all the windows & ventilators. Stainless Steel Wire Mesh shall be used in Wire mesh Shutters. 10mm Sq bar M.S. Grill/Guard bar with 150mm c/c shall be fixed in between glass & mesh shutter. All frame corners shall be joined/assembled using self-locating corner cleats (No screwing at corners shall be allowed). All Hardware shall be used from a reputed brand, weather silicon shall be used for filling the gap between window opening & window Frame complete all as specified and directed. 41 Sqm Excess(+) Full Conversion INR

37 S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed. NOTE : The work for fixing of WPC doors/windows shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to WPC Door/windows shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to WPC doors/windows after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 30 Sqm Excess(+) Full Conversion INR

38 S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips incl taking down existing false ceiling complete all as specified and directed. 140 Sqm Excess(+) Full Conversion INR

39 M&L pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement ridge complete all as specified and directed. 60 Sqm Excess(+) Full Conversion INR

40 S & F 300 mm long MS ordinary pattern door spring "plate type" including roller and roller plate complete all specified and directed. 4 Each Excess(+) Full Conversion INR

41 S&F in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 45 Sqm Excess(+) Full Conversion INR

42 Dismantling wrought iron or mild steel work of any description complete all as specified and directed. 0.35 Qtl Excess(+) Full Conversion INR

43 M&L structural Steel work in tubular trusses trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-410-W(Gde.E-250) quality-B including special shaped washer etc complete using one or more tubes or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified and directed. 350 Kg Excess(+) Full Conversion INR

44 S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. 2 Each Excess(+) Full Conversion INR

45 S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank including float ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as directed 2 Each Excess(+) Full Conversion INR

46 M & L for Framed work such as grills,gratings, etc.. with ends of bars,shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incl dismantling of steel complete all as specified and directed. 100 Kg Excess(+) Full Conversion INR

47 S & F for Welded steel wire fabric supplied and fixed complete to wood or steel member not exceeding 4 kgs/sqm as specified and directed. 50 Kg Excess(+) Full Conversion INR

48 M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified and direced. 10 Sqm Excess(+) Full Conversion INR

49 S&F in repair 25mm dia stainless steel curtain rod, superior quality (weight not less than 300 g/RM) with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed. 90 RM Excess(+) Full Conversion INR

50 M&L for providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. 1 Cum Excess(+) Full Conversion INR

51 S & F in repairs stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed. 2 Each Excess(+) Full Conversion INR

52 S & F in repair looking mirror of size 600 x 450mm of 6 to 8 mm thick fixed with stainless steel studs complete all as specified and directed. 5 Each Excess(+) Full Conversion INR

53 S & F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

54 S & F in repair vitreous china Wash hand basin white, flat back type of size 550x400mm including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste coupling with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. 3 Each Excess(+) Full Conversion INR

55 S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed. 2 Each Excess(+) Full Conversion INR

56 S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. 2 Each Excess(+) Full Conversion INR

57 S & F in repair 10 ltrs capacity PVC valveless syphonic double action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. 4 Each Excess(+) Full Conversion INR

58 S & F in repair for CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified. 12 Each Excess(+) Full Conversion INR

59 S & F in repairs swivel CP shower rose with long arm size 200 x 200 mm complete all as specified and directed. 2 Each Excess(+) Full Conversion INR

60 S & F in repairs brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and directed. 5 Each Excess(+) Full Conversion INR

61 S & F in repairs brass Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15 mm bore size complete all as specified and directed. 4 Each Excess(+) Full Conversion INR

62 S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified. 15 Each Excess(+) Full Conversion INR

63 S & F in repair Gun-metal, globe or gate valves 25mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 4 Each Excess(+) Full Conversion INR

64 S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed. 4 Each Excess(+) Full Conversion INR

65 S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed. 4 Each Excess(+) Full Conversion INR

66 S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed. 4 Each Excess(+) Full Conversion INR

67 M & L for 50mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long, including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed 25 Sqm Excess(+) Full Conversion INR

68 M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed 60 Sqm Excess(+) Full Conversion INR

69 M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. 60 sqm Excess(+) Full Conversion INR

70 M & L for Plain Cement concrete Type C1 1:3:6 (20 mm graded stone aggregate) as in surface channels and drains including demolition of existing cement concrete complete all as specified and directed 1.5 Cum Excess(+) Full Conversion INR

71 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed 25 RM Excess(+) Full Conversion INR

72 Demolition of cement concrete (reinforced) such as beams, roof, shelves, manhole cover, chajjas, parapets, water tanks and similar works complete all as specified. 0.75 Cum Excess(+) Full Conversion INR

73 M & L RCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintel beams, shelves, parapets and the like including necessary form work complete all as specified. 0.5 Cum Excess(+) Full Conversion INR

74 M & L for Providing precast cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as cover slabs (for man holes etc.) set in CM 1:4 and similar articles with plain faces including use and waste of formwork complete all as specified and directed 0.25 Cum Excess(+) Full Conversion INR

75 Taking down steel tubing of 15 mm dia (Nominal bore) and connections, including cleaning for refixing or removal to store complete all as specified and directed. 50 RM Excess(+) Full Conversion INR

76 Supplying and laying of CPVC pipes of external dia 20mm, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. 50 RM Excess(+) Full Conversion INR

77 Taking down steel tubing of 20 mm dia (Nominal bore) and connections, including cleaning for refixing or removal to store complete all as specified and directed. 30 RM Excess(+) Full Conversion INR

78 Supplying and laying of CPVC pipes of external dia 25mm, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. 30 RM Excess(+) Full Conversion INR

79 Supply and fixing brass tee, elbow, reducer, coupling and all other fittings of size 20mm complete all as specified and direcetd. 20 Each Excess(+) Full Conversion INR

80 Supply and fixing brass tee, elbow, reducer, coupling and all other fittings of size 25mm complete all as specified and direcetd. 15 Each Excess(+) Full Conversion INR

81 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. 30 RM Excess(+) Full Conversion INR

82 Cutting into existing manholes for connecting new drains of 100mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified. 2 Each Excess(+) Full Conversion INR

83 M & L Mild Steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 50 Kg Excess(+) Full Conversion INR

84 S & F in repair PVC (SWR) 110 mm size pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and directed. 10 RM Excess(+) Full Conversion INR

85 S & F in repair PVC (SWR) 110 mm size pipes single socketed, in any length with rubber ring joints, fixed to walls complete all specified and directed. 15 RM Excess(+) Full Conversion INR

86 S & F in repair PVC (SWR) 75 mm size pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and directed. 5 RM Excess(+) Full Conversion INR

87 S & F in repair PVC (SWR) 75 mm size pipes single socketed, in any length with rubber ring joints, fixed to walls complete all specified and directed. 20 RM Excess(+) Full Conversion INR

88 S & F in PVC (SWR) 110 mm bends, any radius complete all specified and directed 10 Each Excess(+) Full Conversion INR

89 S & F 75mm bore PVC (SWR) bend, any radius with / without access door complete all specified and directed 7 Each Excess(+) Full Conversion INR

90 S & F in PVC (SWR) 110 mm Tee, equal or unequal complete all specified and directed 4 Each Excess(+) Full Conversion INR

91 S & F 75mm bore PVC (SWR) Tee, equal or unequal complete all specified and directed 5 Each Excess(+) Full Conversion INR

92 S & F PVC (SWR) 75 mm bore floor trap including jointing with solvent cement complete all as specified & directed. 12 Each Excess(+) Full Conversion INR

93 S & F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed. 5 Each Excess(+) Full Conversion INR

94 S & F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of 110mm dia pipe complete all as specified & directed. 5 Each Excess(+) Full Conversion INR

95 S & F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of 75mm dia pipe complete all as specified & directed. 5 Each Excess(+) Full Conversion INR

96 S & F in repairs CP grating 100mm dia with/without waste hole complete all as specified & directed. 10 Each Excess(+) Full Conversion INR

97 S & F in repairs CP extension nipple of 20mm bore complete all as specified & directed. 10 Each Excess(+) Full Conversion INR

98 Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc as directed. 314 Per point Excess(+) Full Conversion INR

99 Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

100 Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls complete all as specified and directed. 339 RM Excess(+) Full Conversion INR

101 M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following. (a) One light/fan point controlled by one switch. NOTE: Switch and socket to be measured and paid for separately):- 180 Per point Excess(+) Full Conversion INR

102 (b) All as per item No 101 but one socket outlet point 5 Amp on an independent board complete all as specified and directed. 56 Per point Excess(+) Full Conversion INR

103 All as per item No 102 but on the same board complete all as specified and directed. 18 Per point Excess(+) Full Conversion INR

104 All as per item No 101 with one bell point controlled by one bell push. 2 Per point Excess(+) Full Conversion INR

105 All as item no 102 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board. 60 Per Point Excess(+) Full Conversion INR

106 S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed. 254 Each Excess(+) Full Conversion INR

107 Ditto as item 106 but using 15 Amps complete all as specified and directed. 60 Each Excess(+) Full Conversion INR

108 S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed. 60 Each Excess(+) Full Conversion INR

109 S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed. 74 Each Excess(+) Full Conversion INR

110 S & F ceiling rose surface bakelight two to three terminal complete all as specified and directed. 137 Each Excess(+) Full Conversion INR

111 S&F Modular door Bell push 6A 1 module size of approved make ,with all necessary fixing and electrical connections complete all as specified and directed. 2 Each Excess(+) Full Conversion INR

112 S&F fan regulator electronic, step up socket type, 230 volt and conection complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

113 Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed. 54 Each Excess(+) Full Conversion INR

114 S&F LED light fitting mirror type with high out put diffuser 2 feet ,10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with driver holder and LED lamp including connceting up with three core flexbile copper conductor cable of suitable size complete. 5 Each Excess(+) Full Conversion INR

115 S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. 10 Each Excess(+) Full Conversion INR

116 Supply and Fixing wall/surface mounting luminaires 2x2 feet mm, 35/36 watt, 220 V AC recessed type 6500k , min burning hours 25000 ,CRI 80 with high efficiency PMMA diffuser soft glare free light complete with driver ,holder & LED lamp suitable for roof ceilling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed. 68 Each Excess(+) Full Conversion INR

117 S&F Modular AC BOX Power unit with Socket Plug top and MCBs with Single pole and neutral enclosure with a two pin and one pin for earth plug and socket complete with one single pole MCB 25 Amp 'C' curve with all necessary internal wiring connection and fixing arangement complete all as specified and directed. 12 Each Excess(+) Full Conversion INR

118 S&F Wall mounted swing fan, opal white, AC single phase, 230 Volt heavy duty of size 300 mm sweep, speed 1330 RPM with MIN air Delivery 45 CMM, Power consumtion 45 Watt with 60-90 degree oscillation with pull chain control with product warranty 2 years and making connection with three core PVC insulated and sheathed copper conductor flexible cable complete all as specified and directed.e 12 Each Excess(+) Full Conversion INR

119 S&F exhaust fan, steel body AC single phase, 230 V with blades, frame and louvers of at sweep:-380mm complete all as specified and directed.. 6 Each Excess(+) Full Conversion INR

120 S&F exhaust fan, made of sturdy Engineering plastic complete with louvers shutters ,voltage 230V,50Hz, RPM 1200,Copper winding of sweep 250mm complete all as specified and directed. 3 Each Excess(+) Full Conversion INR

121 M&L for sub main wiring with four single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed & surface to match of walls /ceiling complete all as specified and directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate) 144 RM Excess(+) Full Conversion INR

122 M&L for sub main wiring with two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed & surface to match of walls /ceiling complete all as specified and directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate) 195 RM Excess(+) Full Conversion INR

123 S&F in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos. complete all as specified and directed. 1 Each Excess(+) Full Conversion INR

124 S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA complete as directed. 1 Each Excess(+) Full Conversion INR

125 S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’) 1 Each Excess(+) Full Conversion INR

126 S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 8 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified and directed. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’) 8 Each Excess(+) Full Conversion INR

127 S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete all as specified and directed. 9 Each Excess(+) Full Conversion INR

128 S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and directed. 58 Each Excess(+) Full Conversion INR

129 Taking down ceiling fan/Wall fan/exhaust fan any type and any location and refixing after writing same MES number in black colour complete all as specified and directed 10 Each Excess(+) Full Conversion INR

130 Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq mm 3.5 core complete all as specified and directed. 105 RM Excess(+) Full Conversion INR

131 Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including framing bottom surface for laying cables complete all as specified and directed. 18.23 Cum Excess(+) Full Conversion INR

132 Returning, filling in soil watering and ramming into layers of 25cm after laying of cable all as specified and directed. 9.38 Cum Excess(+) Full Conversion INR

133 Disposal of surplus soil n.exc 50M distance from the starting point and depositing where directed at a level not exc. 1.5m complete all as specified and directed. 8.84 Cum Excess(+) Full Conversion INR

134 M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) all as specified and directed 7.29 Cum Excess(+) Full Conversion INR

135 Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable all as specified and directed. 0.783 Per 1000 Excess(+) Full Conversion INR

136 M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 3 of MES SSR Pt-I 2009 print and as directed. 2 Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures

Please Enable Macros to View BoQ information