PETTY REPAIRS TO B/R ASSETS IN AT DMRL, ATC DEVATHALADUTTA, RCMA (MAT), DCS LINE ATC DEVATHALADUTTA AND PCDA UNDER AGE B/R II HYDERABAD

Amount

Attending day to day complaint related to carpenter works like easing of steel/wooden/Aluminiam Door and Window, repair/replacement of Door/ Window shutters and Cupboard at any floor/ height, Repair/Replacement of hardware items/mirror/glass shelf/Glass panes etc.by deploying carpenter and helper complete all as specified and as directed.

Attending day to day complaint related to plumbing works like Repair / Replacement of bib taps/stop cocks/gate valves / pillar cocks/ float valves/Wall mixers and removal of air lock / blockage in 15mm / 20mm bore GI/ UPVC/ CPVC water tubing cleaning the pipe and fittings etc and refixing the same in position and Repair / Replacement of Rain water pipes any dia etc and plumbing Repair / Replacement of sanitary fittings / plumbing fittings etc by deploying plumber and helper complete all as specified and as directed.

Attending day to day complaint related to any type of welding works n.exc 2.5cm in length and thick of metal to be welded n.exc 6mm thick like welding to steel frame works/ hinges/ glazing bars etc. by deploying welder and mazdoor. Note:- Welding rod machine misc required is deemed to be included in the quoted rates.

Attending day to day complaint related to sewage cleaning and removing blockage of kitchen/bath/IWC/EWC/ pipe line / manhole at any length and any depth and removing of waste soil from MH/Gully Traps and Incl removing waste material for site etc by deploying sweeper and incl sewage drain cleaing Jetting Equipment and mortars, any length.

Notes for Ser item Nos 1 to 1.04 :-The quoted rate of contractor shall comprise the following :-(i) Contractor shall provide sufficient skilled and unskilled manpower on requirnment basis as directed by JE/Engineer in charge for attending and completing the complaints as per the users satisfaction. However, the number of skilled and unskilled manpower shall be increased as directed by enginner in charge depending upon the requirements/ number of complaints registered at the complaint center. In case of failure on providing sufficiet manpower by the contractor, a penalty at the rate of Rs 1000 per skilled person per day and Rs 600 per unskilled person per day shall be levied on the contractor and recovery for the same shall be affected from contractor's dues. (ii) Complaints cell for receiving complaints from users shall be opened by the contractor from 09.00 am to 0 5.00 pm at MES service centre of AGE B/R II Secubad office under GE (R&D) Kanchanbagh. The complaints pertaining to sewage cleaning and opening of blockage and plumbing works etc. against serial item No 2 and 4 shall be attended and completed within 24 hours and other complaints related to carpenter works and welding works against serial item Nos 1 & 3 shall be completed in 48 hours time after lodging/ receipt of complaints. Contractor shall ensure that all the complaints shall be attended and completed within above prescribed schedule/ time period, failing which, a penalty at the rate of double the quoted rate for that particular trade work/cmplaint per day till the satisfactorily completion of complaint shall be levied on the contractor and recovery for the same shall be affected from contractor's dues.

(iii) : For each complaint in different location, a separate docket slip shall be prepared by the contractor/ his representative and handed over to related tradesman, etc. for attending the complaint and after satisfactorily completion of complaint, docket slip shall be submitted to concerned executive on the date of register of complaint, which shall be got signed from the occupant. (iv) : Format of docket slip and complaint register which shall be kept in complaint cell. Stationery i.e. Docket slips, complaint registers, Store issue register etc. shall be provided by the contractor without any extra cost to the department and cost thereof shall be deemed to be included in quoted rates by the contractor against respective items of schedule 'A'. Contractor/His authorised rep shell be Collect / Replace the complaint registers every day (Except Sunday) from SAGAR Enclave, VARUN Vihar and DMDE/ Transit Offrs Mess and Complaint slip shall be prepared at AGE B/R II Secbad office and handed over to the tradesmen and necessary entry (Docket no & Date) shall be made in the complaint register and submite to concerned JE same day.(v) : Necessary transportations, tools, plants, ladders, cleaning rods/Bamboos, etc. including nails, screws, wooden/Plastic gatta, PVC washers, cotton thread/Tefflon tape, Jumper valves, white lead, flush washers, rawel plugs and other similar minor accessories ( except items mentioned against Srl item Nos 62 to123 herein after ) required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost thereof shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'.

(vi) : All the skilled tradesmen of individual trade shall possess certificate from ITI/NICMAR/similar reputed and recognised institute by state/central Govt or having 10 years experience in the concerned individual trade and contractor shall submit the same to engineer in charge for the verification.(vii) : In case of welding to steel items required to rectify/ complete the complaints, the welding set and welding rods shall be provided by the contractor without any extra cost to the department and cost thereof shall deemed to be included in qouted rate of contractor against srl item no 4 of schedule 'A'.(viii) : Materials mentioned against serial item Nos 14 to 91 hereinafter required for execution of complaints shall be supplied by the contractor and paid separately under respective items of schedule 'A' as supply only.

Supply only following materials required for attending day to day complaints against serial items 1 to 4 here in before all as specified and directed :- Notes for Srl item Nos 14 to 92 : - (i) The make and brand of items shall be as mentioned in the Appendix 'B' of tender documents and as approved by GE. (ii) Materials supplied by the contractor shall be deposited first in store yard of AGE B/R Secbad and same shall be issued by the department to the contractor/his authorised rep on daily basis as per nature of complaint and as required at site.

Supply only 16 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.

Supply only 20 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.

Supply only 20 mm bore of CPVC plain fiitings (Elbows, Tee, Cupling & Reducer sucket) complete all as directed.

Supply only 16mm Brass elbow suitable for 16mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed

Supply only 20mm Brass elbow suitable for 20mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed

Supply only 16mm Brass Tee suitable for 16mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed

Supply only 20mm Brass Tee suitable for 20mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed

Supply only 20mm Male brass threaded adaptor suitable for 20mm bore CPVC pipe including fixing to pipe complete all as specified and as directed

Supply only 20mm female brass threaded adaptor suitable for 20mm bore CPVC pipe including fixing to pipe complete all as specified and as directed.

Supply only 32 mm bore PVC waste pipe for WHB complete all as directed

Supply only 40 mm bore PVC waste pipe for urinals/sink complete all as directed

Supply only waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed

Supply only waste fitting brass chromium plated 40mm dia for sinks all as specified and directed

Supply only 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe.

Supply only 100 mm dia stainless steel grating for nahani traps with or without hole as required for waste pipe complete all as directed

Supply only handles suitable for PVC low level flushing cistern of any type complete all as specified and directed.

Supply only tubular towel rail 20 mm dia D type brass chromium plated type 60 cm long between the flanges.

Supply only 15 mm float valve for low level flush tank.

Supply only PVC Syphon for low level flushing cistern assembly

Supply only 15 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe.

Supply only 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as directed.

Supply only PVC connection15 mm x 600 mm with both side check nuts and washer compactable with hot & cold water.

Supply only 15 mm bore dia angle valves, cast copper alloy,chromium plated fancy type, screwed down, high pressure, with capastan head, and screwed both ends.

Supply only 20mm bore gun-metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed to bore of pipe 20 mm complete all as directed

Supply only Plastic water closet seat, closed pattern with flat bottom and cover fixed with MS chromium plated hinging devise.

Supply only Plastic water closet seat, closed pattern with recessed bottom and cover fixed with MS chromium plated hinging devise suteble for all

Supply only viterous china WHB white flat back size 550 mm x 400 mm with brackets for fixing.

Supply only 125 mm dia brass chromium plated shower rose with swivel joints and stainless steel arm complete

Supply only pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed

Supply only CP brass two way bib tap of 15mm bore dia with capastan head, complete all as specified and directed.

Supply only CP brass 3 in 1 wall mounted mixture with telephone hand shower complete..

S&F in repairs glass shelf of size 400x200 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated 150mm lenght brackets on both sides fixed in position complete all as specified and directed.

Supply only CP Health faucet,case-copper alloy, chromium plated including all necessary fittings complete all.

Supply only 15 mm bore bib taps, cast copper alloy chromium plated long body fancy type with capstan head, screwed down.

Supply only 15-mm bore bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down.

S&F in repairs 15 mm dia Swag neck piller/wall mounted taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron/CPVC pipe complete all as directed. ISI marked

Supply only 40mm dia mild steel, bright finished cup board knobs with nuts and screws.

Supply only stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc.

Supply only 100 mm butt hinges, medium weight, cold rolled mild steel.

Supply only 125 mm size extruded aluminium alloy handles, fabricated type with plate, matt or anodised finish.

Supply only floor door stopper of alumium alloy body with double legs and 140 mm long with screws to shutters.

Supply only floor door stopper of brass body and tongue and with hard drawn steel spring 140 mm long with screws.

Supply only curtain rod 25 mm dia stainless steel of grade 304 with end finials etc.

Supply only stainless steel bracket of grade 304 suitable for 25 mm dia curtain rod fixed in position with stainless steel screws complete.

Supply only stainless steel peg set of 06 hooks.

Supply only MS powder coated curtain rod 25 mm dia of standard thickness and one pair of suitable brackets complete.

Supply only MS powder coated fancy type curtain brackets for 25 mm dia curtain rod and fixed with screws and PVC sleeves complete.

Supply only Rotational moulded polythylene water storage tanks,three layers white in colour (Cylindrical vertical with threaded lid) hoisted and fixed in position, 750 litres capacity.

Supply only Rotational moulded polythylene water storage tanks,three layers white in colour (Cylindrical vertical with threaded lid) hoisted and fixed in position, 1000 litres capacity.

Supply only 3 mm thick sheet glass, ordinary quality.

Supply only 3 mm thick figured glass, pin headed type.

Supply only Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm length of bolt complete.

Supply only mild steel door spring 200 mm long including roller and roller plate complete.

Supply only brass mortice lock 100mm long vertical type 4 levers fixed to shutter with 2 duplicate keys with handles complete.

Supply only SS cylindrical lock suitable for 30 to 40 mm thick shutter with duplicate keys complete.

Supply only brass spindle suitable for CP Bib tap/ stop cock/ angle cock/ pillar tap etc

Supply only brass bullet spindle suitable for Jaquar/Hindware/Parryware for CP Bib tap/ stop cock/ angle cock/ pillar tap/Wallmixer etc

Supply only M- seal in 100 grams packets

Supply only white cement 1 kg pkt

Supply only oil putty

Supply only hydraulic door closer aluminium body

Supply only PTMT bib tap 15mm bore of any colour, screwed for iron pipe complete ( Min weight 90 gms)

Supply only PTMT stop cock / angle valve 15mm bore of any colour, screwed for iron pipe complete ( Min weight 90 gms)

Supply only Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms)

Supply only GI tubing 15mm bore medium grade

Supply only GI tubing 20mm bore medium grade

Supply only GI fittings i.e Tee, Elbor, Socket, Union, reducer etc of 15mm dia

Supply only GI fittings i.e Tee, Elbor, Socket, Union, reducer etc of 20mm dia

Supply only GI nipple of 50x15mm, 75mm x 15mm , 100x 15mm

Supply only GI nipple of 50x20mm, 75mm x 20mm , 100x 20mm

Supply only stainless steel plate rack of size 100cm x 90cm

Sypply only stainless stee sink with drain board of overall size 915mm x 460mm

Supply only PTMT Health faucet, including all necessary fittings complete all.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls as in rain water pipes complete all as directed

S & F in repairs PVC (SWR) bends 110mm bore any radius for rain water pipes complete all as directed

S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position including making necessary holes in walls or parapet and making good with cement mortar 1:4 and taking down old rain water pipe of any description and in any position complete all as specified and directed.

S&F in repairs 150mm PVC (SWR) bends any radius complete all as directed

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) with P or S trap, white including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe complete all as directed.

S&F in repairs viterous china WHB white flat back size 550 mm x 400 mm excluding taps and including brackest , waste coupling , waste pipe and PVC connection and including cutting for & pinning in ends of brackets complete all as directed.

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) as in parapets of two to three storeyed buildings including demolition of brick work built in cement mortar complete all as specified

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.and removing debris outside MOD premises complete all as specified and directed

M&L 15mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces, finished even & smooth surfaces without using extra cement complete all as specified.

M&L for preparation of new plastered or un-plastered surface of walls and applying two coats of distemper oil emulsion over a coat of primer on walls complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.

M&L cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) 75 mm thick as in plinth protection surface finished even and fair without using extra cement complete all as specified and directed.

M&L for Non- skid coloured ceramic tiles of any design and pattern, 300X300X7 to 8 mm thick, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles.including dismantling existing tile work with screed bed.

M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles . including dismantling existing tile work with plaster.

M&L for light coloured vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. including dismantling existing tile work with screed bed.

All as per item no 94 above but as in skirting and vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10 mm thick backing coat of cement mortar 1:4 including dismantling existing tile work with plaster complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

S&F aluminium handles cast type anodised 200 mm ISI Marked complete all as specified and directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section ISI Marked complete all as specified and directed.

S&F floor door stopper of alumium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm length of bolt complete all as specified and directed.

S & F mild steel door spring 200 mm long including roller and roller plate complete all as specified and directed.

Disconnecting existing tanks n.exc 500/1000litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Bio Wash, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified.

S & F in repairs Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L in repairs 19mm thick pre-laminated particle board exterior grade pre-laminated on both sides with decorative choice lamination and other side balancing white lamination with round beading fixed with screws to timber frame work as in cup board shutters, pelmet boxex, shelves and similar items, including taking down old laminated work of any description complete all as directed

S&F in repairs Zeebra venetian blinds roller type double layer with polyester fabric of approved colour & pattern including powder coated aluminium fittings of top rail .weight and nylon button /loops etc fixed complete all as specified and as directed.

M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, as in floors/pavings laid over 40 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete in all respect and all as specified.

M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x22 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile and screed bed of any descrption complete all as directed by Engr-in-charge

S&F in repairs false ceiling with light weight calcium silicate tiles of spin tone surface textured 'Aerolite' make or equivalent of size 595*595mm having 15mm thick densified micro look edge in true horizontal level suspended on shilhouette profile suspension system of Grid made from hot dipped G.I steel section potary stitched double webbed power coated white. fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I adjustable rods with galvanized level adjustment clips spaced as required at any heights as per specifications, including taking down existing ceiling board with frame work complete all as per direction of Engineer-in-charge.

Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed

Supply and fixing in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement with grating and union for discharge pipe and including provision of brass urinal spreader, CP waste coupling and PVC waste pipe complete all as specified and as directed Make:Hindware or equivalent

M&L providing plain cement concrete type B-0, (1:2:4) (12.5mm graded stone aggregate) in roof padding, to maintain proper slope on roof slab and including demolition of concrete complete all as specified

M&L for brushing neat cement slurry with 3 Kg of cement per Sqm over the RCC slab and sides complete all as directed by Engineer -in- Charge.

M&L for rendering 10mm in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with Dr Fixit by weight of cement as per manufacturer instruction shall be carried out complete all as specified and directed by Engr-in-Charge.

M&L water proofing treatment with polymeric standard membrane of weight not less than 3kg per sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) laid over primed surface by forced application complete. Shall be fused uniformly by LPG torch flame on horizontal/vertical/slope surface on roof and appplying two coat of aluminium paint @100ml per sqm over APP membrabe complete all as specified and directed by Engr-in-Charge.

M&L for cutting grooves in brick wall 70mm wide and 65mm deep and sweeping horizontal face of groove with cement mortar (1:3) and making good in CM 1:3 after inserting membran into the groove complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces in roof facias,fins, chajjas,parapets and similar locations, finished even and smooth without using extra cement and using SBR latex emulsion @ 200 ML/Per 01 Bag of cement all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; handrails; railings; framework of valley gutters and similar work con- forming to Fe.290.Gde-E-165de E-165

M&L for prepration of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls/ceiling and applying one coat oil bound distemper complete all as directed.

S&F Powder coated of any colour (minimum thickness of powder coating 50 micron), aluminium partition, door frame, shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges,anodised aluminium snap beading, screws etc. complete all as specified.

S&F factory made solid PVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M.S. Square tube 19mm x 19 mm of gauge complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed.

S&F in repairs Urinal sensor, solonet Valve, Battery box along with batteries complete all as directed.

S&F in repairs WHB sensor, solonet Valve, Battery box along with batteries complete all as directed.

Renewing cement concrete chequered tiles / inter locking tiles in patch, area exc 5 Sqm including removing and cleaning old tiles, preparing bed and laying or setting, jointing and pointing new or old tiles, including replaced damage tiles & providing PCC (1:4:8) sub base where reqd complete all as specified and directed.

NOTE FOR CONTRACTOR APPLICABLE TO ALL SCHEDULED ITEMS NO 01 TO ITEM NO 121 :- (a) Contractor's supervisor will collect complaints slip from AGE B/R Secundrabad office for daily bases at 9.00 AM and feedback should be provide same working day at 05.00 PM. along with details of complaints done / not done, reason for not done, material used and User/Occupant signature on complaints slip without fail. If the contractor or his representative fail to collect the complaints from the complaint cell on daily basis, a penal recovery of Rs.2500/day shall be recovered from the RAR/bill due to contractor. (b) The quoted rate included material, Labour, T&P and the demolished / old items should be deposit store / disposal from the site etc, as per direction of Engr-in-Charge. No extra will be paid. (c) Plumber complaints should be complete same day, Joinery and Masonry complaints should be complete with in 48 hrs without fail.

sandhya enterprises (BID ID -3324508)

SUN LIGHT HOUSE (BID ID -3325362)

ELEVATORS MAINTENANCE ENGINEER WORKS (BID ID -3325150)

M/s Kasturi Pedda Subbaiah Enterprises/M/s K.P.S Enterprises (BID ID -3324706)

S Anjan Reddy (BID ID -3321964)

M/S SARASWATHI CONSTRUCTIONS (BID ID -3323706)

PAVAN ENTERPRISES (BID ID -3321521)