SPECIAL REPAIR TO CHAIN LINK FENCING AT ANCEPTA, BRICHGUNJ MIL STATION, SRI VIJAYA PURAM

Dismantling posts or struts (wood, steel or R.C.C) any section embeded in cement concrete, including taking out embedded portion and making good disturbed ground etc complete all as specified and directed by Engr-in-Charge.

Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out in soft/loose soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance n.exc 50m and making good surfaces etc complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC coated (1mm thick only ) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50x50 mm and thickness of wire n.exc 2.83 mm fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires all as specified and directed by Engr-in-Charge. Note :- 1.Weight of chain link fencing per Sqm shall be ascertained by B.O.O to be as convened by GE. 2. This rate is exclusive of rate of S&F PVC coated MS flat MS angle etc. shall be measured and paid separately at item No. 07. 3. Supply only of mild steel bolts is measured and paid separately at item No. 8.

S&F PVC coated mild steel angles, flats etc (PVC coating not less than 0.7mm thick) as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) incl all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-265 all as specified and directed by Engr-in-Charge. Note :- The frame of PVC coated MS section shall be square or rectangle or rhombus shaped based on site conditions and PVC coated chain link fencing shall be fixed using PVC coated MS flats and MS nut bolts at all the four sides of frame. The drg of standard frame shall be approved by GE before commencement of work at site.

Supply only mild steel bolts with hexagonal or square head one end and scewed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10cm long dia metre on nech exceeding 11 to 15 mm complete all as specified and directed by Engr-in-Charge.