Furniture & Furnishing Work of Upgradation of 560 Bedded Residential School to 720 Bedded (Co-Ed) of Rajkiya Ambedkar Resedential School at-Forbesganj in Dist-Araria Under SC&ST Department.

Bihar State Building Construction Corporation Ltd.

Project : Estimate Of Furniture & Furnishing work For UPGRADATION OF 560 BEDDED RESIDENTIAL SCHOOL CONSTRUCTION TO 720 BEDDED (CO-ED) RAJAKIYA AMBEDKAR RESIDENTIAL +2 HIGH SCHOOL AT FORBESGANJ IN DIST-ARARIA UNDER SC & ST WELFARE DEPARTMENT BOQ

Estimated Cost 6,527,399.00

Time of completion

S.No SOR No. Specification Unit Qty Rate (Rs.) Amount (Rs.)

1 Bed Dimension : 2000 x 900 x 650 mm (H) Structure is made up of 40 mm dia CRC tube with thickness 18 gauge. Horizontal base is made from steel sheet the thickness 14 gauge. Horizontal base will be stiffened with appropriate longitudinal 3 v shape sheet and lateral stiffeners 2 steel pipes with powder coating. Manufactured out of ISO 9001, ISO14001 and OSHSAS 18001 certified Plant and product certified for BIFMA performance test (Size : 2000 x 900 x 650 mm (H) Each 162 11000.00 1,782,000.00

2 Mattress 2" thick (size 75" x 36") Supplying and fixing of Mattress (size : 75"x36" x 2" thick) at site, with complete in all respect or as per direction of E/I Each 162 4400.00 712,800.00

3 Study Table & Chair Dimension : DESK - 600 W x 480 D x 750 H SEAT - 868 H x 500 W x S 450 Finish/Coating : Powder Coating Material : MILD STEEL TUBULAR SECTION OVAL Tube 35 x 15 SQ. Tube 25x25 and PLB & Moulded wood Total Weight : 23Kg Available Base Frame : Knock down Features : >SEMI KNOCKDOWN > 11 TANK HOT ZINC PHOSPHATING PRE TREATMET PROCESS > Powder Coated Each 160 6800.00 1,088,000.00

4 Wadern's Chamber Table Size: Executive Desk Size - 1800mm (W) x 900mm (D) x 750mm (H) Side Unit - 1800mm (W) x 600mm (D) x 675mm (H) Combination of metal and wood reflects dynamism. Sleek floating top gives aesthetic and trendy look. Open rectanglular section legs with small modesty gives the table trendy, airy open look. Each 1 38500.00 38,500.00

5 Wadern's Chamber Chair Seat/Back Assembly: The seat is made up of 1.2 ±0.1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA- P14-18 and upholstered with fabric moulded Polyurethane Foam. The back is made up of 1.2 ±0.1cm hot pressed plywood upholstered with fabric moulded polyurethane foam. The back ply and foam is designed with contoured lumber support for comfortable seating posture. Mid Back Size - 48cm (W) x 64.5cm (H). Seat Size - 51cm (W) x 48cm (D) Armrest (Adjustable): The armrest top is made up of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height is adjustable up to 6.5±0.5cm in 5 steps & also has swivel adjustment of 22° ± 2° on both sides. Knee Tilt Synchro Mechanism with Seat Deapth Adjustment Mechanism: The mechanism is designed with the following features - 360° revolving type, Single point control, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4-position locking with anti-shock feature, Seat back tilting ratio of 1:2 & Seat depth adjustment of 6.0 ± 0.5cm can be locked in 6 positions. Adjustable Backrest: The backrest consists of a sliding up down mechanism, which can be adjusted in the range of 7.5 ± 0.5cm and can be locked in 4 positions for correct position of lumber support. Pneumatic Height Adjustment: The pneumatic height adjustment has an adjustment of 9.0 ± 0.3cm. Pedestal Assembly: The pedestal is fabricated from 0.2 ± 0.2cm thick HR sheet (IS : DD 1079 / HR skin pass), chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.0±0.5cm Pitch-center dia. (76.0 ± 1.0cm with castors). Twin Wheel Castors: The twin wheel castors are injection moulded in black Nylon. Each 1 10400.00 10,400.00

6 Common room office / Office table Table for common room (Size : 1200 x 750 x 760) Supply, Fabrication & Installation of Dining table made of Wood veneer / Powder coated MS frame with 12mm thick glass top complete in all respect. as per drawing and direction of E.I. Each 6 8800.00 52,800.00

7 Dining Table Work Surface: 25mm Thick (±1mm) Base Material - 25mm MDF Board on top PU painting of Minium 2H hardness with 75% glass as per color chart, combination color graphics on the centre. Color as per color chart. Brown laminate on bottom. Specially profiled edge for comfort. Understructure: Bend pipe understructure of MS. Powder Coated. Pipe dia. 38mm, 2mm thk. Understructure fitted with top by SS machine screws. Legs: MS Powder coated legs for PU top & SS legs for membrane top. 38mm dia pipe legs are fixed with understurcture and table top. Glide: Plastic Glide fixed at the understructure to prevent the damage of table top druing stacking. Size: Ground Base - 2450mm (L) x 1175mm (W). Surface Top - 2400.8mm (L) x 1050.4mm (W) & Height - 750mm (H) Each 10 32000.00 320,000.00

8 Dining Chair Seat/Back: Seat & Back are injection moulded in PP. They are snap fitted on the understructure assembly and fixed with self-taping screws Approx. Back Size : 37.0cm (W) x 25.5cm (H) Approx. Seat Size : 40.5cm (W) x 40.5cm (D) Understructure Assembly: The understructure assembly is a welded frame assy. with the upper frame made of dia. Ø 1.9±0.02cm x 0.2±0.016 thk. and legs made of Ø 1.9±0.02cm x 0.16±0.0128cm thk. M.S. E.R.W tubes and black powder coated (DFT 40-60 microns) Each 80 2550.00 204,000.00

9 Common room Chair Size : Depth (D) - 57.0 cm Width (W) - 58.0 cm Height (H) - 88.0 cm Seat Height (SH) - 47.5 cm The seat & Back are made up of Cushion covered with rexine. Behind all this is a robust tubular framework that makes the chairs durable. Each 34 3600.00 122,400.00

10 Principal / Chamber Table Size: Executive Desk Size - 1800mm (W) x 900mm (D) x 750mm (H) Side Unit - 1800mm (W) x 600mm (D) x 675mm (H) Combination of metal and wood reflects dynamism. Sleek floating top gives aesthetic and trendy look. Open rectanglular section legs with small modesty gives the table trendy, airy open look. Each 1 38500.00 38,500.00

11 Class room Desk Class room desk - 2 seater with pedestal storage unit (for Class room) & sitting Desk (size : 1050 x 450 x750 (H)) Supply,Fabrication & Installation of class room table top 19 mm thick prelimanated board with 2mm PVC edge banding , supported on MS square Hollow section (size : 40 mm x 40 mm) frame complete with wire manager at table top all fitting & assecories as per drawing & direction of E/I. Each 80 9000.00 720,000.00

12 Principal Chamber Chair Seat/Back Assembly: The seat is made up of 1.2 ±0.1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA- P14-18 and upholstered with fabric moulded Polyurethane Foam. The back is made up of 1.2 ±0.1cm hot pressed plywood upholstered with fabric moulded polyurethane foam. The back ply and foam is designed with contoured lumber support for comfortable seating posture. Mid Back Size - 48cm (W) x 64.5cm (H). Seat Size - 51cm (W) x 48cm (D) Armrest (Adjustable): The armrest top is made up of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height is adjustable up to 6.5±0.5cm in 5 steps & also has swivel adjustment of 22° ± 2° on both sides. Knee Tilt Synchro Mechanism with Seat Deapth Adjustment Mechanism: The mechanism is designed with the following features - 360° revolving type, Single point control, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4-position locking with anti-shock feature, Seat back tilting ratio of 1:2 & Seat depth adjustment of 6.0 ± 0.5cm can be locked in 6 positions. Adjustable Backrest: The backrest consists of a sliding up down mechanism, which can be adjusted in the range of 7.5 ± 0.5cm and can be locked in 4 positions for correct position of lumber support. Pneumatic Height Adjustment: The pneumatic height adjustment has an adjustment of 9.0 ± 0.3cm. Pedestal Assembly: The pedestal is fabricated from 0.2 ± 0.2cm thick HR sheet (IS : DD 1079 / HR skin pass), chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.0±0.5cm Pitch-center dia. (76.0 ± 1.0cm with castors). Twin Wheel Castors: The twin wheel castors are injection moulded in black Nylon. Each 1 10400.00 10,400.00

13 Class room/ Teacher table with Chair,office&Lab Table for class room/office (size : 1200 x 900 x 750) Supply, Fabrication & Installation of table made of Powder coated MS frame with 18mm thick prelaminated board top complete in all respect with wire manager lockable drawers etc. all complete as per drawing and direction of E/I Each 4 8800.00 35,200.00

14 White Board Providing and fixing in position magnatic white board on walls including teak wood edge moulding. Complete with all necessery hardware, polish etc as per direction of E/I Size : 8' x 4' Each 4 14500.00 58,000.00

15 3 seator / Chrome chair 3 sector chair (Chrome) Made of Cushion with high density cold cured self -skinned pre -molded foam of 50-60 density the shape of plywood. Upholstery is done by using high-pressure pneumatic spray glue and pneumatic press over crome base & legs etc. all complete as per direction of E/I Each 4 14300.00 57,200.00

Furnishing work

Sl no/SOR-2022 Cupboard/Wardobre

16 9.1 Providing wood work in frame of doors,windows clerestory windows and other frame ,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)

17 9.129 Providing and fixing cup board shutters 25mm thivk ,with Pre -laminated flat pressed three layer particle board or graded wood particle board IS :12823 marked ,exterior grade (grade I type II),having one side decorative lamination and other side balancing lamination and including IInd class teak wood lipping of 25mm wide X 12mm thick with neccessary screw and bright finished stainless steel piano hinges ,complete as per direction of the Engineer -in Charge. sqm 204.120 1746.50 356,496.00

18 9.9 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.

19 9.92 Providing and fixing chromium plated brass handle with necessary screws etc. complete.

20 9.74 Providing and fixing bright finished brass parliamentary hinges with necessary screw etc. complete:

21 9.53 Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame wuth 10mm diameter bolts ,nuts and wooden pluges and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1cement :3coarse sand :6 aggregate 20mm nominal size) each 486.00 130.80 63,569.00

22 9.18 Providing and fixing Pre-laminated flat pressed 3layer (medium density )particle board or graded wood particle board IS 3087 marked ,with one side decorative and other side balncing lamination Gradde I ,Type II exterior grade IS :12823 marked ,in shelves with screw and fitting wherever required ,adges to be paid sepaartely).

Total Rs. 6,462,424.00

Add 5.36% GST ON SCHEDULED ITEM Rs. 64,975.00

Net Total Rs. 6,527,399.00