RENOVATION 2026

Wıring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed steel conduit, with modulars witch ,modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in

2x 1.5 sq.mm+1x 1.5 sq.mmearth wire

2x 4 sq. mm + 1x 4 sq. mm earth wire

(https://web.telegram.org/a/4X4sq.mm塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2X 10 sq. mm +1X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in frontonsurfaceorinrecess,includingprovidingandfixing6pin5/6&15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying &fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6way,Doubledoor

Supply in gand fixing 5 Ato 32 A rating, 240/415V, 10 kA, "C" curve,

Single pole

Double pole

(https://web.telegram.org/a/sq.mm塹ᴻ䡿ⲯ嶂藄挧ꮥ)

Supplying, Installation, Testing and commission in go f Passive Infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load up to 10Amp, for mounting height up to 3 meter and for 5m diameter coverage are a along with necessary fixing arrangements 1/c programming at site etc. complete as required

SITC of surface/wall mounted 1x9 -10 W)LED batten in 2 feet length Mirror light with aluminum housing and inter grated electronic driver, CCT Nom) 4000K-65000K,CRI>80,PF>0.95,THD<10%,IP20&IK02with minimum

Supplying installation, Testing and commissioning of single phase 220 Volt, Stain less steel Hand Dryer minimum1800 watt rated power and dry time 8to 10 second earthling complete etc as required.

Supplying, installation, testing & commissioning of metallic heavy duty Exhaust fan of following specification complete with louver shutters including cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in- charge.300mm sweep, Air Delivery: not less than 1150 CMH, RPM-900

SITC of 10 liter storage capacity instant water geyser having SS 304 material inner tank ,heavy duty heating element, auto cut off ,minimum 2000 watt rated