REPAIR/ REPLACEMENT OF E/M NATURE OF WORKS AND INTERNAL WIRING INCLUDING FITTINGS AND FIXTURES AT VRC AND KHYBER LINE AND PROVN OF 88 CEILING FANS IN BLDG NO. P-07 TO P-17 (EACH BLOCK OF 04 QTRS) JCOs MD ACCN AT DUNDAHERA MIL STN GURGAON AND PROVN OF

Amount

Attending complaints for checking the existing electrical items for continuous electric supply including carrying out minor repair(s) etc as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc., Attending minor repair(s) such as testing, connections, fittings, nut, bolts screws etc to ceiling fan, exhaust fan (without taking down) etc, emergent complaints i.e. no light, earth leakage, short circuit, neutral break in mains/sub mains/ internal circuits of existing electrical system of main building/block and making continuous electric supply including carrying out minor repairs etc. required to make the system in order/functional with insulation tape roll, copper thimbles, glands, earthing wire as required at site complete all as specified and as directed. Notes :- This item is applicable only where no store is required. 1. Two electrician and One helper shall be provided by the contractor for attending daily complaints on working days including holidays/ sunday and shall report to MES complaint cell at 0830Hrs. 2. Contractor shall ensure the security passes for his staff, to be obtained from concern authority for attending complaints. 3. The MES department is not responsible for the payment of electrician as all the items of CA are to be supply and fixed by the contractor. 4. The contractor will ensure that the team of electricians with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. A recovery of Rs. 500/- per person shall be recovered from the contractor for non deploying of electrician and 300/-per person for helper on any working day. 6. All the complaint slip, register & other connected document will be provided by the contractor without any extra cost. 7. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained and shall be produce for verification at the time of payment of each RAR/Bill. 8. Fixing of BOQ item No. 2 to 25, 29 to 33, 47 & 48 are inclusive with quoted rate of this items.

Supply only in replacement of switch piano flush type 6 Amps SP one way Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of switch piano flush type 6 Amps SP 2-way Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement bell push, flush type 6 Amps Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of socket outlet 6 Amps flush mounted piano type 5 pin multi purpose Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of switch piano type 16 Amps SP one way Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of socket outlet 2 in 1 (multipurpose) 6 pin 6 and 16 Amps flush mounted type Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of electric bell (Buzzer) AC, 230 volts single phase Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of bell Ding dong type 230 volts single phase Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement ceiling rose surface Bakelite 65x25 mm two to three terminals Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of fan regulator electronic, stepped type, Switch type, suitable for ceiling fan 1200/1400mm sweep Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of fan condenser 2.5 Mfd Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of fan condenser 3.15 Mfd Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of 4 pin holder suitable for 36/18 Watts 4 pin type CFL fitting as per site requirement Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement CFL 36 watts 4 pin type 6500 K Complete all as specified and directed by Engineer-in-charge.

Supply only LED Glass Bulb 12 Watt B-22 Cap, AC 230V, 50 Hz, suitable for Batten Holder/Bulk head/SK light fittings in replacement of old unsv CFL light any watt Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement of Comfortable wall light fitting for LED Bulb B-22 Cap Complete all as specified and directed by Engineer-in-charge. Make: Philips/ Crompton Greaves/Bajaj/Halonix/Syska/C&S

Supply only in replacement of Wall mounted LED Integrated Batten T5 20 Watt - 4Ft White, indoor decorative PVC extruded T5 LED battern-Integrated type Complete all as specified and directed by Engineer-in-charge. Make: Cat part No HLB-07-20-CW-IP of Halonix or its equivalent in Bajaj/CG/Havells/C&S .

Supply only in replacement wall mounted LED Integrated Batten T5 10 watt - 2 Ft White, indoor decorative PVC extruded T5 LED battern -integrated type Complete all as specified and directed by Engineer-in-charge. Make:- Cat Part No HLB-07-10-CW-IP of Halonix or its equivlent in Havells/Bajaj/Philips/CG/Syska/C&S.

Supply only of LED 5 Watt batten type fitting, indoor decorative aluminium extruded T-5 LED Battern-integrated type (1 Ft) in replacement of old unsv existing 11Watt CFL light fitting, Complete all as specified and directed by Engineer-in-charge. Make:- Cat Part No HLB-07-05-CW-IP of Halonix or its equivalent as Havells/Bajaj/Philips/CG/Syska/C&S

Supply only LED Building security light fitting 30W on existing bracket in replacement of old unsv existing security light fitting any type Complete all as specified and directed by Engineer-in-charge. Make:- Cat Part No LTESSI45WLED of C&S Havells/CG/Bajaj/Phillips/Halonix/Syska).

Supply only in replacement of PVC insulated FRLS single core with stranded copper cable of size 1.5 Sqmm single core Red/Blue/Yellow&Black&green colour wiring as per site requirement Complete all as specified and directed by Engineer-in-charge. Make:- Polycab/Havells/Finolex

Supply only in replacement of PVC insulated FRLS single core with stranded copper cable of size 2.5 Sqmm single core Red/Blue/Yellow&Black&green colour wiring as per site requirement Complete all as specified and directed by Engineer-in-charge. Make:- Polycab/Havells/Finolex

Supply only in replacement PVC insulated FRLS single core with stranded copper cable of size 6 Sqmm single core Red/Blue/Yellow&Black&green colour wiring as per site requirement Complete all as specified and directed by Engineer-in-charge. Make : Polycab/Havells/Finolex

Taking down of old unserviceable ceiling fan/exhaust fan dismantling of blades, transportation to work shop and carrying out rewinding, transportation to site, reinstallation and testing Complete all as specified and directed by Engineer-in-charge. Note : Rewinding will be measured and paid separately under this Schedule.

M&L for Rewinding of ceiling fan 1200/ 1400 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required Complete all as specified and directed by Engineer-in-charge. Note : Gun metal bush, clamp, shaft, rod, bearing and painting of fan with good quality of synthetic enameled paint and marking he MES Number as per existing including lathe machine work if necessary to making a uppper/lower sheet of fan will be measured under of this item only.

All same as per ser item No. 29 above but exhaust fan 230/300 mm sweep

Supply only in replacement MCB DB SPN 8 Way double door type,(IP 43 Protection) flush mounting Complete all as specified and directed by Engineer-in-charge. (Make of DB : Legrand Cat No. 607711 or equivalent model of ABB /Indoasian)

Supply only in replacement MCCB 3 Pole 415V, Adjustable type, 125 Amps with breaking capacity 16 KA Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement for MCB SP 10 to 40 Amps 240 Volts, 10 KA, `C' curve, all as per site requirement Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement for MCB SPN/DP 63 Amps, 240 Volts, 10 KA, `C' curve, all as per site requirement Complete all as specified and directed by Engineer-in-charge.

Supply only in replacement MCB TPN/ Isolator 4P from 100 Amps 415 volts, 'C' Series 10 KA as per site requirement Complete all as specified and directed by Engineer-in-charge.

S&F in replacement' submain wiring PVC insulated FRLS single core with stranded copper cable of size 6 Sqmm in 2 runs and 6 Sqmm one run for earth drawing through existing PVC conduit 25 mm dia complete all as specified and directed by Engineer-in-charge. Note:- Two runs of main cable and one run of earth cable all-together shall be considered as one length)

S&F in replacement of distribution board vertical triple pole and neutral 4 way for fixing MCCB 125 Amps as incommer and MCBs as out goings with metal door and IP 43 Protections and connecting Complete all as specified and directed by Engineer-in-charge. ( Make : Legrand Cat Part No:- 607790 or its equivalent in ABB/Indoasian

M&L for earthing complete with GI earth plate electrode 600 x 600 x 6mm thick burried directly in ground in ground (earth pit plate less than 2.5 mtrs below ground level) with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade with funnel and locking arrangement complete all as specified and directed by Engineer-in-charge.

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicate dsituation for loop earthing etc. as required 4mm dia galvanised iron or steel wire Complete all as specified and directed by Engineer-in-charge.

Taking down carefully the old U/S Aluminium / Copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish Complete all as specified and directed by Engineer-in-charge.

M&L for point wiring complete, standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in and including concealed PVC conduit medium grade and sunk in new pressed steel terminal boxes of required size factory made and factory painted with stove enameled black paint with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly Complete all as specified and directed by Engineer-in-charge. for following : Note:-(I) the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash (ii) In existing conduit wiring new conduit will be added where there is a burnt/blokage/damage to the existing conduit including bends/elbow/tee junctoin box etc .

One light /fan/Bell point controlled by one way switch

One light point controlled by two 2-way switch 230 volts.

One 3 pin socket outlet 5 Amps independent board

One 3 pin socket outlet 5 Amps point on same board

One 3 pin socket outlet, 15 Amps on independent board with cable 2.5 Sqmm for main current and 1.5 sqmm as earth wire as power point.

S&F fan regulator electronic, stepped type, suitable for ceiling fan 1200/1400 mm sweep Complete all as specified and directed by Engineer-in-charge.

S&F switch piano flush type 6 Amps SP one way Complete all as specified and directed by Engineer-in-charge.

S&F switch piano flush type 6 Amps SP 2-way Complete all as specified and directed by Engineer-in-charge.

S&F socket outlet 6 Amps flush mounted piano type 5 pin multi purpose Complete all as specified and directed by Engineer-in-charge.

S&F switch piano type 16 Amps Single pole one way complete all as specified and directed by Engineer-in-charge.

S&F socket outlet 2 in 1 (multipurpose) 6 pin 6 and 16 Amps flush mounted type Complete all as specified and directed by Engineer-in-charge.

S&F bell push flush type 6 Amps Complete all as specified and directed by Engineer-in-charge.

Supply only 10 LED bulk head in engineering plastic housing with clear prismatic diffuser, 9/10W WHITE in replacement of old unsv bulk head/Sketch/LF fitting including all accessories connecting up twin core flexible copper conductor cable Complete all as specified and directed by Engineer-in-charge. Make:- Cat Part No HLBH-02-10CW of Halonix or its equivalent in C&S/Syska/Bajaj/Philips/CG/Havells.

Supply only in replacement of Surface mounting round shaped LED downlighter with durable housing with Al heat shrink with diffuser to give glare free light 6 Watt LED 6000K/6500K lamp type Complete all as specified and directed by Engineer-in-charge.. (Make: Cart Part No HLDLS-R06-CW of Halonix or its equivalent in Bajaj/CG/Havells/C&S .

S&F BLDC (Bruishless Direct Current) ceiling fan of 1200mm sweep, not less than 350 RPM and Air Delivery 215 cfm, Voltage 220V, high air flow with silence operation, having full copper motor & ribbed 3 Nos A/M blades. The BLDC motor fan shall have 100% rust-free blade. the fan shall have BEE 5 star rating and compliant with IS-374 and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed by Engr-in-Charge. Make:- Orient or its equivalent as specified make

S&F water heater storage type (Geyser) of capacity 50 ltrs, BEE 5 star, body of ABS plastic material, auto cat adjustable temperature, safety valve, thermal cut out input voltage 230 volts, power consumption 2 kw including all fittings 4 sets of nut, bolts and washers of monimum dia 10 mm, grouting in wall and making all electric and water connection. complete with heating element, thermostat,3 core lead, Plug top, safty valve, inluding electric and water connection and making good to disturbed surface complete all as specified and directed by Engr-in-Charge. Make : Havells/ Bajaj or its equivalent as specified make

S&F 15mm bore galvanised iron pipe medium grade with all fittings and fixtures fixed to wall and ceiling or laid in floor including connections complete all as specified and directed by Engr-in-Charge. Make : Jindal/Tata/Prakash Surya

S&F bib tap 15mm bore of cast copper alloy Chromium plated fancy type scrwed to iron pipe and fixed complete all as specified and directed by Engr-in-Charge. Make:- Kingston/Prayag/Hindustan.

S&F stopcock of 15 mm dia cast copper alloy Chromium plated fancy type screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. Make:- Kingston/Prayag/Hindustan.

Cutting chases for concealed water tubing or concealed conduct wiring etc and making good cutting n. exc 10cm girth in brick wall complete all as specified and directed by Engr-in-Charge.

Sub main wire using FRLS insulated unsheathed mulitistrand copper conductor FRLS PVC cable 2 runs of size 6 Sqmm for phase and neutral and 6 Sqmm for earthing drawn through rigid PVC casing caping/PVC condute pipe not less than 25mm dia fixed on wall/ground/ceiling etc and making good the disturbed surface to same the joining surface with OBD/ Colour Wash/ White Wash and complete all as specified and directed by Engr-in-Charge. Note:- Phase should be Red/Yellow /Blue, neutral should be black and earthing wire should be green colour. Two run of cable for phase /neutral and one run of cable for earth incl casing caping / conduit pipe will be measured and paid as one unit length.

S&F PVC connection with brass nipple 15 mm dia 600 mm long with ISI marked suitable for hot and cold water of 50 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles of size 350x250mm/450 x 350 x 7 mm thick laid on vertical surfaces such as skirting/ dado over 10mm thick in cement plaster 1:4 complete all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosure with plug top and socket 20 Amps with MCB SP complete all as specified and directed by Engr-in-Charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

verma enterprises

PD SHARMA AND SONS