REPAIR/MAINT OF INTERNAL ELECTRICAL FITTING AND FIXTURES AND ALL CONNECTED ITEMS IN OTM/MD ACCN CANTT AREA UNDER GE (I) KANPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed.

M&L for point wiring for one light point/fan/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated sheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size 25mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 2.00 above but upto ceiling height and on surface at ceiling complete all as specified and directed.

All as per item No 2.00 above but in existing conduit complete all as specified and directed.

All as per item No 2.00 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl conduit complete all as specified and directed.

All as per item No 2.00 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in existing conduit complete all as specified and directed.

All as per item No 2.00 above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed.

All as per item No 2.00 above but for one 3 pin 5A socket outlet independent controlled by one switch in existing conduit complete all as specified and directed.

All as per item No 2.00 above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

All as per item No 2.00 above but for one 5A socket outlet on the same board controlled by one switch in existing conduit complete all as specified and directed.

All as per item No 2.00 above but for one light point controlled by 2 nos two way switches complete all as specified and directed.

All as per item No 2.00 above but for one light point controlled by 2 nos two way switches in existing conduit complete all as specified and directed.

All as per item No 2.00 above but for one light/fan/bell point including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed.

All as per item No 2.00 above but for one socket outlet 5 Amps on Independent board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed.

All as per item No 2.00 above but for one socket outlet 5 Amps on same board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed.

All as per item No 2.00 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed.

All as per item No 2.00 above but for one light point controlled by two way switches including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed.

M&L for point wiring for one light point/fan/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated sheathed copper conductor single core multistranded cable (green colour) as earth lead in and including pvc casing & Caping with all fittings (ISI Marked) in appropriate size, controlled by one switch including CI/MS sunk box of required size & as directed & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 18 above but for one 3 pin 5 Amps socket outlet independent board with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl casing and caping complete all as specified and directed.

All as per item No 18 above but for one 3 pin 5 Amps socket outlet same board with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl casing and caping complete all as specified and directed.

All as per item No 18 above but for one 3 pin 15 Amps socket outlet independent board with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl casing and caping complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

All as per item No 22 above but in existing concealed conduit complete all as specified and directed.

All as per item No 22 above but for cable of size 6 sqmm and two single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit complete all as specified and directed.

All as per item No 22 above but for cable of size 6 sqmm and two single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm in existing concealed conduit with earth wire 4 sqmm complete all as specified and directed.

All as per item No 22 above but for cable of size 10 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 10 Sqmm in & including concealed PVC conduit complete all as specified and directed.

M&L for switch piano flush button single pole one way 5/6 amps 240 volts complete all as specified and directed.

S&F switch piano flush button single pole one way 15/16 amps 230 Volts complete all as specified and directed.

M&L for switch piano flush button single pole two way 5 amps 230 volts complete all as specified and directed.

M&L for bell push flush button single pole one way 5 amps 230 volts complete all as specified and directed.

M&L for socket 3 pin 5 Amp flush type, 230 volts complete all as specified and directed.

M&L for socket out let, 3 pin 15 amps flush type, 230 volts complete all as specified and directed.

M&L Modular switch 1 way 15/16A,230 Volts1 module complete all as specified and directed.

M&L Modular switch 1 way 6A, 230 Volts 1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module, 230 Volts complete all as specified and directed.

S&F Socket, 16A - 2/3 pin combined 2 module, 230 Volts complete all as specified and directed.

M&L for Modular bell push 1 Module one way 6 amps 230 volts complete all as specified and directed.

M&L Modular switch 2 way 6 A,230 Volts1 module complete all as specified and directed.

Supply and fixing in replacement modular 2 module fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

S&F Lamp holder insulated body with back plate for dome batten fittings, included LED lamp 12 watt having lumen 1200 power factor>.9 colour temperature 6500K CRI>80 protection class IP 20 suitabale for batten holder complete all as specified and directed.

M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete all as specified and directed.

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

S&F of LED Aluminium batten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95, THD<20%, Surge protection 3 KV in CM, IP-20n Protected, meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures.

S&F of LED PVC Batten is designed to provide light in 3 different colour options -cool white (6500K) , Natural White (4000K) and warm white (3000K) in the same batten.you can change the light colour as per your mood with the help of ON-OFF switch luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.90,Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed.

S&F in replacement of wall mounted Motion Sensor LED Batten switches ON by sensing the movement of a human being with-in a range of 15 feet and switches OFF automatically when no movement is detected within 15 feet, 6500K, surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.90, Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1, short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed.

S&F in replacement of LED mirror light fitting 10/12 Watt,2' long, with efficient heat dissipation and integrated electronic driver connecting electrically,Housing Polycarbonate, IP 20,PF More than 0.9 complete all as specified and directed.

S&F LED in repair wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W complete all as specified and directed.

S&F LED Bulkhead Warm White 10 watt housing made of engineering plastic luminaire with opal diffuser, equipped with 2kV in- built surge protection with IP 65 protection, inbuilt constant current driver, ID-65 Protection complete all as specified and directed.

S&F LED Bulkhead 10 watt housing made of engineering plastic luminaire with opal diffuser, equipped with 2kV in- built surge protection with IP 65 protection, inbuilt constant current driver, ID-65 Protection complete all as specified & directed.

Supply & Fix LED lamp 12 watt having lumen 1200 power factor>.9 colour temperature 6500K CRI>80 protection class IP 20 suitabale for batten holder complete all as specified and directed.

Supply & Fix LED lamp 9 watt having lumen 900 power factor>.9 colour temperature 6500K CRI>80 protection class IP 20 suitabale for batten holder complete all as specified and directed.

M&L for sheet metal enclosure MCB single pole and neutral with a two pin and earth plug and socket 25 amps 240 volts with one single pole MCB of 20 amps earthing complete all as specified and directed.

S&F in replacement of Modular AC Box with 20 A SP MCB Plastic enclosure & unbreakable heavy duty with ISI Plugtop complete all as specified and directed.

S&F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way with appropriate size copper bus bar and neutral link, complete with one MCCB 4 pole 415 Volts 125 Amps rating with rupturing cap 16 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site complete all as specified and directed.

Supply and fix sheet metal enclosure MCB distribution board, 4 way double door with IP-43 protection with 200 Amp rated bus bar complete all as specified and directed.

All as per item No 56.00 above but for 8 way complete all as specified and directed.

S&F amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) of SP 5 to 32 Amps and Current carrying capacity in the MCB DB with connection testing and commissioning complete all as specified and directed.

All as per item No 58.00 above but SPN 40 Amp complete all as specified and directed.

All as per item No 58.00 above but SPN 63 Amp complete all as specified and directed.

S&F in repair MCCB 4 Pole, 415 V, Adjustable type 100 amps with breaking capacity 16 KA complete all as specified and directed.

S&F in repair MCCB 4 Pole , 415 V, Adjustable type 125 amps with breaking capacity 25 KA complete all as specified and directed.

S&F in repair MCCB 4 Pole , 415 V, Adjustable type 160 amps with breaking capacity 25 KA complete all as specified and directed.

Supply and laying to wall or poles or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium multistranded conductor 10 sqmm nominal cross section twin core for service connections complete all as specified and directed.

All as per item No 64.00 above but cable of size 6 Sqmm 2 core complete all as specified and directed.

S&F in replacement of LED light fitting recess mounted 36 watt 2'x2' with all accessories, suitable for amstrong/grid/POP ceiling with integrated electronic driver and making electrical connection with 3 core copper wire to ceiling rose properly complete all as specified and directed.

S&F in replacement of LED light fitting surface mounted 36 watt 2'x2' with all accessories, suitable for amstrong/grid/POP ceiling complete with integrated electronic driver and making electrical connection with 3 core copper wire to ceiling rose properly complete all as specified and directed.

S&F in replacement of LED light fitting Ultra slim recess mounted 12 watt Square with all accessories, suitable for amstrong/grid/POP ceiling complete with integrated electronic driver and making electrical connection with 3 core copper wire to ceiling rose properly complete all as specified and directed.

S&F in replacement of LED light fitting Ultra slim recess mounted 12 watt round with all accessories , suitable for amstrong/grid/POP ceiling with integrated electronic driver and making electrical connection with 3 core copper wire to ceiling rose properly complete all as specified and directed.

S&F Emergency LED Lamp solution gets Automatically switched on during a power cut and runs effectively on 4 hours. power Factor more than 0.9, Protection Glass IP 20, bulbs 12 watt. complete all as specified and directed.

Supply & fix electronic meters temper proof LCD Display with poly carbonate cover 230 Volt 10-60 Amp accuracy class-I 50 Hz conforming to IS-13779 IP-54 with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed.

All as per item No 71.00 above but 3 phase 415 volt complete all as specified and directed.

G S SANDHU & CO. (BID ID -3471356)

Sagar Electricals (BID ID -3474744)

Vee Key Enterprises (BID ID -3474479)

A S ENTERPRISES (BID ID -3474848)

Himanshu Construction and Suppliers (BID ID -3474106)