Short term Remedial Measures to (1) Black Spot No. KA-(02)-90 (Honnahalli) from Km.15 to 16 of NH-63 and (2) Black Spot No KA-(02)-276 (Mastikatta) from Km.19 to 20 of NH-63 Ankola-Gooty Section in Karnataka under (Job No. NH-206-KNT-2016-17-809)

Amount

Using Bitumen 80/100 Grade (VG-10) Providing and applying Tack Coat as per Table 500-5 on prepared surface using 80/100 grade bitumen (VG-10) complying with IS 73 of approved quality and make including cleaning of road surface by Mechanical broom & dusting by air Compressor, and spraying by bitumen Pressure Distributor, including cost of all materials, labour, hire charges of machinery, loading, unloading, stacking, etc., complete, lead for bitumen. A) On Bituminous surfaces at 2.00 kg/10Sqm. as per direction of Engineer incharge of the work & all incidental charges.

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Providing and laying Bituminous Concrete using crushed stone aggregates as per table 500-16,17 of specified graded aggregates and filler (Cement) @ 2%by weight of aggregates, premixed with bituminous binder in Batch/hot mix plant, loading of aggregates with F.E. loader, transported to site in tipper to paver, laid over a previously prepared surface with paver finisher to the required grade, level, alignment, rolling with Smooth wheeled roller 8-10 tonnes, vibratory roller 8 tonnes, smooth wheeled tandem roller 6-8 tonnes as per clauses 501.6 and 501.7 to achieve the desired compaction, including cost of all materials, labour, hire charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc complete, except lead for Bitumen & with a lead of mixed material upto 1 Km excluding cost of primer/tack coat (Compacted thickness) Using 40-60 TPH Hot Mix plant with and Paver Finisher Hyderostatic with sensor control. GR-2 with 5.40% Bitumen ( 30-40mm complacted thickness (13.20mm nominal size). Using 60/70 Grade (VG-30) Bitumine, as per direction of Engineer incharge of the work & all incidental charges

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Retro-Reflectorised Traffic Signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory signs as per IRC: 67-2001 made of high intensity grade micro prismatic HIP type IV sheeting, fixed over aluminium sheeting, 2.00 mm thick firmly fixed to the ground by means of properly designed fondation with M-15 grade cement concretes 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The item includes earthwork excavation, cement concrete M-15 grade, 2 coats of approved colour synthetic enamel painting to the steel surface, as per clauses, including curing, cost of all materials, labour, loading, unloading, lead, lift, transporting, etc., complete. Supported on a class B GI pipe 80 mm dia. 3.50 mtrs long Type - IV sheeting as per direction of Engineer incharge & all incidental charges

90cm equilateral triangle

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

60 cm Circular

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

60 Cm x 60 Cm Sqaure

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Direction and Place Identification Signs with size more than 0.90 Sqm size Board. Providing and erecting dirction and place identification retro-reflectorised sign as per IRC: 67-2001 made of high intensity grade micro prismatic HIP type IV sheeting, fixed over aluminium sheeting, 2.00 mm thick with area exceeding 0.90 sqm firmly fixed to the ground by means of properly designed foundaton with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The item includes earthwork excavation, cement concrete M-15 grade, 2 coats of approved colour synthetic enamel painting to the steel surface, as per clauses, including curing, cost of all materials, labour, loading, unloading, lead, lift, transporting, etc., complete, Supported on a class "B"GI pipe 80mm dia, 3.50 Mtrs long. as per direction of Engineer incharge & all incidental charges.

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous SurfacePainting the road surface using approved quality Thermo plastic material (Homogneiously composed of aggregates, pigment, resings and glass reflectorising beeds) confirming to Clause-803.4.2.2 applied hot either by screeding or extension process at the rate of 5kg/sqmtr of painted surface using suitable machine capable of controlled preparation and laying with surface applicator of flass beads at 250gms/sqmtr allowing cooling to ambient pavement temperature, that shall produce an adherent pavement marking of minimum specified thickness of 2.5mm including barricading for traffic diversion as per IRC:35 cleaning the surface of dirt, dust and other foreign matter, demarcation at site, barricading for traffic diversion, traffic control inclding cost of all material, labour, loading, unloading, lead, lift, transporting etc., complete. as per direction of Engineer incharge. & all incidental charges.

Center line, Edge line & other markings

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Bar marking 5mm thk. (Traffic calming measures)

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Earthwork excavation for roadwork in soil by mechanical means with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location, unloading, with all lifts and lead upto 1000m including all labour, hire charges of all machineries etc., complete., as directed by the Engineer-in-charge of the work & all incidental charges.

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Providing, laying Plain/Rainforced Cement Concree M15 (1:2:4) in Open foundation using granite/trap/basalt aggregates of 20mm and downsize and clean sieved approved fine aggregates including mixing mechanically in Concrete Mixer laid in layers not exceeding 15cms thick layers, as per Drawing including cost of all materials, formwork, centring, vibrating, compacting, hire charges of machinery, lead, lift, loading, unloading, transporting, stacking, curing, finishing the exposed faces etc., complete. (including cost of steel and fabrication charges), as directed by the Engineer-in-charge of the work & all incidental charges.

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Metal Beam Crash Barrier Type-A,"W"Metal Beam Crash Barier Providing, erecting and fixing “W” metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete including cost of all materials, labour, loading, unloading, lead, lift, transporting etc., complete, as per direction of Engineer incharge & all incidental charges.

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Road Delineators: Providing, Supplying and installation of delineators(road way indicators, hazard markers, object markers), 80-100 cm high above groud levela painted black and white in 15 cm wide strips, fitted with 80x100 mm rectangular or 75mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming to IRC-79 as per drawings including cost of all materials,labour, loading, unloading, lead, lift, transporting etc., complete as per direction of Engineer incharge of the work & all incidental charges.

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Construction of Sub-grade and Earthen shoulders. Construction of sub-grade earthen shoulders withe approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No.300-2 in layers not exceeding 250mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., spreading by Dozer, grading by motor grader, consolidation by vibratory road roller including all leads, all lifts, loading, unloading, all labour, hire charges of all machinery etc., complete. as per direction of Engineer incharge & all incidental charges.

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

Road Studs with Lense Reflector: Providing and fixing of road stud 100x100 dia cast in aluminium, resistant to corrosive effect of salt and grit,fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973 including cost of all materials, labour, loading, unloaidng, lead, lift, transporting etc., complete as per direction of Engineer incharge of the work & all incidental charges.

Black Spot KA-(02)-90 ( Ch. Km.15 to Km.16 of NH-63)

Black Spot KA-(02)-276( Ch. Km.19to Km.20 of NH-63)

MS A S PATIL ENGINEER AND CONTRACTORS

M/s Ramshree Global Constructions Pvt. Ltd.

Bidder Name

N R NAYAK

M/s Ramshree Global Constructions Pvt. Ltd.

MS A S PATIL ENGINEER AND CONTRACTORS